Panasonic CQ-C1120AN User manual

Cautions
This product is a class Ilaser product.
●A laser beam leak results in hazardous radiation exposure.
●Do not open covers and do not repair it by yourself. Refer servicing to qualified per-
sonnel.
●Wave length : 780 nm
●Laser power : No hazardous radiation is emitted with safety protection.
Precautions
■Volume Level
For your driving safety, keep the volume level low enough to be aware of road and
traffic conditions.
■Car Washing
To avoid electrical shorts which may cause fire, or other damage, do not expose
this product (including the speakers and CDs) to water or excessive moisture.
■Car Ventilation
If your car is parked for several hours in direct sunlight, the temperature inside the
car may become very high. It is advisable to drive the car and give the interior a
chance to cool down before switching the unit on.
■Power Supply
This product is designed to be used in a car having a 12-Volt negative ground bat-
tery system.
■Disc Mechanism
Do not insert coins or any small objects. Keep screwdrivers and other metallic
objects away from the disc mechanism and disc.
■Service
This product is made of precision parts. Do not attempt to disassemble or adjust
any parts. For repair, please consult your nearest authorized Panasonic Service
Centre.
Note: The preset memory is cleared to return to the original factory setting when the
power connector or battery is disconnected.
Accessories
Something wrong....?! (Ex. smoke, smell and no sound Bpossibility of fire or shorting.)
q Turn off the power.
w Detach the power cord and bring the unit to your dealer.
Product service, repair and enquiry
8Consult your nearest Panasonic Service Centre.
Trouble Check point
●Adjust the balance and fader.
●Verify the wiring.
●Connect the speaker cord correctly.
3 Sound quality
Left and right
sounds are
reversed
No sound from
left, right, front,
or rear speaker
3 Error indication
●CD dirtied
●CD upside
down
●CD scratched
●No operation
by some
cause.
●Eject the CD.
●Consult your nearest
Panasonic Service
Centre.
Message Cause Remedy
Troubleshooting
3 General
No sound
Noise
●Tune in to another high-intensity station.
●Make sure that the antenna mounted point
is grounded properly.
3 Radio
Frequent
noise
●Not compatible with MP3/WMA.
●Clean the CD.
3 CD Player
Time is counted
but no sound
comes out.
Sound skip,
poor sound
quality
●The maximum permissible tilt is 30°.
●Secure the unit.
Sound skip
due to vibra-
tion
●Never try repair by yourself.
No power
●Start the engine. (Or turn the ignition
switch to the ACC position.)
●Verify the wiring. (Ex. Battery cord, ACC
cord, grounding cord, etc.)
●Fuse blown (Contact the nearest
Panasonic Service Centre.)
●Ask a professional for fuse replacement.
●Be sure to use the same rated fuse.
●Disable the mute function.
●Verify the wiring.
●Wait until the dew disappears before
turning on the unit.
●Make sure that the ground lead is ground-
ed properly.
● The preset memory is cleared to return to
the original factory setting when the power
connector or battery is disconnected.
Preset data
deleted
No sound, or
disc is automati-
cally ejected
●Load the CD correctly.
●Clean the CD.
Trouble Check point
3 CD Player (CONTINUED)
CD not
ejectable
●Press [u]. If the CD is not ejected, con-
tact the nearest Panasonic Service
Centre.
CD Player/Receiver
CQ-C1120AN/C1120GN
C1110AN/C1110GN/C1100VN
Operating Instructions
8This operating instruction manual applies to the 5 models below.
The difference among these models are mentioned below.
8All illustrations represent model CQ-C1120AN unless otherwise specified.
Models Face Color
CQ-C1120AN Plating Silver
CQ-C1120GN Plating Silver
CQ-C1110AN Plating Black
CQ-C1110GN Plating Black
CQ-C1100VN Coating Black
Face Illumination Color
Amber
Green
Amber
Green
Blue
Button Illumination Color
Amber
Green
Amber
Green
Red
English
CQ-C1120AN
SQ
Note: An alarm is generated to remind you of the face plate when turning off the
power.
0AN
■Install the face plate
1
2
Release the face plate. BAND
DISP
]TUNE[
qSlide the left side.
wPress the right side until a “click” is heard.
Take the face plate with you when leaving the car.
