Orascoptic Zeon Discovery User manual

Portable LED Light System
User Manual

P/N 960813
OPERATING INSTRUCTIONS
Discovery™ Portable LED Light System
Table of Contents
1. Components .................................................... 2
2. Zeon Discovery Controls and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3. Charge the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4. Operate the Zeon Discovery Lighting System . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
5. Technical Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
6. SafetyPrecautions/Warnings ...................................... 7
7. DisposalInstructions.............................................. 8
8. Clean the Headlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
9. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
10 ReplacementParts ............................................... 10
11. Limited Manufacturer’s Warranty..................................... 10
Congratulations on your purchase of the Zeon® Discovery™ portable light-
emitting diode (LED) lighting system. The high-capacity illumination unit, which
represents the most modern LED technology, was developed especially for use
in dental practices.
Please read these instructions carefully before using the unit. Follow the
procedures described in order to optimize the lifespan and functionality of the
components of the Zeon Discovery illumination system.
1

2
1. Components
1. Battery Pack
Check to see that the following components are
included in the packaging:
This unit contains an integrated Lithium Ion battery,
an on/off control button (1), and a light intensity
control button (2).
OPERATING INSTRUCTIONS
Discovery™ Portable LED Light System
2. LED Light Cable
The five components of the LED light cable are as
follows:
• Headlamp(3)
• MountingJawClip(4)
• GownClip(5)
• Plug(6)
• Grommet(notpictured)
Note: Temple clips (not pictured) suitable for use
with your specific frame are also included.
3. Power Supply/Battery Charger
When plugged into the electrical outlet and the
battery pack, the light (7) located on top of the power
supply will indicate the charging state of the battery.
The power supply is provided with the following four
electrical outlet adapters:
• UnitedStates
• UnitedKingdom
• Europe
• Australia
Insert the appropriate adapater into the power supply
based on your geographic region.
4
3
5
6
7
2
1

OPERATING INSTRUCTIONS
Discovery™ Portable LED Light System
2. Zeon Discovery Controls and Connectors
1. On/Off Control Button (1)
Turns the LED on and off.
3. LED Cable Socket
The LED cable plug (4) fits into the battery pack in
this socket (3).
4. Curing Filter
The curing filter is intended to be used when working
with light-cured polymers. When working with
these materials, unfiltered light from the headlight
could cause premature curing of the polymer. The
figure to the right shows the filter installed (8) over a
headlight.
8
1
3
2. Light Intensity Control Button (2)
Adjustslightoutputbetweenthreeintensitysettings;
LOW(3,000footcandles),MEDIUM(5,000foot
candles),andHIGH(7,000footcandles).
4
3
2

The Zeon Discovery battery is not completely
charged on delivery. The battery must be charged
for at least 3 hours before its first use. Beyond the
initial charge, no battery conditioning is required.
1. Plug the charger into the battery pack.
2. Plug the charger into the electrical outlet.
3. While charging, the light (1) on the charging unit
will show red. When the battery is fully charged,
the light will be green and the charger will switch
to a maintenance mode.
4. Install the correct adapter:
• UnitedStates–110V
• Europe–220V
• UnitedKingdom–240V
• Australia–240V
3. Charge The Battery
OPERATING INSTRUCTIONS
Discovery™ Portable LED Light System
4. Battery Charger Connection Port (5)
The battery charger connects to this port. The plug
is a concentric design that fits in any orientation. 5
5. Battery Capacity Monitor (6)
Light will turn on, and a short beep will sound when
battery life is down to ten minutes. The beep will
reoccur every minute until the battery enters a shut-
down mode. During shut-down mode, the light will
blink, indicating that the battery has depleted its
capacity.
4
6
1

