ORVIBO WiWo-R1 User manual

AllOne remote control
Model: WiWo-R1
WWW.ORVIBO.COM

INTRODUCTION
Feature
Support WiFi network.
Support Smart configure net technology, easy to access
settings.
Home appliances status timely feedback to APP.
Support Max 15 IR home appliances.
Support Max 20 devices to control WiFi remote control
Support automatic configuration with IR remote control
Support scene setting
East installation, put on the table, paste on the wall, fix on the
ceiling
Support working with RF switch to control lighting
Data
Power supply DC 5V 600mA
Max current 10A
IR 38KHz
FR 433MHz ASK
Material High transmittance PC+stainless steel
Wireless standard Wi-Fi 2.4GHz b/g/n
Wireless frequency 2.412-2.484GHz
Security type WEP/TKIP/AES

Caution
1. Keep it in dry and it is not allowed to be used in bathroom.
2. Rated power is 2000W, some of home appliance when it is
starting the peak power could be over 2000W, so please use
safely.
USER GUIDE
Download App
Option 1 : Scan the 2D bar code from our package, then you can
download to your smart phone.(see picture1)
(picture1)
Option 2: you can go to Apple store or Android market searching
WiWo2 and download it for free.(see picture2)
Security mechanism WEP/WPA-PSK/WPA2-PSK
Wireless consumption ≦0.3W
Working temperature ·-20~60℃
Working humidity ≤80%

（picture2）
Smart Link configuration
Connect AllOne to the power, LED backlight slow blinking with
red(5times/s), AllOne in configuring mode.
Configuration
Go to APP configuration page
Enter wifi password which the AllOne
is connected with, setup new remote
control

After configuration is successful
you will see device list and you can
try to control the light, AC, TV, STB
in the APP. Press “+” for adding.
Go to Add page, create new
device.

Device management
IR learning
Press device button in APP
constantly, you can rename,
lock/unlock, setting password, delete
device.
Press the button constantly and
use a real remote control sent IR
light to AllOne.

Automatic matching
Remark: It is unnecessary to connect with internet for
Automatic matching
Orvibo RF switch configuration
RF switch learning: Press touch key until you can hear“Di”then
release your finger.
Touch key
You can select any one of AC
brand and try to control your
device(suggestion: first Brand
is mostly match)
If it is successful you can
control your device without
learning every button, it is a fast
solution.

Remark:
1. If you have tried to control switch from APP for 3 times and it
is failure please try to operate switch again.
2.you only need to learn one touch key, other keys will
automatically match
Select a light button in your
APP, you can try to control
the light if it works RF switch
is configurated successfully.

Scene
Reset button
1. Reset to defaults: Connecting AllOne to power, press reset
button constantly until it is in fast blinking with red light(5times/s).
2.AP configure: Connecting AllOne to power, press reset button
constantly until it is fast blinking with blue light(5times/s).
Reset
base
Go to Scene and you can add
several devices and scene.

Backlight indicator
backlight status
Fast blinking in red light.
(5times/s)
Smart link configuration
Constantly on in red IR learning
Fast blinking in blue light.
(5times/s)
AP configuration
Constantly on in blue try to connecting to WiFi router
Slowly blinking in rblue connected to WiFi and cloud
Slowly blinking in purple connected to WiFi but
disconnected to cloud
Remark:
AllOne will go to sleeping mode after 1munites
installation
Put it on the desk
Paste on the wall

Fix on the ceiling
PACKAGE
Allone wifi remote control: 1PCS
5V 600mAh adapter: 1PCS (Option: BS, SAA, UL, EU plug)
Micro USB wire: 1PCS
screw and rubber plug: 1PCS
Allone user manual：1PCS