Theft Prevention
■Remove the face plate
qPull the right side.
wSlide the left side.
Detach the face plate.
Put the face plate into the case.
●Only when “NO CT” appears in the step wbelow, set the clock.
Clock Setting
Notes on discs
●This unit does not support 8 cm discs.
●Do not touch the recorded surface.
●Avoid leaving CDs in places with direct sunlight, dust and
moisture such as seat and dashboard.
●Do not use irregular shaped discs.
●You may have trouble playing discs in the following cases.
●Dirt, fingerprints, scratches on the disc surface
●If a disc is damaged from leaving inside a car for extend-
ed periods, etc.
●Inappropriate writing software is used.
●Contains other than CD-DA data.
Notes on
CD-R/RW
●Not compatible with MP3/WMA.
●You may have trouble playing back some CD-R/RW discs
recorded on CD recorders (CD-R/RW drives), either due to
their recording characteristics or dirt, fingerprints, scratch-
es, etc. on the disc surface.
●CD-R/RW discs are less resistant to high temperatures and
high humidity than ordinary music CDs. Leaving them
inside a car for extended periods may damage and make
playback impossible.
●Some CD-R/RWs can not be played back successfully
thanks to incompatibility among writing software, a CD
recorder (CD-R/RW drive) and the discs.
●This player cannot play the CD-R/RW discs if the session is
not closed.
●This player cannot play the CD-R/RW discs which contains
other than CD-DA.
●Be sure to observe the instructions of CD-R/RW disc for
handling it.
Maintenance
●Wipe the unit with a soft dry cloth.
●Never apply volatile liquids such as benzine and thinner to
prevent damage.
Fuse
●Use fuses of the same specified rating (15A).
●Using different substitutes or fuses with higher ratings, or
connecting the unit directly without a fuse, could cause fire
or damage to the unit.
●If the fuse replacement fails, contact your nearest
authorized Panasonic Service Centre.
1
2
Thank you very much for purchasing a Panasonic CD Player/Receiver.
Fantastic
Sound Space!
XXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
OO-OOOOO
q
Operating
Instructions
English
(YEFM284127)
Deutsch
(YEFM284128)
Français
(YEFM284129)
Nederlands
(YEFM284130)
Svenska
(YEFM284131)
Italiano
(YEFM284132)
Español
(YEFM284133)
Polski
(YEFM284134)
Q'ty: 1 set
w
Installation
Instructions
English
Deutsch
Français
Nederlands
(YEFM293095)
Svenska
Italiano
Español
Polski
(YEFM293096)
Q'ty: 1 set
e
Warranty Card
Q'ty: 1
r
Removable
Face
Plate Case
(YEFA131646)
Q'ty: 1
t
Mounting
Collar
(YEFX0215873)
Q'ty: 1
y
Power
Connector
(YEAJ02874)
Q'ty: 1
i
Trim Plate
C1100VNL
(YEFC05613)
Others
(YEFC05609)
Q'ty: 1
Press [BAND] to select the
radio AM (MW/LW) mode.
(aRefer to “Radio”)
Press [DISP].
Hold down [DISP] for 2 sec-
onds or more.
Press []TUNE[].
Press [DISP].
Press []TUNE[].
Press [DISP].