OPERATING INSTRUCTIONS
Discovery™ Portable LED Light System
4. Operate the Zeon Discovery Lighting System
1. AttachtheLEDheadlighttoyourloupe(1)
bytighteningthejawsofthemountinghinge
to the mounting block on the bridge of your
loupe frame. (You may have to first attach the
mounting block to your loupe frame if it is not
already attached.)
2. Insert the cable grommet through the cable
guide (2) and rotate the grommet so that is locks
in place.
3. Secure the cable to the temple using the
supplied temple clip.
4. Puttheloupe/lightonandadjustittoa
comfortable working position.
5. Secure the cable with the gown clip (3) so that
the cable does not hinder the view or the work of
the user.
6. Connect the cable to the control unit as
previously described.
7. Press the “On” control button on the unit to turn
on the light.
8. When using the light, or when storing the unit,
never bend the cable tightly to avoid damaging
the cable.
2
3
5
1

OPERATING INSTRUCTIONS
Discovery™ Portable LED Light System
5. Technical Data
Weightofthereectorlamp Approximately0.7ounces(20grams)
Weight of control unit Approximately8.5ounces(240grams)
Diameterofthereectorlamp Approximately1.0inch(26mm)
Dimensions of control unit Heightapproximately3.8inches(97mm)
Widthapproximately2.5inches(64mm)
Depthapproximately1.0inch(26mm)
Equipment class
Ingress of water (ordinary equipment) IXPØ
Battery type Li-Ionbattery,7.4V/2,400mAh
Battery charge time 3 hours
Battery life Low–approximately17hours
Medium–approximately10hours
High–approximately7hours
Light intensity Measured at a distance of 12 inches:
Low–3,000footcandles
Medium–5,000footcandles
High–7,000footcandles
Operation mode Continuous
EMC IEC60601-1-2, Class B, EN55011
Safety IEC 60601-1
Protection from shock Internally powered
Temperature for operation and
storage
32° to 95° F (0° to 35° C)
9. Install the curing filter (if needed).
a) Slide the filter’s frame over the outer rib of the
headlight so that the hinged frame can flip down in
front of the headlight as shown in the figure to the
right.
b) Slide the filter into the groove provided in the hinged
frame.
c) The filter can now be flipped down in a position in
front of the headlight.
II
6
Type BF

OPERATING INSTRUCTIONS
Discovery™ Portable LED Light System
Technical Data – Continued
6. Safety Precautions/Warnings
1. OnlyOrascoptic–suppliedpowersupplies(partnumberAL-DISCOVERY-CHG)aretobe
used to power the Zeon Discovery LED battery.
2. In order to avoid the risk of permanent eye damage, do not look directly into the headlight or
aim the headlight directly into someone’s eyes. Consider providing patients with protective
eyewear.
3. Thecontrolunitandthebatterymustbeusedexclusivelyforthepurposedescribed.
4. Undernocircumstancesshouldyouopenthehousingofthechargerorthecontrolunit.
Never take the devices apart or undertake modifications.
Misuseofthebatterycancausethebatterytobecomehot,explode,origniteandmay
causeseriousinjury.Makesurethatthefollowingsafetyprecautionsareexpresslyfollowed:
• Neveropenthebatterychargerorcontrolunit.
• Nevermakeanychanges/modificationstothebatterychargerorcontrolunit.
• Donotbringthebatterychargerorcontrolunitintocontactwithfireorsevereheat(over
158°F or 70°C).
• Donotuseoutside.
• Donotshortcircuit(donotconnectviaaconductororreversepolarity).
• Protectfromfluidsanddampenvironments.
• Donotuseadamageddevice.
• Maintainstorageandoperationaltemperatureof32˚Fto95˚F(0°to35°C).
Relative Humidity: 10% to 85% (non-condensing)
AtmosphericPressure 0.5atm to 1.0atm (500-hPa to 1060-hPa)
The Waste Electrical and
Electronic Equipment (WEEE)
Directive symbol. Do not dispose
of this product as normal trash.
Equipment class 1
Electric shock class
Alternatingcurrent
Direct current
Symbols Key:
II
- - -
~
7
Type BF

