Orren Ellis CFL-1079 Product guide

Model No.: CFL-1079
Ceiling Fan with Light

Please contact us with following information:
1. Screen shot of your order page, including product picture, name and order
ID number.
2. Problem details with pictures / short video if possible.
Email: [email protected]
1

Packing List
NOTE:
1. Ceiling fan style may be different from the diagram.
2. Remote control requires AAA 1.5V battery x 2pcs (not included).
3. Mounting bracket, blade cover, LED panel and light shade may be
pre-assembled onto the fan housing in the package.
2
①Mounting Bracket 1 ⑤LED Panel 1
②Fan Housing 1 ⑥Light Shade 1
③Fan Blade 3 ⑦Remote Control 1
④Blade Cover 1 ⑧Hardware Bag 1 Set
Name QTY Name QTY
①
②
③
④
⑤
⑥
⑦
⑧

1. Be sure the power to the wires you are working on is disconnected, either the fuse
is removed or the circuit breaker is turned off. Turning the power off using the light
switch is not sufficient to prevent electrical shock.
2. A qualified licensed electrician is required for the installation.
3. The outlet box and support structure must be securely mounted and capable of reli-
ably /supporting a minimum of 50 pounds. Use only UL (cUL for Canadian Installation)
listed mounting boxes marked "FOR FAN SUPPORT".
4. The fan must be mounted with a minimum of 7 feet clearance from the trailing edge
of the blades to the floor.
5. Do not operate reversing switch while fan blades are in motion (if applicable). Fan
must be turned off and blades stopped before reversing blade direction.
6. Do not place any objects in the path of the blades.
7. To avoid personal injury or damage to the fan and other items, be cautious when
working around or cleaning the fan.
8. Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth
or lightly dampened soft cloth will be suitable for the cleaning.
9. After marking electrical connections, spliced conductors should be turned upward
and pushed carefully up into outlet box. The wires should be spread apart with the
grounded conductor on one side of the outlet box.
10. Electrical diagrams are reference only, different fan light may have different light
shade and bulbs.
Safety Rules
1. Installation Preparation
Tools You Need
If mounting to a support structure, you will also need the optional tools.
Ladder Pliers Screwdrivers
Wire
Strippers Power Drill
(optional) Drill Bit
(optional)
3

What to Expect with Your Installation
Must be able to
secure the fan
to building
structure or fan-
rated outlet box
30 inches
from blade
tip to nearest wall or
obstruction
You may need a
friend to help you.
Assess location
Angled Ceilings are
not supported.
7 feet from bottom
edge of blade to the
floor
Check box to see
fan weight
4
Angled Ceiling
not supported.
X
Step 1. Take out the fan housing and bracket assembly from the box.
Step 2. Remove the blade cover from the fan housing by loosing the screws on it.
Step 3. Secure the fan blades onto the fan housing with screws provided. Make
sure the beveled side facing the ground.
Step 4. Place the blade cover back to the fan housing with screws taken off.
NOTE:
Make sure to assemble the blades in sequence and fasten the screws with
equal force.
2. Assembling the Fan Blades
Fan Housing
Blade Cover
Fan Blade

NOTE: THIS FAN ONLY NEEDS ONE SET
OF INPUT WIRES (black, white and ground
wire). Both of the fan and lights will be
controlled by the remote controller. The wall
switch is not able to control the fixture full func-
tionally.
THIS FAN CAN ONLY BE CONNECTED
ONTO ON/OFF SWITCH IF YOU HAVE ONE,
NOT SUITABLE FOR DIMMAER SWITCH.
Step 1. Install the Bracket
Take out the mounting bracket from the motor
housing by loosing the screws on the side. Se-
cure the bracket to the ceiling outlet box with
the screws and washers provided with your
outlet box (Fig. 1).
Step 2. Connect the Wires
Connect the black wire from the remote
receiver to your house live wire, white wire to
your neutral wire, bare copper/ green/ yellow
and green wire to your ground wire. Spread
the wires apart so that the live wires are on
one side of the outlet box and the neutral wires
are on the other side (Fig. 2).
Step 3. Attach the Ceiling Fan
Attach the ceiling fan to the mounting bracket
on the side of motor housing with screws pro-
vided (Fig. 3).
Step 4. Connect the LED Panel
Connect the wires from LED panel to the fan
housing with wire connectors. Attach the light
shade onto the blade cover by rotating clock-
wise (Fig. 4).
the bolt
(Fig. 6).
Step 5. Fix the downrod with set screws provided.
3. Hanging the Fan
Place the downrod ball into the bracket socket
(Fig. 7). Be sure the fixation slot is locked by the
bracket.
3. Installing the Fan
5
Fig. 1
Fig. 2
Fig. 3
Fig. 4

Remote Control Instructions
NOTE:
Please insert 2 batteries before using.
AAA 1.5V battery x 2pcs (not included)
①: Turn off the fan and lights.
②⑦: "F" refers forward fan direction."R" refers reverse the fan.
③④⑨⑩⑫⑬: 1/2/3/4/5/6 for fan speeds.
⑤⑭⑮: 1H/2H/4H for timing the fan.
⑥: Turn on/off the lights.
⑧: Natural wind of the fan, fan speed will change automatically when use this
function.
⑪: Turn off the fan.
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
⑭
⑮
6

Trouble Shooting
1. Fan doesn't work
• Make sure the fixture is connected to an ON/OFF wall switch, not dimmer switch.
• Check the remote control battery (not included in this package).
• Check the circuit breaker to ensure the power is on.
• Turn off power from the circuit breaker, then loosen the canopy and check all the
connections according to the wiring diagram.
2. Lights Do Not Light Up / Flicker / Noisy Operation
• Make sure the fixture is connected to an ON/OFF wall switch, not dimmer switch.
• Check your power and switch to make sure it's power on.
3. Noisy Operation
• Re-tighten all screws on bracket.
• Check to see if any of the blades are cracked. If so, replace the blades.
4. Remote does not work
• Make sure the battery is installed correctly.
• Pair the remote control again (See page 6).
• Install 2 new batteries.
Clean And Care
To clean, wipe the fixture with soft cloth. Spray from chemical cleaners can dis-
color the finish of the fixture. Do not use scouring pads, powders, steel wool or
abrasive paper to clean this fixture.
Ordering Parts
Keep this manual for future reference, and in case replacement parts are needed.
Available parts can be ordered from place of purchase. Use exact wording from
diagrams when ordering parts.
7