(AM mode)
(NO CT)
(Blink: Hours)
Adjust hours
(Blink: Minutes)
Adjust minutes
(Completed)
■General
Power Supply : 12 V DC(11 V - 16 V), Test
Voltage 14.4 V, Negative
Ground
Tone Controls (Bass) : ±12 dB at 100 Hz
Tone Controls (Treble) : ±12 dB at 10 kHz
Current Consumption : Less than 2.5 A (CD mode, 0.5
W 4-Speaker)
Maximum Power Output : 45 W x 4 (at 4 Ω)
Power Output : 20 W x 4 (DIN45 324, at 4 Ω)
Speaker Impedance : 4 - 8 Ω
Pre-Amp Output Voltage : 2.5 V (CD mode)
Pre-Amp Output Impedance : 200 Ω
Dimensions (Main Unit) : 178(W) x 50(H) x 155(D) mm
Weight (Main Unit) : 1.4 kg
■CD Player
Sampling Frequency : 8 times oversampling
Pick-Up Type : Astigma 3-beam
Light Source : Semiconductor laser
Wavelength : 780 nm
Frequency Response : 20 Hz - 20 kHz (1 dB)
Signal to Noise Ratio : 96 dB
Total Harmonic Distortion : 0.01 % (1 kHz)
Wow and Flutter : Below measurable limits
Channel Separation : 75 dB
■Radio
FM
Frequency Range : 87.5 - 108 MHz
Usable Sensitivity : 6 dB/µV(S/N 30 dB)
Stereo Separation : 35 dB (at 1 kHz)
MW
Frequency Range : 531 - 1 602 kHz
Usable Sensitivity : 28 dB/µV (S/N 20 dB)
LW
Frequency Range : 153 - 279 kHz
Usable Sensitivity : 32 dB/µV (S/N 20 dB)
Specifications
Stereo/Mono Power Amplifier:
CY-M7052EN/CY-M9054EN
(For Upgrade)
CQ-C1120AN/C1120GN/
C1110AN/C1110GN/
C1100VN
Sophisticated Product Achieived by Optional Functions
●Sound System with Spurting Realism
(2-channel or 4-channel Power Amplifier)
●Powerful Heavy Bass
(Stereo/Mono Power Amplifier) : CY-M7052EN/CY-M9054EN
Subwoofer (For Upgrade)
YEFM284127 ND1203-1014 Printed in China
Matsushita Electric Industrial Co., Ltd.
Web Site : http://www.panasonic.co.jp/global/
Trim Plate Color
Dark Silver
Dark Silver
Dark Silver
Dark Silver
Coating Black
■CD-R/CD-RW playable
■New simple-setting tone control "SQ" (Sound Quality)
■2.5 V preamplifier outputs
■18 FM and 6 AM presets with preset scan
■Anti-theft system provided by the removable faceplate
ISO Antenna
Adapter
u
Lock Cancel
Plate
Mounting Bolt
Notes:
●The number in parenthesis underneath each accessory part name is the part number for
maintenance and service.
●Accessories and their parts numbers are subject to modification without prior notice due
to improvements.
●Mounting Collar tand Trim Plate iare mounted on the main unit at shipment.
(YEP0FZ3264)
Q'ty: 1 set
Note: Specifications and design are subject to modifica-
tion without notice due to improvements.
Customer Care Centre
¡For UK customers: 08705 357357
¡For Republic of Ireland customers: 01 289 8333
¡Visit our website for product information
¡E-mail: [email protected]
Direct Sales at Panasonic UK
¡Order accessory and consumable items for your product
with ease and confidence by phoning our Customer Care
Centre Monday - Friday 9:00am - 5:30pm. (Excluding
public holidays).
¡Or go on line through our Internet Accessory ordering
application at www.panasonic.co.uk.
¡Most major credit and debit cards accepted.
¡All enquiries transactions and distribution facilities are
provided directly by Panasonic UK Ltd.
¡It couldn't be simpler!
¡Also available through our Internet is direct shopping for
a wide range of finished products, take a browse on our
website for further details.
Sales and Support Information

CQ-C1120AN
SQ
How to Enjoy Music
Power on
PTY (Programme Type)/
MONO/LOC(Local)
AF (Alternative Frequency)/
REG (Region)
DISP (Display)/CT (Clock Time)
SRC (Source)/
POWER
MUTE/SQ (Sound Quality)
CD Slot Eject
]TUNE[
6TRACK 7
Fast Forward/Fast Reverse
TA (Traffic Announcement)
VOLUME/SEL (Select)
●Press to power on.
●Press again and hold to power off.
1 to 6 (Preset Memory)
BAND/APM (Auto Preset Memory)/
y/5(Pause)
Turn to change each level
Turn to adjust
■Sound Control ■Sound Quality (SQ)
SQ is a function that can call up various sound types at the
touch of button in accordance with your listening music type.
Press and hold [MUTE] (SQ) for more than 2 seconds to select
the sound type as follows:
(default) : flat frequency response:
does not emphasize.
(ROCK) : speedy and heavy sound:
exaggerates bass and treble.
(POP) : wide-ranged and deep sound:
slightly emphasizes bass and
treble.
(VOCAL) : clear sound:
emphasizes middle tone and
slightly emphasizes treble.
