Onix OPN-815 User manual

1
Network ip CAMERA
OPN-815/825
User’s Manual
(Version1.2)

2
Introduction
The OPN -815/825 is a Network Camera Server with a built-in MPEG-4 CODEC and
Streaming Server. The advantages of the MPEG-4 CODEC and the built in Streaming server
allows you to monitor real time image from a remote location, via Internet. OPN -815/825
server features the Sensor Input, Relay Output, RS232C port, and is designed to control the
Pan/Tilt/Zoom functions of the cameras. These functions are compatible with PLC and may
be utilized to control various Electronic Appliances.
The OPN -815/825 supports both Static IP and Dynamic IP, and can change Communication
Port, resulting in one IP address supporting multiple OPN -815/825 servers.
In summary, The OPN -815/825 server system provides multiple access/control options to the user.
The examples of access/controls are as follows:
¾To get SMS message through Mobile Phone and E-mail message from PC upon event.
¾To record Event in FTP server installed in remote place or OPN -815/825.
¾To search / delete / down-load / replay the recorded video.
¾To support various wireless devices such as Mobile Phone, PDA to see real time Video in
Wireless Internet handset.
For more information or inquiry, please contact us to the followings ;
Home Page : www.onix.co.kr
e-mail : [email protected]
Telephone ; 82-2-839-5544
Fax : [phone]
Address : 8F, ACE ⅧBldg.,191-7, Guro-dong, Guro-gu, Seoul, 152-780, Korea
Software, Server and service may be charged according to change of policy or may be stopped
without prior notification. Appearance, function and specification may be changed
without prior notification. Our company assumes no responsibility for visible or
invisible loss resulted from changes in policy or products.

3
IMPORTANT NOTES
OPN -815/825 may be damaged by electrical and physical shock. DO NOT throw
or drop it onto floor.
DO NOT put TV or heavy items on OPN -815/825.
OPN -815/825 is indoor use only. If it is used outdoor, it is required to use the
separate case to maintain water-proof, humidity-proof and control proper
temperature around the unit.
In case OPN -815/825 fails, DO NOT try to disassemble the product. Contact or
consult the distributor or Head Office for after-sale service. There may be no
Quality Assurance for the product disassembled without an authorization from
the distributor or Head Office.
DO NOT use this product in connection with life related devices, i.e., medical apparatus.
In case OPN -815/825 is installed at high location, be sure to mount securely to
prevent the unit from falling below.

4
Contents
1. FEATURE ……………………………………………………………….………6
1.1.P ACKAGE ……………………………………………………………………………..……….…6
1.2.
O UTER V IEW ………………………………………………………………………..……..…...7
1.2.1.Web board view ……………………………………………. …………………………………………...7
1.2.2.Connection cable view ……………………………………. ………………………...…………..……...8
2. INSTALLATION AND VIDEO CHECK………………………………………12
2.1.I NSTALLATION …………………………………………………………………………….….…12
2.2.V
IDEO C HECK …………………………………………………………………….……………12
3. BASIC SETTING………………………………………………………………16
3.1.C HECK N ETWORK AND I NSTALLATION T YPE ……………………………………………………16
3.2.I
NSTALLATION WITHOUT IP SHARING DEVICE (R OUTER )……………………………….……….16
3.2.1.Static IP Setup……………………………………………………………………………………….………..16
3.2.2.Dynamic IP Setup……………………………………………………………..………………….……..……20
3.3.I NSTALLATION WITH IP S HARING D EVICE (R OUTER )…………………………………………...22
3.4.C
AUTIONS ……………………………………………………………………………….……….25
4. EXPERT SETTING………………………………………………………………26
4.1.G ENERAL S ETTING …………………………………………………………………………..……..27
4.1.1.Title Setting………………………………………………………………………………..……..……...………27
4.1.2.Administrator’s ID and Password Change………………………………………………..………………….27
4.1.3.User Registration…………………………………………………………………………………….…………28
4.1.4.User List and Delete…………………………………………………………………………………...……….28
4.1.5.Skip Login (Automatic Monitoring) ………………………………………………………….….…………..29
4.1.6.Time Zone Setting ……………………………………………………………………………..………………29
4.1.7.Set Download Route of Plug-in Type ActiveX……………………………………..………………………...30
4.1.8.Select Language………………………………………………………………………………..………..……..30
4.2.N ETWORK S ETTING …………………………………………………………………….…….……30
4.3.V
IDEO & A UDIO S ETTING …………………………………………………………………..………31
4.3.1.Video Setting…………………………………………………….……………………….……………………..31
4.3.2.Audio Setting…………………………………………………………….…………………………….………..32
4.4.C OLOR S ETTING …………………………………………………………..……………………….33
4.5.A
LARM S ETTING ……………………………………………………………………..…………….33
4.5.1.Alarm Event Setting……………………………………………………………………………..……………..33
4.5.2.Alarm Event Test…………………………………………………………………..…………..……………….34
4.6.DIO S ETTING …………………………………………………………………………..………….35
4.7.RS232C
S ETTING ……………………………………………………………………..………….36
4.8.P
RESET S ETTING ………………………………………………………………………….………...37

