
Manual Version: v1.0
Model Code: 3488
Oypla.com LLP / www.oypla.com
2Operating
Instructions
-
2 Technical
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
Leaving the product outside
exposed to weather, especially
direct sun, rain and salt air, will
speed the weathering process.
This can be slowed by removing
the product from these
conditions, or covering it with a
suitable cover.
This product is not a toy, and is
only to be used for its designated
purpose.
This product is intended for both
indoor and outdoor use.
Do not carry out alterations or
modifications to this product.
Clean only with a damp cloth. Do
not use strong industrial cleaning
substances. Never clean while hot
or in use.
If the product is damaged or has
any defects, please contact
Operating Instructions
Please refer to the diagram below for instructions on how to operate your product.
1. Obtain the standard atmospheric pressure from your local observatory
or other ways.
2. Adjust the spiral on the back of the barometer with adjusting tool, and
then make it point to the air pressure you obtained.
1. This thermometer and hygrometer are already accurate therefore, users
do not need to adjust again.
2. Please hang the weather station in an adequately ventilated place,
avoiding sunshine and corrosive air.
3. Use it in the required range, and ensure it does not touch water or steam.
4. Avoid violent vibration and hitting, do not dismount by yourself.