Patiowell T-PS23-0230A User manual

METAL
GARDEN SHED
ASSEMBLY INSTRUCTIONS
SKU: T-PS23-0230A
https://www.patiowell.com/
pages/video-t-ps23-0230a
Metal Garden Shed
Installation Tutorial
[email protected]www.patiowell.com
BE
YOUR
LIFE BUILDER

BEFORE YOU BEGIN
PLAN AHEAD
02
Owner's Manual
Before beginning construction, check local building codes regarding footings, location and other
requirements.Study and understand this owner's manual. Important information and helpful tips will
make your construction easier and more enjoyable.
Watch the Weather: Be sure the day you select to install your building is dry and calm.
Do not attempt to assemble your building on a windy day. Be careful on wet or muddy ground.
Finish: For long lasting finish, periodically clean and wax the exterior surface. Touch-up scratches as
soon as you notice them on your unit. Irnmediately clean the area with a wire brush; wash it and
apply touch-up paint per manufacturer's recommendation.
Teamwork: Whenever possible, two or more people should work together to assemble
your building. One person can position parts or panels while the other is able to handle the
fasteners and the tools.
Tools and Materials: These are some basic tools and materials you will need for the
construction of your building. Decide which method of anchoring and the type of foundation
you wish to use in order to form a complete list of the materials you will need.
CARE & MAINTENANCE
Assembly Instructions: Instructions are supplied in this manual and contain all appropriate
information for your building model. Review all instructions before you begin.and during assembly,
follow the step sequence carefully for correct results.
Parts and Parts List: Check to be sure that you have all the necessary parts, you're your building
Separate contents of the carton by the part number while reviewing parts list.
The first few steps show how to join related parts to make larger sub
assemblies which will be used later.
Familiarize yourself with the hardware and fasteners for easier use during
construction.
These are packaged within the carton. Note that extra fasteners have been supplied for your
convenience.
Roof: Keep roof clear of leaves and snow with long handled, soft-bristled broom, Heavy amounts of
snow on roof can damage building making it unsafe to enter. In snow country, Roof Strengthening
Kits are available for most Arrow Buildings for added protection against heavy snow accumulation.
Doors: Always keep the door tracks clear of dirt and other debris that prevent them from sliding
easily. Lubricate door track annually with furniture polish or silicone spray, Keep doors closed and
locked to prevent wind damage.
Fasteners: Use all washers supplied to protect against weather infiltration and to protect the metal
from being scratched by screws. Regularly check your building for loose screws, bolts, nuts, etc, and
retighten them as necessary.
Moisture: A plastic sheet (vapor barrier) placed under the entire floor area with good ventilation will
reduce condensation.
Other Tips....
Wash o inked part numbers on coated panels with soap and water
Silicone caulking may be used for watertipht seals throughout the building.
Do not store swimming pool chemicals in your building, Combustibles and corrosives must be
stored in air tight approved containers.

03
BS1 X1 BS2 X1
BS2L X1
BS1L X1
WS3A X2
W1A X7
BF3 X2
PLATES
DLA X1
P3 X1
P2 X2DRA X1
WS2A X4
P1 X1
FOUNDATION

US1R X1
ULA X1 20 X4
9 X1 10L X1
B1 X4 DX2 X4
11 X110R X1
UR1 X1
04
12R X1
P4 X1
PLATES
21R X1
21L X1
12L X1
STRIPS

18 X2
17 X2
US1 X1
16 X115 X1
05
STRIPS
DF X1DC X2
STANDARD
DH X4 DG X1
V1 X115GC X4 GS X1 V2 X175

M4x10 M4x10 M5x12
06
F1 X215
SCREW
F2 X8 F3 X32 F4 X5
M4x16
F5 X4
M6x10

07
STRUCTURE VIEW
BF3
BF3
BS1L
BS2L
BS2
BS1
WS2A
WS2A
W1A
W1A
W1A
W1A
W1A W1A
W1A
WS2A
WS2A
UR1
ULA
WS3A
WS3A
DX2
DX2
DX2
DX2
DH
DH
DH
DH
DG
DF
DC
DC
20
20
20
20
GS
10L
10R
11
9
US1
USIR
21L
21R
12L
12R
B1 B1 B1 B1
GC
GC
GC
GC
15
16
18
17
17
18
P4
P2
P3
P2
P1
DLA
DRA

BS2L
BS2L
BS2L
BS2
BS2
F1
F1
BS1
BS1L
BS1
F1
F1
BS1L
BS1
F1 X2
F1 X2
STEP 1
STEP 2
08
BS2

F1 X4
STEP 3
09
F1 X4
STEP 4
F1
BS1
BF3
BS2
BS2L
BS1L
F1
BF3
BS2L
BF3
BS1
BS1
BF3
BS2L
BF3
BF3
F1
F1
BS1
BS1L
BF3
BS2
BS2L
BS2
BF3 BF3
BS2
BS1L
BF3
BS1L
BF3

F1 X3
STEP 5
10
STEP 6
F1
V2
WS2A
WS2A
WS2A
F1
WS2A
V2
BS1
BS1
V2 X3
F1 X3 V2 X3

STEP 7
F1 X4 V2 X4
STEP 8
F1 X4 V2 X4
11
F1
V2
WS2A
WS2A
F1
V2
BS1
BS1

STEP 9
12
F1 X2 V2 X2
STEP 10
F1 X3 V2 X2
US1
US1
US1R
US1R
GS
F1
F1
F1
BS1
BS1
You can gently pull the wall panel to insert accessories.
V2

STEP 11
13
F1 X7 V2 X7
STEP 12
F1 X4 V2 X4
10L
10R
10R
F1
F1
V2
F1 V2
X2
X4
X2
9
11
10R
10L
F1
V2
Fix the hole on the
top of 10L、10R

STEP 13
14
F1 X4 V2 X4
ULA ULA
F1
V2
F1
V2
ULA
ULA ULA

STEP 14
15
F1 X4 V2 X4
F1 F1
V2
V2
UR1
UR1
UR1
UR1
UR1

STEP 15
16
F1 X64 V2 X64
F1
V2
W1A
W1A
W1A
W1A
W1A
W1A
W1A
WS3A
WS3A
WS2A
W1A
W1A
W1A
W1A
W1A
W1A
W1A
WS3A
WS3A
WS3A

STEP 16
STEP 17
17
F2 X6 V2 X6
F2 X2F1 X22 V2 X22
B1
B1 B1
B1
12R
12L
F2
F2
F2
F2
F1
V2
V2
F2 V2
21R
21R
21L
21L
12L
12R
21L
21R
First, screw 12L and 12R onto the shed.
The leftmost and rightmost screws of the 12L and
12R are not fixed first.

F1 X36 V2 X36
STEP 18
18
F1
V2
P4
P2
P3
P2
P1

F5 X4F1 X2 V2 X2
STEP 19
19
x2
v2
F1 17
18 x4
F5
17
16
GC
18
18
17
16
15
17
F5

STEP 20
STEP 21
20
F4 X2F1 X10 V2 X8
DLA
20
20
Note: make clear the front and back of the door panel
outside
inside
F1
V2
F1
F4
DF