OWT OZCO Project #XXX User manual

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/11/2017 . This information is updated periodically
and should not be relied upon after 2 years from 5/11/2017 . Please visit OZCOBP.com to get current information.
OZCO Project #XXX - Picnic Table
OZCO Project #XXX - Picnic Table 1

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/11/2017 . This information is updated periodically
and should not be relied upon after 2 years from 5/11/2017 . Please visit OZCOBP.com to get current information.
3"
6'0"
Picnic Table
3
OZCO Project #XXX - Picnic Table
4' 1
2"
4"
5'0"
4"
1/2"x45
6'1 1
2" 3'4"
2'9 15
16 "
2'8"

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/11/2017 . This information is updated periodically
and should not be relied upon after 2 years from 5/11/2017 . Please visit OZCOBP.com to get current information.
Bill of Materials
4
OZCO Project #XXX - Picnic Table
7
10
2435
9
1
6
11
ITEM
NO. QTY. PART NUMBER DESCRIPTION
1 4 51774 4" 90 Flush Outside
(FO-90-IW-4)
2 1 51768 4" Flush Inside 45
(FI45-IW-4)
0.08 56627 OWT Timber
Screw 3-3/4"
3 1.6 56621 1.5" Hex Cap Nut
(HCN)
0.04 56627 OWT Timber
Screw 3-3/4"
4 2 51717 2" Standard Rafter Clip
(RC-IW-2)
5 4 4x4 Post 4x4x2'0"
6 4 4x4 Post 4x4x1'10"
75 2x8
Board 2x8x6'0"
82 2x6
Board 2x6x3'2 1/2"
9 1 4x4 Post 4x4x5'0"
10 2 1x4
Board 1x4x6'0"
11 2 1x4
Board 1x4x3'4"
4

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/11/2017 . This information is updated periodically
and should not be relied upon after 2 years from 5/11/2017 . Please visit OZCOBP.com to get current information.
Purchase List
5
OZCO Project #XXX - Picnic Table
QTY. PART
NUMBER DESCRIPTION
4 51774 4" 90 Flush Outside
(
FO-90-IW-4
)
1 51768 4" Flush Inside 45
(
FI45-IW-4
)
1 56627 OWT Timber
Screw 3-3/4"
2 56621 1.5" Hex Cap Nut
(
HCN
)
2 51717 2" Standard Rafter Clip
(
RC-IW-2
)
3 4x4x8L 4x4x8
2 2x8x12L 2x8x12
1 2x8x8L 2x8x8
1 2x6x8L 2x6x8
1 1x4x12L 1x4x12
1 1x4x8L 1x4x8
1box #9x3"DeckScrew
1 box finishing nails

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/11/2017 . This information is updated periodically
and should not be relied upon after 2 years from 5/11/2017 . Please visit OZCOBP.com to get current information. 6
OZCO Project #XXX - Picnic Table
51774 56621
follow QR barcode with your smart phone or visit
OZCOBP.com for product installation instructions
56627
51717
51768

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/11/2017 . This information is updated periodically
and should not be relied upon after 2 years from 5/11/2017 . Please visit OZCOBP.com to get current information.
2'0"
45° both
ends
cut from 4x4x8L board
2'0"
1'10"
cut from 4x4x8L board
1'10"
cut from 2x8x8L board
6'0"
Cutlist 7
OZCO Project #XXX - Picnic Table
2'0"
2'0"
cut from 4x4x8L board
5'0"
1
2" X 45° both ends
cut from 2x8x12L board qty: 2
6'0"
1'10"
1'10"
45°
6'0"

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/11/2017 . This information is updated periodically
and should not be relied upon after 2 years from 5/11/2017 . Please visit OZCOBP.com to get current information.
Cutlist 8
OZCO Project #XXX - Picnic Table
cut from 1x4x8L board
3'4"
cut from 2x6x8L board
3'2 1
2"
cut from 1x4x10L board
6'0"
3'4"
6'0"
3'2 1
2"

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/11/2017 . This information is updated periodically
and should not be relied upon after 2 years from 5/11/2017 . Please visit OZCOBP.com to get current information.
Suggested Tools
(others may be required) 16
OZCO Project #XXX - Picnic Table

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/11/2017 . This information is updated periodically
and should not be relied upon after 2 years from 5/11/2017 . Please visit OZCOBP.com to get current information.
2'0"
=
=
=
=
step 1
10
OZCO Project #XXX - Picnic Table
Tool Required
3/8" Driver
Cap (finger tight)
OWT Timber Screw

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/11/2017 . This information is updated periodically
and should not be relied upon after 2 years from 5/11/2017 . Please visit OZCOBP.com to get current information.
1'7 15
16 "
2'6 1
2"
7"
utilize 56627
screw for Hex
Cap Nut
installation
Tool Required
3/8" Driver
Cap (finger tight)
OWT Timber Screw
step 2
11
OZCO Project #XXX - Picnic Table

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/11/2017 . This information is updated periodically
and should not be relied upon after 2 years from 5/11/2017 . Please visit OZCOBP.com to get current information.
Tool Required
3/8" Driver
Cap (finger tight)
OWT Timber Screw
step 3
12
OZCO Project #XXX - Picnic Table
repeat steps 1-2 to
build opposite side

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/11/2017 . This information is updated periodically
and should not be relied upon after 2 years from 5/11/2017 . Please visit OZCOBP.com to get current information.
secure table top with #9 x 3"
deck screw; not shown
shown with optional 3" umbrella mounting hole
C
L
4' 1
2"
= =
step 4
13
OZCO Project #XXX - Picnic Table

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/11/2017 . This information is updated periodically
and should not be relied upon after 2 years from 5/11/2017 . Please visit OZCOBP.com to get current information.
step 2
using 3" hole
saw, drill until drill
bit breaks thru
other side
drill bit break thru
C
L
C
L
Hole Saw cut in 4x4
15
OZCO Project #XXX - Picnic Table
step 1
file flat spot
large enough
for drill bit to
start
Perform this step if an umbrella is used for table
step 3
finish hole
from
opposite
side

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/11/2017 . This information is updated periodically
and should not be relied upon after 2 years from 5/11/2017 . Please visit OZCOBP.com to get current information.
Tool Required
3/8" Driver
Cap (finger tight)
OWT Timber Screw
step 5
14
OZCO Project #XXX - Picnic Table
shown with optional 3" umbrella mounting hole
= =

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/11/2017 . This information is updated periodically
and should not be relied upon after 2 years from 5/11/2017 . Please visit OZCOBP.com to get current information.
step 6
16
OZCO Project #XXX - Picnic Table
secure table top trim with
finishing nails; not shown