Notes:
●If no operation takes place for more than 5 seconds in the SQ mode, the
display returns to the regular mode.
●Settings of SQ, bass/treble are influenced one another. If the influence
mentioned above causes distortion to audio signal, readjust bass/treble
or volume.
■Volume Adjustment (Setting range: 0 to 40)
■Mute
Sound Controls
(–12 to +12 in 2 dB step)
(–12 to +12 in 2 dB step)
(left/right: 1 to 15)
(front/rear: 1 to 15)
(0 to 40)
Bass
Treble
Balance
Note: If no operation takes place for 5 seconds or more (2 seconds in the volume
mode), the display return to the regular mode.
Fader
Press to select a mode
Press to switch on and off.
●Mute the sound completely.
Volume
Enjoy music in each mode
Radio
CD Player When a disc is loaded.
Press to select a mode as follows.
MONO OFF/LOCAL OFF
MONO ON/LOCAL OFF
MONO ON/LOCAL ON
MONO OFF/LOCAL ON
Press to select a band.
FM1
FM2
FM3
AM (LW/MW)
Mono/Local Selection
Mono: Reduce noise if weak signals are received
Local: Only strong signals of stations are searched for in seek tuning.
Display Change
Program Service Name
Frequency
Clock Time
(3 seconds)
Note: A station name appears when it is an RDS station.
■FM broadcast
Hold down [PTY] (MONO/LOCAL) for 2 seconds or more to
change the mode.
■AM(LW/MW) broadcast
Press [PTY] (MONO/LOCAL) to change the mode.
1
PTY (MONO/LOC)
DISP
2
1
2
■Seek tuning
Hold down for 0.5 seconds or more.
Tuning will automatically stop when the next sta-
tion is found.
[[]: higher frequency
[]]: lower frequency
■Manual Tuning
[[]: higher frequency
[]]: lower frequency
LOCAL OFF
LOCAL ON
Press
Display Change Press
FM broadcast AM(LW/MW) broadcast
Preset Memory
●Up to 6 stations can be stored in each of the FM1, FM2, FM3 and
AM (LW/MW) band selections.
Press to select a band for
preparation.
■Auto Preset Memory
Hold down for 2 seconds or more.
●Automatically tune the 6 stations with good reception and
save under preset buttons [1] to [6].
●Preset stations appear for 5 seconds each.
Notes:
●Only RDS stations will be saved at default setting (AF is
ON).
●To stop scanning, press one of the preset buttons [1] to
[6].
■Manual Preset Memory
Hold down one of the preset buttons [1] to [6] until
the display blinks once.
Note: New stations overwrite existing saved stations after following
this procedure.
Press [1] to [6] to call a preset station.
Caution: Never preset stations while driving.
■Preset station calling
Use seek or manual tuning to find a station.
Band
Preset Number
Frequency
Convenient
Function
Radio Data
System (RDS)
RDS is a system performing convenient functions for
FM stations in such as Europe. However, there may be
some areas where RDS is not effective for reception.
●Station name appears instead of the frequency.
●The clock is automatically adjusted.
AF
Alternative frequency
●When reception is poor, an RDS station broadcasting
the same program is tuned in automatically.
AF indicator
■To select AF receiving sensitivity
aPress [AF]
AF1 : For mountain areas and places enclosed by high-
rise buildings or other objects that prevent radio
reception. (Default)
AF2 : For suburbs and other places free of obstructions
of view.
OFF : For the AF function inactivated.
■To change AF range
aHold down [AF] for 2 seconds or more.
●REGION ON : To select a station broadcasting the
same program
●REGION OFF : To select an AF station of the same net-
work
(The program may be different) (Default)
■AF1 or AF2 auto preset memory
●The memory is valid for the RDS stations only.
●A station of the same network in good receiving condi-
tion is received.
●If a preset station is in poor receiving condition, anoth-
er station in good receiving condition can be tuned in
to by pressing the same preset button. (Best Station
Research)
●Another station broadcasting the same program is
searched for if a station with an appropriate frequency
cannot be found even by means of BSR (Best Stations
Research). (PI seek: Program Identification Seek)
Note: For PI Seek, cancel the TA mode first, then exe-
cute PI Seek.
TA
Traffic Announcements
●To automatically listen to a station
that gives traffic information periodically.
