Outcome Health EXAM ROOM TABLET User manual

EXAM ROOM TABLET
INSTRUCTION MANUAL
All manuals and user guides at all-guides.com
all-guides.com

All manuals and user guides at all-guides.com

3
CHECKLIST
Exam Room Tablet x1
Accessory Box x1
Exam Room Tablet Box
3 Outlet Adapter x1 Tablet Power Cable x1 Outlet Lock x1
Tool Bag x1 x1x4
x1
Screw
Driver M4x6
Allen
Wrench
All manuals and user guides at all-guides.com

5
CHECKLIST
Tablet Stand Box
For
wall mount
1
1
x
x
1x
4x
M8x12
M5x30 M7x35
M4x10 M5 M2.5
4x
x x x x1 1 1 1
All manuals and user guides at all-guides.com

67
1.
Contact the ofce manager to verify the best placement
for either wall mount or stand installation of the Exam
Room Tablet.
It should always be in an exam room,
close to a power outlet,
and be easily accessible by patients.
Page 9 - 17
Stand
Page 18 - 24
Wall Mount
All manuals and user guides at all-guides.com

8
Please note, there are two types of
stands. The following instructions
work for both.
For
Stand
2.
Assemble stand or install the wall mount.
or
All manuals and user guides at all-guides.com
all-guides.com

10 11
a.
Feed the power cable through the stand.
b.
Using the provided tools, attach the base to the stand arm.
All manuals and user guides at all-guides.com

12 13
c.
Place allen wrenches in the bottom pole
on magnet for storage.
d.
Unscrew the back of the tablet port cover.
Screw
Driver
All manuals and user guides at all-guides.com

14 15
f.
Reattach the cover.
e.
Connect the power cable.
All manuals and user guides at all-guides.com

16 17
g.
Use four screws that come with the tablet
to attach it to the stand.
h.
Adjust the power cable for tension.
x 4
Allen
Wrench Screws
M4x6
All manuals and user guides at all-guides.com

18 19
For
Wall Mount
a.
Remove the VESA plate from the stand.
All manuals and user guides at all-guides.com
all-guides.com

20 21
b.
Verify the type of mounting surface and follow the
instructions.
impact
drill
cinder block
solid concrete
1/4 inch
Depth of 1.5 inches
CONCRETE/
CINDER BLOCK WALL
Masonry bit
1
3
.
2
E
E
wall plate
drywall
concrete
concrete
surface
Drill holes and insert anchors.
Place wall plate of swivel over anchors
and secure with bolts.
Tighten all fasteners.
All manuals and user guides at all-guides.com

22 23
STUD FINDER
5/32 inch
wood/steel bit
Depth of 1 inch
DRYWALL WITH
WOOD STUDS
(Recommended)
All manuals and user guides at all-guides.com

24 25
3.
Tape the faceplate to the wall, then
remove the screw on the faceplate.
c.
Attatch the tablet to the VESA plate.
x 4
Allen
Wrench Screws
M4x6
*Do not use doct tape.
All manuals and user guides at all-guides.com

26 27
4.
Put Outlet Lock on the plug.
5.
Plug the power cable.
Use the top outlet for the Tablet Outlet Lock.
All manuals and user guides at all-guides.com

28 29
If all the outlets are occupied ...
?
Then use 3 Outlet Adapter (provided) to connect
the additional exam room equipment.
6.
Secure Outlet Lock and faceplate
with included screw, then remove tape.
Step 1 Step 2
All manuals and user guides at all-guides.com
all-guides.com

30 31
7.
Power up the Exam Room Tablet
8.
Tap “Begin”.
All manuals and user guides at all-guides.com

32 33
9.
ALWAYS select Exam Room Tablet icon and tap Next.
10.
Tap “Network Settings”.
1
2
All manuals and user guides at all-guides.com

34 35
11.
Connect to SSID (network name) based on
the instructions in your Ocome Health scope of work.
12.
Once WiFi is connected, tap the “Back” button.
All manuals and user guides at all-guides.com

36 37
13.
On the Network Setup Screen,
tap “Test” to test the network connection and
then select “Next” to continue.
If it fails, please see the trouble shooting guide.
14.
Tap “Next” when software update check is complete.
2
1
All manuals and user guides at all-guides.com