5
4.9.H OMEPAGE U PDATE ………………………………………………………………………………...38
4.10.F
IRMWARE U PDATE ……………………………………………………………………….….……38
4.10.1.Remote Upgrade………………………………………………………………………………...….………38
4.10.2.System Re-booting………………………………………………………..…………………..……………40
5. BASIC USE………………………………………………………….……………41
5.1.U SE OF W EB V IEWER …………………………………………………………….………………..41
5.2.U
SE OF IP S ETTING U TILITY ……………………………………………………….………………44
5.3.U
SE OF S ERVER …………………………………………………………………….………………48
5.4.U
SE OF R ELAY ……………………………………………………………………………….……….48
5.5.U
SE OF S ENSOR ……………………………………………………………………………….……..49
5.6.S
EE AND C ONTROL OF S TILL I MAGE IN M OBILE OR PDA …………………………………….……..50
5.7.U
SE OF P ROPRIETARY V IEWER ( IP CAMERA)……………………………………………….…….50
5.7.1. Required Specification of PC and ……………………………………………….…..…..50
5.7.2. Supported ……………………………………………………………………..…….…….50
5.7.3. PROGRAM INSTALLATION…………………………………….……..……….…….……….51
5.7.4.
Use of Program ………………………………………………………………………71
6. NETWORK ENVIRONMENTS………………………………………….…….61
7. APPENDIX………………………………………………………………….……62

6
1. Feature
1.1 Package
Please see the package as follows.
OPN -815/825 Adapter User Manual
Software CD Cross Cable
Package of Products is composed of main body of product, exclusive Adapter, User Manual,
Software CD, Cross Cable (see the above). Please check before starting installation. Be sure to
use the provided Adapter exclusively for OPN -815/825. In case any problem occurs by use of
other adaptors, we assume no responsibility or liability. The Cross Cable is used only for Pre-View
of Video before set-up and change of Network Information.

7
1.2 Outer View
1.2.1 Web board view
Pic. 1―1 Wed board View
1) POWER: Light on when power is supplied.
2) LINK: Light on when LAN Cable is connected to OPN -815/825.
3) LAN: Light on when connected to Network .
①
②
③

8
1.2.2 Connection cable view
Pic. 1―2 Connection Cable View
1) Camera Port: To connect Camera, Output of the same video signal that put into the Video Input Port.
U484 Power loop out /Video input Connector from Camera Module
2) Power Supply & Video Composite Output : Excusive (provided) Adapter only,
Video composite signal(with 75ΩDrive) to CCTV Monitor.
Input port to connect with signal output from Camera, VTR, Quad, DVR
U485 Power input / Video Loop output to External Connector
④
⑤
⑥
②①
③
⑦⑧

9
.1
.2
.3
.4
U485
Molex 35362-04(2mm)
VIDEO_LOOP_OUT
VIDEO_LOOPOUT_GND
+
C31
470uF/6V(cap8d)
CA21
104
12V
.1
.2
.3
.4
U484
Molex 35362-04(2mm)
COMP_VIDEO
COMP_VIDEO_GND
3) LAN Port : To connect LAN Cable port for Internet to connect to Internet
U472 LAN Connector
LINK_LED_Cathode
TPTX+
TPR X-
TPR X+
TPTX-
.1
.2
.3
.4
.5
.6
U472
Molex 55456-6
LINK_LED_Cathode
3.3V
Frqqhfwlrq#zlwk#UM078#Frqqhfwru#
X7:5# UM078#
4# 4#
5# 5#
6# 6#
7# 9#

10
4) Relay Output: Output port with embedded Relay.
U471 MIC input / SPK output / Relay Control output
RELAY_CT0_NRELAY_CT0_N
RELAY_CT1_N
RELAY_CT1_NRELAY_CT1_N
MI C I NMI C I NMI C I NMI C I NMI C I NMI C I N
AUDIO_MIXED AUDIO_MIXED
AUD_5V
RZ6
6.8K
MI C I N
MI C I NMI C I NMI C I NMI C I N
.1
.2
.3
.4
.5
.6
U471
Molex 55456-6
RELAY_CT0_N
12V
AU_A
5) Sensor Input : Sensor Input port, to be set in Inner Setting and to be used without regard to N/C or N/O
U465 Sensor Input (Dry Contact)
SENSOR_2
SENSOR_2SENSOR_2SENSOR_2SENSOR_2SENSOR_2SENSOR_2SENSOR_2SENSOR_2SENSOR_2SENSOR_2SENSOR_2SENSOR_2SENSOR_2SENSOR_2SENSOR_2SENSOR_2SENSOR_2SENSOR_2SENSOR_2SENSOR_2
.1
.2
.3
.4
.5
.6
U465
Molex 55456-6
SENSOR_1
6) RS485 Port : Input / Output Port of RS485
U464 UART Debug Port + RS-485 P/T/Z Control Port