Orlight Marine Grade ORLLM96 User manual

FROM SOURCE TO SITE
Installation instructions
ORLLM96 - Marine Grade LED Fixture
www.orlight.com | 01923 851 890
1
2
3
4
5
ON
OFF
110 240 V
7
6
ON
OFF
110 240 V
LN
-
+
350 mA
CONSTANT CURRENT
LED DRIVER
IN
IN
JB/S
OUT OUT
OUT OUT
OUT
OUT
JB/S
WIRING INSTRUCTIONS

www.orlight.com | 01923 851 890
V 1.01LM96
FROM SOURCE TO SITE
We recommend that this product is installed by a competent person in accordance with the latest edition of the
IET Wiring Regulations BS 7671 “Requirements for Electrical Installations” and the Buildings Regulations, as
may be applicable subject to the location and country of the job or installation.
For more information and installation guide lines please refer to “Guide on Lighting Risks and Regulations”
which can be downloaded from the website:
http://media.orlight.com/media/downloads/Orlight_guide_on_lighting_risks.pdf
NOTE – Light fi ttings in general can become hot whilst in operation. It is advisable that they do
not come into contact with any fl ammable materials such as fabrics, furniture, soft furnishings
or touched during/after operation.
* Please note, all information contained within this instruction manual is provided in good faith. We will not
be held responsible for any losses incurred as a result of any inaccuracies contained within this document.
3ON
OFF
110
240 V
1
2
ON
OFF SLAB
CONDUIT
INSTALLATION
SLEEVE
LED GROUNDLIGHT
110 240 V
CONCRETE
Cutout 85 mm
SLEEVE INSTALLATION INSTRUCTIONS