Patio Festival PF19304 User manual

ASSEMBLY INSTRUCTIONS
Part# Reference Image QTY
B
E
H
A
C
D
I
K
1
1
1
1
8
6
1
1
M6*15
M6*30
Connect seat board (D) with across beam (E).
Connect armrests(A and B) with seat board (D) and across beam (E).
H and I bolts are used. Please do not tighten bolts to the end at this step.
Connect backrest (C) with across beam (E)(2 legs bottom).
2pcs M6*30 bolts (I) are used.
Please make sure all bolts are connected properly,
then tighten all bolts to the end.
Finish and enjoy your lounge.
E
D
II
A
H
H
DE
B
H
H
C
I
STEP 1
STEP 2
STEP 3
PF19304

ASSEMBLY TIPS: Please use the hardware and accessories included in the set. DO NOT use other electrical or manual tools.
In order to facilitate the assembly and make your final product firm and stable, please tighten by a few rounds each screw one by one.
After all screws are connected, then you start to tighten each screw to the end.
DO NOT tighten any screw to the end before you’ve connected all screws.
The assembly requires minimal level of DIY skills if you follow the instructions carefully.
In case you encounter any difficulty or have any questions, feel free to contact the store or manufacturer.
Place 4PCS legs( M )into the table top(L)
Connect the part N with 4 table legs（M）.
Make sure all bolts are connected properly,
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
A
B
NO.
N
AA
PART QTY.
L 1
NO.
PART QTY.
M 4
1
K
M6*28 4
1
C
AA
M6*28 bolts (AA) are used.
then tighten all bolts to the end.
STEP 3
Table is ready.
PF19304