Omlet Eglu Go Up User manual

www.omlet.co.ukPage 1
Contents of Extension box
Page 1 www.omlet.co.uk
Fixings Bag
73x Run Clip
810.0013
7x Double Run Clip
810.0001
PLEASE READ CAREFULLY
Eglu Go Up Extension Instruction Manual
Step 1 - Unclip the end of your run
Top Panel Front
017.1085
x2
Skirt Extension
017.1100
x2
Run Extension Support
017.1101
x2
Side Panel
017.1084
x4
If you already have a complete Eglu Go Up run,
you will need to unclip the end and corner skirts.
(Keep the clips, you will need them later.)
Also, remove the feeder and drinker.
Your run will then look the picture to the right.
If you are building an extended Eglu Go Up
proceed to Step 2.
# 820.1208

www.omlet.co.uk Page 2
If you have any problems assembling your Eglu Go
call us on 0845 450 20 56 or email [email protected]
Step 2 - Attach Side Panels and Run Extension Supports
Step 3 - Attach Top Panels
Clip on 2 Side Panels and 1 Run Extension Supports.
REPEAT ON OTHER SIDE
Side Panel
017.1084
Clip on 2 Top Panels.
Top Panel Front
017.1085
Run Extension Support
017.1101

www.omlet.co.uk
If you have any problems assembling your Eglu Go
call us on 0845 450 20 56 or email [email protected]
Page 3
Step 4 - Attach Extension Skirt Panels
Step 5 - Re-attach the panels removed in Step 1
If you are building an extended Go
Up from scratch, return to the full
instruction manual to complete
your run.
If you are adding more extensions,
repeat Steps 2 to 4.
Re-attach the end of the run using
the clips that were holding it
on before.
Clip on 2 Skirt Extensions.
Skirt Extension
017.1100
Skirt Extension
017.1100

If you have any problems assembling your Eglu Go
call us on 0845 450 20 56 or email [email protected]
www.omlet.co.uk Page 4
Diagram Showing all Run Clip locations
Single Clip Double Clip
Key: