Oprema Air Pump User manual

USER MANUAL
Air Pump
EN
Oprema d.d.
Gospodarska 5
42230 Ludbreg
Hrvatska / Croatia
[phone]
E-mail: [e-mail]
Web: www.oprema.com
Original instructions v1.0 (04/2017)
Code 699186
Catering equipment

Introduction
EN
SIGNS USED IN MANUAL
Points out, on or around device, potential risk of serious injury for user and generally persons
in the area, great attention and work with caution are needed.
Points out that device is under voltage. Before any work always unplug the cooling unit from
electrical installation to prevent damages and injuries.
Contains information that helps ensure correct performance of cooling unit.
Check “important security notes” (code 399036), attached to this manual
This manual refers to the standard versions of devices

This manual contains instructions for installation, usage and handling with air pump device. It is a part of the
device, it has to be stored close to device and it helps technical staff during every movement or installation. Before
installation and usage of unit, please read carefully this manual with all necessary information to ensure correct
and safe installation.
USER INSTRUCTIONS
REGULATORY COMPLIANCE
Company Oprema d.d. is manufacturer of professional cooling units for catering, with special accent on
cooling units for cooling and dispensing beer, juices, wine, water and sparkling water. Quality, environment,
health protection, work safety management policy, product safety and all components that are in contact with
the beverage is the basic of process management in Oprema d.d..
This product meets all basic demands of EU legislation which are relevant to this product
Within European Union, all cooling units are harmonized with following directives:
Directive 2006/95/EC (LVD) – electrical safety of cooling units (low voltage equipment)
Directive 2004/108/EC (EMC) – electromagnetic compatibility
Danger
!
Warning
Notes
!
Warning
Notes
2

<page nr>
General Information
EN
COOLING UNIT MARKS AND CHARACTERISTICS
Every unit has its own identification number/code. This number is on the plate/label “technical data”.
Plate/label with technical data is the only way to identify unit; consists all necessary data about unit which
are relevant to the user/service people for quick and simple identification.
This manual is valid for following unit:
PUMPA ZRAČNA (AIR PUMP)
WARRANTY
Warranty on device is valid for 12 month from date of production, except if is not agreed different by contract.
We recommend to save original box, packing material and invoice at least during the warranty period.
When unit is unpacked, it is necessary to check if it looks in proper condition (undamaged visually). In case
of any doubt on damage of unit within packaging, do not install and use the unit. During packing
postponement we ask you to respect local legislation concerning packing postponement. Do not incinerate packing
parts or throw them to the environment. Packing of this cooling unit can be recycled in total. Keep packing
material away from children.
It is important to handle with care during loading and unloading to avoid damage of the unit.
- DO NOT turn around the unit
- DO NOT shake the unit or complete packing
TRANSPORT AND STORAGE
PACKING POSTPONEMENT
1. Type: name of the unit
2. Model: unit model
3. Serial number: serial number of unit
4. Code: unit identification code
5. Climate class: climate class
6. (V): voltage in volts
7. (Hz): frequency in Herz
8. Power: electricity in kW during normal work
9. Run: current in Ampers during normal work
10. Weight: weight of unpacked unit in kg
11. Quality control: unit is tested for secure usage
12. Oprema: manufactured in Oprema d.d. (with destroying
and removing this label you lose warranty)
11 12
CODE
(V) (Hz) POWER (kW) RUN (A)
CLIMATE CLASS
WEIGHT (kg)
SERIAL N°
TP05_OUL
Made in Croatia, EU
TYPE MODEL
Oprema d.d. Gospodarska ulica 5
42230 Ludbreg - Croatia
3

<page nr>
Instalation and service
EN
!
Warning
In accordance to valid legislation, installation and putting device to function, has to be done
exclusively by authorized and adequate trained personal.
Device has to be positioned on straight and airy space.
Air line from the air pump needs to be connected to the keg head firmly connected to the barrel. Wished
dispense flow is set depending on the pressure of compressed air adjusted on pressure regulator.
Device is produced with single phase cable, so it is necessary to assure grounded socket with voltage 230V/240V
50Hz/60Hz. Deviation of voltage can not be more than 10% because this can cause damage of electrical
components.
Maintenance and service
Air filter needs to be changed according to need, recommended is once a year.
In purpose of your security and in accordance with valid legislation, all repairs needs to be done by official
personal.
Danger
During cleaning or service, device needs to be unplugged from power
Part Code
1 Air pump 341168
2 Check valve 326058
3 Air pressure
regulator 345006
4 Steam elbow
3/8" 328110
5 Equal elbow
3/8" 328234
6 Air filter 328464
7 JG Tee 328242
8 Bulkhead
adaptor 3/8 " 328019
4

<page nr>
Instalation and Maintenance
EN
5

EN Maintenance
!
Warning While doing the disassembling it is important to comply with regulations.
- Steel, plastic and other materials should be disposed by the person that is authorized for this
- Insulation material should be disposed by the authorized company and persons
Considering the Regulations on waste of the electric and electronic units, and EU directive 2002/96/EC,
symbol of the bucket that is crossed on the equipment or packing shows that the product after end of the life
cycle must be separated from other waste, and that is related to the usage of the electric and electronical
equipment and properly waste disposal. Separated collection and recycling this kind of the equipment helps
to avoid possible negative influence on the environment and health, and also helps to use again or recycle
some of the materials that were used to set the equipment. Unauthorized disposal this type of the product
takes possibility to apply the legal penalties in accordance with current legal regulations.
TROUBLESHOOTING
FAULT DESCRIPTION POSSIBLE REASON REPAIR DESCRIPTION
1. Air pump does not work The pump ON/OFF switch is off Turn the switch on
Air pump disconnected from the
electric Main supply Connect the air pump
Desired air pressure is reached in
the KEG
When desired air pressure is reached in the
keg, pressure regulator automatically shuts
off the air pump
2. Air pump does work continuously
without reaching desired pressure Dispensing in progress
Air filter jamed Replace air filter
3. Tubing is leaking Replace damage tube
4. Beverage flow during dispensing is
to low
Increase air pressure on the pressure
regulator
6

<page nr>
EN Electric scheme
7