Partel LUNOS e2 Series User manual

1
EN Installation Manual
Decentralised Ventilation
System with Heat Recovery
Series e²
- Please pass on to user -

2
9/R 160-500 036765
9/R 160-700 039891
e² 039993
e²kurz 040003
e²60 041157
4
5
6
7
Content
e²60kurz 040150 8
Electrical connection 9
Notes 10
11

3
min. 1m
min. 1m
min.1m
rot / red
blau / blue
lila / purple
Ø 162 mm 9/R 160-500/700
Steuerung / Controller
5/UNI-FT 040089
5/SC-FT 040113
5/GS 040092
TAC 039946
KNX Control4 039977
Netzteil / Power supply unit
5/NT18 039973
5/NT60 039974
5/NT100 040096
J-Y(St)Y 2x2x0,8mm
NYM 3x1,5mm
Geräte Serie e² /
Devices series e²
J-Y(St)Y 2x2x0,8mm
(S)
(T)
(U)
+
-
S
100-240V 50/60Hz
12V DC SELV

4
=
A
A
A
A
LUNOtherm
min. 100 mm
LUNOtherm-S
9/R 160-500 036765
9/R 160-700 039891
200 - 390 mm
Ø 162 mm
x
- 55 mm
3 mm
Ø 162 mm
+

5
e² 039993
1 (9/FIB-3R 037214)
+
35 mm 300 - 700 mm 17 mm
Ø180 mm
Ø 160 mm
180 mm
Unit voltage 12 V DC SELV, max. 12,6 V
Dimensions (Ø x l) Ø 154 mm, 243 mm
Protection class IP 22
Volume flow 15 - 38 m³/h
Sound power level 29 - 49 dB (A)
Sound pressure level 1 m 21 - 41 dB(A)
Heat recovery rate 88%
Specific power consumption 0,08 W/m³/h
Energy efficiency class A+
DIBt approval Z-51.3-450
9/IBE 039851 1/WE180 039852
243 mm

6
1 (9/FIB-3R 037214)
+
180 mm
Unit voltage 12 V DC SELV, max. 12,6 V
Dimensions (Ø x l) Ø 154 mm, 165 mm
Protection class IP 22
Volume flow 15 - 38 m³/h
Sound power level 29 - 49 dB (A)
Sound pressure level 1 m 21 - 41 dB(A)
Heat recovery rate 80%
Specific power consumption 0,08 W/m³/h
Energy efficiency class A+
DIBt approval -
200 - 300 mm
e²kurz / e²short 040003
9/IBE 039851 1/WE180 039852
165 mm

7
9/FIB-3R 037214
+
35 mm 300 - 700 mm 17 mm
Ø180 mm
180 mm
Unit voltage 12 V DC SELV, max. 12,6 V
Dimensions (Ø x l) Ø 154 mm, 243 mm
Protection class IP 22
Volume flow 5 - 60 m³/h
Sound power level 18 - 56 dB(A)
Sound pressure level 1 m 10 - 48 dB(A)
Heat recovery rate 83%
Specific power consumption 0,05 W/m³/h
Energy efficiency class A+
DIBt approval Z-51.3-450
e²60 041157
9/IBE 039851
1/WE180 039852
100 mm 100 mm 243 mm
9/SW 039850

8
9/FIB-3R 037214
+
Unit voltage 12 V DC SELV, max. 12,6 V
Dimensions (Ø x l) Ø 154 mm, 165 mm
Protection class IP 22
Volume flow 5 - 60 m³/h
Sound power level 18 - 56 dB(A)
Sound pressure level 1 m 10 - 48 dB(A)
Heat recovery rate 81%
Specific power consumption 0,05 W/m³/h
Energy efficiency class A+
DIBt approval -
e²60kurz / e²60short 040150
35 mm 200 - 500 mm 17 mm
180 mm
9/IBE 039851
1/WE180 039852
100 mm 100 mm 165 mm
9/SW 039850

9
Gerät / Device
+ - S1 + - S2
e² (1, 3, 5,...) e² (2, 4, 6,...)
-
+0-10 V Eingang / Input - TAC, 5/GS (optional)
T
R5/GS (optional)
R
T
+ rot / red
- blau / blue
S1 lila / purple
S2 lila / purple
Farbig markierte Ader /
Colour marked wire
+ 12 V
-
e² / e²kurz / e²short #3
e²60 / e²60kurz / e²60short #5
e² / e²kurz / e²short #3/4
e²60 / e²60kurz / e²60short (max. 40 m³/h) #5/6
e²60 / e²60kurz / e²60short (max. 60 m³/h) #7/8
5/UNI-FT 040089
5/SC-FT 040113
Gerät / Device
+ - S1 + - S2
e² (1, 3, 5,...) e² (2, 4, 6,...)

10
L
N
+ 12 V
-
0-10 V
+ 12 V
-
0-10 V
TAC 039946
100 - 240 V 50/60 Hz
Gerät / Device
+ - S1 + - S2
e² (1, 3) e² (2, 4)
AUX KNX
+- +-
L1.A
L2.A
L1.B
L2.B
KNX Control4 039977
AUX 24 - 32 V DC 18W
KNX 21 - 32 V DC
Gerät / Device 1 2 3 4
lila / purple S
rot / red + 12 V
blau / blue - GND
Taster / Push button

11
E124 06.21
Notes
 Read this manual carefully and completely before assembly! Always observe the general safety
instructions and the safety symbols with information in the text.
 Hand out this manual to the user (tenants, proprietors, property management etc.) after comple-
ting assembly.
The packaging must be sorted before disposal. If you wish to dispose of the device, observe
the currently applicable regulations. The municipal office in charge will provide information.
Do not position the device above sensitive furniture, surfaces or pictures; the wall beneath the device
should remain unused.
Do not position the device above or near room thermostats.
The solid plastic outer covers provided by LUNOS ensure high resistance to driving rain and can be
used in Stress Group III pursuant to DIN 4108-3 (2012-04). Metal or metal-coated covers can be
used in Stress Group I pursuant to DIN 4108-3 (2012-04).
In the case of buildings exposed to wind or the risk of strong winds and rain to the outer covers, fur-
ther measures of weather protection may be required.
Note regarding LUNOS outer covers
About this manual EN
Disposal
Installation position
Check the filter (1) every 3 months for contamination. Clean or replace, if required. After inserting the
filter, snap the design screen into place in “open position“.
The ventilation openings must not be covered or obstructed.
Note: Alternative inner screens are supplied with the corresponding instructions on filter re-
placement!
Filter replacement
Caution! Any assembly work (connection to power supply and setting of the miniature switches)
may only be carried out after disconnecting the supply voltage.
Make sure that the supply voltage of all connection lines is voltage-free (dead). (Separation from
the power supply with a minimum contact opening of 3 mm, e.g. electric fuse).
Each electric circuit of this ventilation system must be fitted with a residual current protection
(e.g. FI switch/RCCB).
Electric connection only by a specialist.
Additional installations and electrical components in the ventilation unit are not allowed.
Connection diagrams for further fan functions upon request.
Use the following cables for the electric connection:
 Cable to the ventilation units: e.g. J-Y(St)Y(2x2x0,8), min. 0,5 mm², max. 1,5 mm²
 Cable for the supply voltage of the power supply unit e.g. NYM 3 x 1,5 mm²
Electrical connection
Partel Ireland
Website: www.partel.ie
Email: [e-mail]
Phone: [phone]
Partel UK
Website: www.partel.co.uk
Email: [e-mail]
Phone: [phone]