TA indicator TP indicator
Lights up while receiving a TP
station
■To select TA mode
aPress [TA].
(Default : TA OFF)
8To cancel aPress [TA] again.
Notes:
●If a selected station is in poor receiving condition,
another station giving traffic announcements will be
automatically tuned in.
●When TA ON is selected, only TP station will be
searched. When TA ON is selected, only TP station will
be memorized automatically.
●Even in CD player mode, a station giving the traffic
information is automatically received.
■To listen to TA only
aHold down [TA] for 2 seconds or more (in FM
mode).
●To cancel
aPress [TA] again. (Or, raise the volume with
[VOL]).
■TA Volume Set (Volume Level: 1 to 40)
aTurn [VOL] while receiving traffic announce-
ments.
●The TA volume differs from the regular volume (by up
to 5 levels).
Down Up
EON
Enhanced Other Networks
●Traffic information of the other networks is received.
●Preset AF data is refreshed at all times.
PTY
Program Type
●Stations can be selected by program type, for example,
news and rock.
PTY indicator
■To select mode PTY
aPress [PTY].
●To cancel
aPress [PTY] again.
■PTY preset call
aPress [1] to [6].
●The following program types are preseted.
■PTY selection
qPress []TUNE[]to select a program type
below.
wPress [BAND] for automatic selection.
■PTY preset change
qSelect a program type by using PTY selection
or PTY preset call.
wHold down [1] to [6] for 2 seconds or more.
Note: When there is no corresponding program type,
“NO PTY” is displayed.
■Emergency Announcement
●An emergency announcement, if broadcast, is automat-
ically received.
●This function operates in other than the radio mode,
and “ALARM” flashes.
Note: Press [DISP] to switch the PTY display language
to Swedish.
SPEECH
INFO
CULTURES
ROCK M
OTHER M
SOCIAL A
LEISURE
OLDIES
AFFAIRS
DRAMA
POP M
CLASSICS
CHILDREN
TRAVEL
NATIONAL
NEWS
EDUCATE
VARIED
LIGHT M
FINANCE
PHONE IN
COUNTRY
DOCUMENT
MUSIC
SPORT
SCIENCE
M_O_R_ M
WEATHER
RELIGION
JAZZ
FOLK M
Preset No. Program Type Contents
1NEWS NEWS
2SPEECH AFFAIRS, INFO, EDUCATE,
DRAMA, CULTURES, SCIENCE,
VARIED, WEATHER, FINANCE,
CHILDREN, SOCIAL A,
RELIGION, PHONE IN, TRAVEL,
LEISURE, DOCUMENT
3SPORT SPORT
4POP M POP M
5CLASSICS CLASSICS
6MUSIC ROCK M, M_O_R_M, LIGHT M,
OTHER M, JAZZ, COUNTRY,
NATIONAL, OLDIES, FOLK M
●Next track: [7]Press
●Start of current track: [6]Press once
●Previous track: [6]Press twice
●Fast forward: [7]Hold down
●Fast reverse: [6]Hold down
Release it to resume regular CD play.
Disc indicator
Make sure that the disc indicator is off before loading a
disc.
If the disc indicator lights, eject the disc, then load a new
disc.
Only discs with the label at right are available.
Track Number/Playing Time
Clock Time
■When a disc is not loaded
Insert a disc and playback starts automatically.
■Track selection and track search
CD-RW
CD-RW
CD-RW WMA
WMA
WMA
●Available Discs ●Non-available
MP3
MP3
MP3
8 cm
8 cm
8 cm
This unit does not support CD text display.
■Disc Eject
■Pause
Press [u] to stop CD play and eject the disc.
Press [BAND] (h/5)to pause. Press again to resume to playback.
●It takes several seconds between the instant when inserting a CD and the
instant when starting playback.
●Do not use discs that have a seal or label attached.
●Do not insert foreign matter into the disc slots.
●Press again to cancel in each play mode.
CQ-C1120AN
SQ
Radio
CD
Player
■RANDOM
●Random play
Press [4]. lights.
■SCAN
●10 seconds play of each track.
Press [5].
■REPEAT
●Repeat play
Press [6]. lights.
REP
R5
Playing Variation
Random indicator
Repeat indicator
CQ-C1120AN
MONO indicator
LOCAL indicator