Oypla Leisure 3996 User manual

User Manual
USER MANUAL Model No: 3996 & 3997
90cm & 120cm Bubble LED Lights

•This product is not a toy, and is only to be used for its designated purpose.
•Never carry out any alterations or modifications to this product.
•Do not attempt to fill beyond the ‘MAX’ line, only fill with the designated amount
(90cm or 120cm of water).
•Do not pull the bubble adjustment screw as this will cause water to leak, creating
a safety hazard.
•This product is intended for indoor use only.
•Children should be supervised at all times around this product.
•To protect against electrical shock, do not immerse the cord or plug in water or
any other liquid.
•Ensure the power supply to the socket into which the appliance is plugged, is in
accordance with the rating label on the appliance and that the socket is earthed.
•Clean only with a damp cloth. Do not use strong industrial cleaning substances or
abrasive materials as these will damage the product.
•Unpacking, installing and fixing the parts are to be completed by an adult.
•If the product is damaged or has any defects, please contact cs[email protected]
KEEP PRODUCT AWAY FROM SOCKETS WHEN IN USE
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold on
this condition, which no representative of the company can waive or change.
USER MANUAL Model No: 3996 & 3997

Operating Instructions
USER MANUAL Model No: 3965USER MANUAL Model No: 3996 & 3997
Parts List:
If you are missing any of the below parts please contact [email protected]
The carton should contain:
•1x LED Bubble Light Tower
•1x Assortment of nine coloured fish
•1x Power cord and plug
How to use the 90cm or 120cm Bubble LED Lights
1. Place the empty LED bubble light tower into an empty space, making sure that electrical appliances
and plug sockets aren’t in the tower’s immediate radius.
2. Take the power cord and insert it into the power component found in the base of the tower (on the
opposite side to the bubble adjustment screw. Do not put the plug into a socket at this stage.
3. Remove the lid from the LED bubble light tower and begin to pour water in. Be sure to not exceed the
maximum fill limit as this will cause the tower to spill when the bubbles are activated.
4. Once you have filled the LED bubble light tower, you can drop the assortment of coloured fish into
the tower. After this, place the lid back onto the tower.
5. Put the plug into an available plug socket, making sure that the plug socket is a reasonable distance
from the LED bubble light tower to avoid spillages and potential health and safety hazards.
6. Once the LED bubble light tower is on, turn the bubble adjustment screw to set the rate of which the
bubbles come out. Turn right to heighten the amount of bubbles and turn left to lower the amount
of bubbles. Do not pull on the bubble adjustment screw as this will cause it to come out and for water
to spill, creating a health and safety hazard.

USER MANUAL Model No: 3996 & 3997
Imported into the EU by Oypla.com LLP, Uxbridge, UB8 2FX
Environmental Protection
Products bearing the symbol shown above means that used electrical and electronic equipment (WEEE) should not be mixed with general
household waste. For proper treatment, recovery and recycling, please take this product(s) to designated collection points where it will be
accepted free of charge. Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on
human health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for
further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with
your national legislation.
Please retain a copy of all instructions for future
consultation.