I troductio
Congratulations on your purchase of this product.
This User Guide suits DH C5240S series
product.We adopt the latest technical of sensor and
driver. The most attractive characteristics are water
resistant, and widely applicable to day & night, indoor &
outdoor. In addition, it owns the characters of high
definition and stability, strong anti jamming, rich and real
color. Fixing and using this model are convenient too. It is
very good for you to apply to yours CCTV system.
Please read this instruction manual carefully to
ensure proper use of the product.
CONNECTING
Brief of product
* Se sor
1/3” SONY CMOS
* Auto Gai Co trol (AGC)
Built in auto gain control (AGC) circuit. The color camera
can get high definition picture in low Lux condition.
* Auto Electro ic Shutter (AES)
Built in auto electronic shutter function. The color
camera’s AES speed can reach 1/100,000s.
* Gamma Characteristic
Camera Gamma characteristic is 0.45.
* Sca i g Mode
NTSC or PAL mode.
* Night-time Visio
0 Lux with IR LED ON. Adopt TaiWan high quality IR
LED, having very good night vision effect.
Trouble a d solutio
Note:
● Please note the camera’s operating temperature and its using
environment requirement. Avoid using the camera at too high or
too low temperatures. The operating temperature is 10 50 . ℃ ℃
(Recommendatory operating temperature is 5 40 .) ℃ ℃
● Never make the camera face the sun or bright object. Otherwise,
it will damage the CCD.
● Do not mount the camera near by the radiator or heater.
1. No Picture after providi g power
. May be the power supply voltage abnormity, please check the power
supply voltage and pole whether exactitude.
. Please check all the connecting cable and monitors whether be connected
correctly or not.
2. The picture level directio have flowi g i terfere ce ripples
. May be caused by the power supply AC ripples, it need filter the wave of the
power supply.
. Check the monitor and peripheral equipments used.
3. The picture backgrou d color cha ges co ti uously
. The fluorescent lamp’s electromagnetic field cause color roll. This is proper
phenomenon of the cameras.
. Reduce the fluorescent lamp numbers or increase the distance between the
camera and the fluorescent lamps can improve it.
. Use power supply external sync. camera can solve it.
4. The picture smear too mass
. The power supply’s voltage unstable.
. Connecting cables not connect correctly or have high impedance.
To prevent fire or shock hazarded. Do not expose the unit
rain
The symbol is intended to alert the user to the presence of
important
The symbol is intended to alert the user to the presence of
into water too long time directly.
.
important operating and maintenance (servicing)
Instructions in the literature accompanying the appliance.
uninsulated ‘dangerous voltage’ within the product’s
enclosure that may be of sufficient Magnitude to
constitute
a risk of electric shock to persons.
Notes ：
●The power supply must through safe attestation. Its output
voltage 、current 、voltage polarity and operating temperature must
match the camera’s requirement.
●When using the camera in the thunderbolt condition,please note to
mount Anti thunder device or put off the power supply plug and cable.
●In order to capture high quality pictures, the power supply’s cable and
video output cable should not be too long.
CAUTION:
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER OR BANCK NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO OUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC. DO NOT OPEN
CAUTION:
To preve t electric shocks a d risk of fire hazards,
do NOT use other tha specified power source.
DC12V Power Supply
Monitor
Link wire rule ：
Power
Video(YELLOW)
MOUNTING
Video
12V DC
HD-SDI Video(BLACK)
HD SDI Video
or
HD Monitor
HD SDI DVR
HD SDI CONVERTE