OPERATING INSTRUCTIONS
Discovery™ Portable LED Light System
5. Never try to use non-Orascoptic-supplied charger units or control units.
6. The charger must never be used outside.
7. Do not use the control or charger units if the housing or plugs are damaged.
8. If you determine that the charger or control unit is hot, emits an odor, or changes color or
shape, turn it off immediately and disconnect from the power network. The device may not
be used again and must be immediately returned to Orascoptic.
9. Do not store within reach of children.
7. Disposal Instructions
WearecertainthatyouwillreceivemanyyearsofexceptionalservicefromtheDiscovery
product. But, it is inevitable that at some time in the future you will need to dispose of it.
When that time comes, we encourage you to return it to Orascoptic in its original packaging
for environmentally sound recycling. Orascoptic will be glad to bear the cost of the return
shipping. Please contact your sales rep for details. The Waste Electrical and Electronic
Equipment (WEEE) Directive forbids the disposal of waste electrical and electronic equipment as
unsorted municipal waste and requires that they should be collected and recycled or disposed
of separately. Hazardous substances are present in electrical and electronic equipment and
present potential risks to human health and the environment if disposed of in municipal landfills
that are not designed to prevent migration of substances into the soil and groundwater. By
properly disposing of this waste, you will be contributing to the advancement of reuse, recycling
and other forms of recovery, as well as the prevention of pollution at a very local level.
8. Clean the Headlight
The headlight is manufactured using only high-quality components. This is an optical precision
instrument that must be cleaned and handled with the greatest care. Basic contaminations may
only be removed with a soft, clean, dry cloth in order to avoid scratching the lenses.
• Donotimmersetheheadlightinwater,sterilizationfluidorultrasoundcleaningsolutions.
The product is not waterproof.
• Onlyusedisinfectionclothsforseverecontamination.Disinfectionspraymustnotbeused
under any circumstances to avoid severely damaging the light.
• Onlycleantheheadlightwithadisinfectioncloth,suchasCaviWipes™.
• Donotusegasoline,cleaningsolutionsoraggressivesolventsforcleaning.
8

OPERATING INSTRUCTIONS
Discovery™ Portable LED Light System
9. Troubleshooting
Problem Solution
1. The operational unit is turned on, but
the headlight does not light up.
- Make sure that the headlight is properly
connected to the control unit.
- Charge the battery.
2. The headlight does not light up or no
longer lights up enough.
- The battery is too weak.
- Charge the battery.
3. Power to the charger is interrupted
before the end of the charge cycle
(such as a power outage).
Assoonaspowerhasbeenrestored,the
charge cycle will start again.
4. The charger display stays red (even
after 3 hours of charging) and does not
change to green.
Send the lighting system with the charger to
KerrCorporation/Orascopticforevaluation.
5. Battery capacity monitor is blinking.
- Battery capacity has been depleted.
- Charge the battery.
• Makeabsolutelysurethatyourdisinfectioncloth:
- issuitableforalcohol–sensitivesurfacesandformedicalfacilities,suchasadentist’s
chair.
- containsnotypeof1-propanol,Aldehyde,phenoloraquaternaryammoniumbond.
- has a broad-spectrum effect against bacteria, fungi and viruses.
• Sterilizationisnottobedonewithanautoclaveorthefollowingchemicals:glutaraldeydeor
agents containing iodide. To avoid damaging the headlight, do not use cleaning methods
other than those prescribed.
Do not pull on the cable during cleaning!
9

