Outcome Health EXAM ROOM TABLET User manual

EXAM ROOM TABLET
INSTRUCTION MANUAL

3
CHECKLIST
Exam Room Tablet x1
Accessory Box x1
Exam Room Tablet Box
3 Outlet Adapter x1 Tablet Power Cable x1 Outlet Lock x1
Tool Bag x1 x1x4
x1
Screw
Driver M4x6
Allen
Wrench

5
CHECKLIST
Tablet Stand Box
For
wall mount
1
1
x
x
1x
4x
M8x12
M5x30 M7x35
M4x10 M5 M2.5
4x
x x x x1 1 1 1

67
1.
Contact the ofce manager to verify the best placement
for either wall mount or stand installation of the Exam
Room Tablet.
It should always be in an exam room,
close to a power outlet,
and be easily accessible by patients.
Page 9 - 17
Stand
Page 18 - 24
Wall Mount

8
Please note, there are two types of
stands. The following instructions
work for both.
For
Stand
2.
Assemble stand or install the wall mount.
or

10 11
a.
Feed the power cable through the stand.
b.
Using the provided tools, attach the base to the stand arm.

12 13
c.
Place allen wrenches in the bottom pole
on magnet for storage.
d.
Unscrew the back of the tablet port cover.
Screw
Driver

14 15
f.
Reattach the cover.
e.
Connect the power cable.

16 17
g.
Use four screws that come with the tablet
to attach it to the stand.
h.
Adjust the power cable for tension.
x 4
Allen
Wrench Screws
M4x6

18 19
For
Wall Mount
a.
Remove the VESA plate from the stand.

20 21
b.
Verify the type of mounting surface and follow the
instructions.
impact
drill
cinder block
solid concrete
1/4 inch
Depth of 1.5 inches
CONCRETE/
CINDER BLOCK WALL
Masonry bit
1
3
.
2
E
E
wall plate
drywall
concrete
concrete
surface
Drill holes and insert anchors.
Place wall plate of swivel over anchors
and secure with bolts.
Tighten all fasteners.

22 23
STUD FINDER
5/32 inch
wood/steel bit
Depth of 1 inch
DRYWALL WITH
WOOD STUDS
(Recommended)

24 25
3.
Tape the faceplate to the wall, then
remove the screw on the faceplate.
c.
Attatch the tablet to the VESA plate.
x 4
Allen
Wrench Screws
M4x6
*Do not use doct tape.

26 27
4.
Put Outlet Lock on the plug.
5.
Plug the power cable.
Use the top outlet for the Tablet Outlet Lock.

28 29
If all the outlets are occupied ...
?
Then use 3 Outlet Adapter (provided) to connect
the additional exam room equipment.
6.
Secure Outlet Lock and faceplate
with included screw, then remove tape.
Step 1 Step 2

30 31
7.
Power up the Exam Room Tablet
8.
Tap “Begin”.

32 33
9.
ALWAYS select Exam Room Tablet icon and tap Next.
10.
Tap “Network Settings”.
1
2

34 35
11.
Connect to SSID (network name) based on
the instructions in your Ocome Health scope of work.
12.
Once WiFi is connected, tap the “Back” button.

36 37
13.
On the Network Setup Screen,
tap “Test” to test the network connection and
then select “Next” to continue.
If it fails, please see the trouble shooting guide.
14.
Tap “Next” when software update check is complete.
2
1