optonica 9357 User manual

Instruction Manual
SOLAR LAWN LIGHT

Lamp Size(mm) Φ126*51.8
SKU 9357,9358,9359
Item Product parameter
9357, 9358 9359-RGB
Solar panels
Light control Turn off the lights during the day tocharge, turn on the
lights to discharge at night
Product structure
Touch the switch to control the induction mode, switch in a loop, after the mode has been
selected, there is no need toswitch again.
SKU: 9357,9358,：
1) Press the button to enter 6500K mode: when the button is pressed, the lamp body is
on for 2S. The light is automatically turned on when it is dark, and the light is turned off
during the day to charge.
2) Press again to enter 4400K mode: when the button is pressed, the lamp body will be on
for 2S. The light is automatically turned on when it is dark, and the light is turned off
during the day to charge.
Product parameter
Product Control Mode
Polysilicon 5.0V/1W，Φ115*2mm

4) Press again to enter the off mode: the light can be charged but the light does not turn on
in thedark
SKU 9359-RGB：
1) Press again to enter RGB mode: when the button is pressed, the lamp body will be on for
2S. The light is automatically turned on when it is dark, and the light is turned off during the
day to charge.
2) Press again to enter the off mode: the light can be charged but the light does not turn on
in the dark
1) This product is solar photovoltaic lighting, green environmental protection, low
voltage safety
2) Widely used in courtyards, lawns, gardens and other places
3) Please place the lamp directly in the sun to charge for at least 6 hoursbefore use
4) Automatically charge during the day, automatically start and light up at night
5) Easy to install, no wiring, no power connection and complicated installation process
6) When installing, please install the lamp in a place with strong sunlight and pay
attention to the installation angle to ensure that the solar photovoltaic panel has enough
sunlight to charge the battery
7) The charging effect of solar photovoltaic panels depends on sunlight exposure,
lighting time and weather conditions. The stronger the sunshine, the faster the solar
photovoltaic panels are charged. In rainy or cloudy days, the charging effect will be
weakened, and the lighting time will be shortened
8) Internal charging overvoltage protection and low voltage discharge protection.
Products Instructions

1) Insert the ground plastic tube into the bracket tube
2) Insert the lamp to the position that needs to be illuminated
3) Press the switch toselect the gear
- Please keep the installation tools away from children
- Contains batteries, batteries are recyclable, please do not throw them away
- Contains batteries, the product is strictly prohibiten to be placed on fire, it may
explode.
- Please do not connect to 110-220V alternating current to avoid damage to the lamp
body
- Please install on a flat and stable surface, and fix the photovoltaic panel and the lamp
body to prevent wind or other reasons from hurting people
- In order not to affect the use effect, clean up the dust or debris on the surface on the
solar photovoltaic panel every 3-4 months
- In autumn, winter, continuous cloudy or rainy days, the charging effect will be
weakened
- and whe lighting time will be shortened, which is normal
- Avoid installing lamps near air conditioners, heating objects, or high-voltage power
grid systems.
IMPORTER: Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144, Ground Floor; Phone: [phone];
Installation Instructions
Important Notice