OPERATING INSTRUCTIONS
Discovery™ Portable LED Light System
10. Replacement Parts
AL-DISCOVERY-BAT Zeon Discovery battery pack
AL-DISCOVERY-CAB Zeon Discovery cable with headlight
AL-LCFZZ-DIS-1-AL Zeon Discoverycompletecuringlter
AL-DISCOVERY-CHG Zeon Discovery universal charger
11. Limited Manufacturer’s Warranty
ThislimitedmanufacturerwarrantyfromKerrCorporationappliesforallcountriestotheextent
thatnootherwarrantyexistsatthatlocation.Pursuanttothefollowingcontractualprovisions,
KerrCorporationguaranteesmaterial,constructionanddesigntobefreeofdeficienciesfrom
the time of first purchase.
1. This limited liability applies for the end purchaser of the product (Client). Legal claims by the
clientorclaimsbytheclientagainsttheseller/dealerofthedeviceareneitherexcludednor
limited.
2. The guarantee is for 12 months from the time of purchase by the original purchaser. In
the event of subsequent sale or other change of ownership, the warranty will run for the
remainder of the twelve month period. It remains otherwise unchanged.
3. Duringthewarrantyperiod,defectiveunits(accordingtounilateraldecisionbyKerr
Corporation),willberepairedorreplacedeitherbyKerrCorporationorbyauthorized
customer service. The client will receive either the repaired unit or a comparable
replacementunitfromKerrCorporation.Exchangedpartsoraccessorypartsbecomethe
propertyofKerrCorporation.
4. Thereisnoextendedorrenewedwarrantyperiodforrepairedorreplacedparts.
5. This limited warranty does not apply for painted or otherwise personalized parts.
6. Forexpendableparts(suchasLi-ionbatteries)thewarrantyisfor12monthsfromthetime
of sale.
10

OPERATING INSTRUCTIONS
Discovery™ Portable LED Light System
7. This limited warranty does not apply to abnormal signs of use. In addition, this limited
warranty does not apply if
a) The deficiency has been caused by misuse of the instructions for operation,
inappropriateuse,contactwithfluidsormoistureorextremeheatorclimatic
conditionsand/orshorttermvariationsinrelevantinfluencesortocorrosion,oxidation,
unauthorized intervention or attempts at connection, unauthorized opening or repair,
repair attempts with unacceptable replacement parts, abnormal installation, accidents,
forcesmajeures,spillageoffoodordrinks,chemicalinfluencesorotherinfluencesover
whichKerrCorporationhasnocontrol(includingdeficienciestooperationalpartssuch
as batteries that only have a limited lifespan, as well as damage to cables), unless the
deficiency is caused by a material, construction or fabrication error.
b) The client does not report the deficiency within 30 days after it was discovered within
theKerrCorporationwarrantyperiodortoanauthorizedcustomerserviceagent.
c) The serial number has been removed, scratched off, crossed out, changed or is
illegible.
d) The deficiency was caused by the fact that the device was used with a part not
approvedforusebyKerrCorporation,wasconnectedtosuchapartorwasotherwise
used inappropriately.
e) The deficiency was caused by the short circuit of the battery or the breakage of the seal
of the battery housing or manipulation of it or by the fact that the battery was used to an
inappropriate end.
8. ThislimitedwarrantyistheonlylegalremedyoftheclientagainstKerrCorporationas
wellasKerrCorporation’sonlyandexclusiveliabilitytotheclientfordeficienciesand
functional disruptions of the device. This limited warranty replaces all other warranties and
declarations of liability, whether in written or oral form, or other (not urgently enforceable)
legalprovisions,contractualprovisionsornon-allowednegotiations.KerrCorporationis
innowayliableforancillary,causalorcollateraldamage,costsorexpenses.Iftheclient
isalegalperson,KerrCorporationassumesnoliabilityforcollateraldamages,costsor
expenses.
9. For assertion of a warranty claim, the original purchase receipt with purchase date is to be
enclosed.
10.ChangestothislimitedwarrantyrequirethepreviouswrittenapprovalofKerrCorporation.
11

EuropeanUnionRepresentative
KerrItaliaS.r.l.ViaPassanti,332
I-84018Scafati(SA),Italy
KerrCorporation
3225DemingWay,Suite190•Middleton,WI53562USA
Phone:608-831-2555•Fax:608-828-5265
www.orascoptic.com
InCanada:Synca•800-667-9622
©2008KerrCorporation
Rev. B 12/08 P/N 960813
U.S.TechnicalSupport:800-369-3698
OutsidetheU.S.CallYourLocalDistributor
MadeinUSA
Other manuals for Zeon Discovery
1
Table of contents