Pelsue PELAIR Series User manual

Part #122420-001
Product Manual:
PELAIR Series
Portable Air Conditioners
T.A. Pelsue Company
2500 South Tejon Street
Englewood, Colorado, USA 80110
Tel. [phone] or 303-936-7432
Fax. [phone]
Internet: www.pelsue.com
Email: [email protected]
ISO 9001 Certified

#122420-001 - Product Manual: PELAIR SERIES PORTABLE AIR CONDITIONER - Revision 05 - Date: 12-01-2008
Page 2

#122420-001 - Product Manual: PELAIR SERIES PORTABLE AIR CONDITIONER - Revision 05 - Date: 12-01-2008 Page 3
Since our inception in 1963 – the T.A. Pelsue Company has designed and manufactured high
quality equipment to improve the personnel ef-
ciency and working conditions in various under-
ground, conned, and outdoor areas.
Founded by T. Allen Pelsue, the company has estab-
lished a continuing reputation for excellence in the
production of ne products for a broad spectrum of
industry throughout the world.
Now, in our second generation of family direction,
continued commitment to innovation and quality
makes Pelsue a leading source of equipment for
many types of conned spaces. We specialize
in safety, retrieval, fall arrest, ventilation, cable
placing, splicing, and maintenance nationally and
abroad. With more than 70,000 square feet of facil-
ities available, Pelsue continues the dedication that
has made us pre-eminent in this eld.
ISO 9001 Certified

#122420-001 - Product Manual: PELAIR SERIES PORTABLE AIR CONDITIONER - Revision 05 - Date: 12-01-2008
Page 4
Table of Contents
Section Description Page #
1.0......................................General Information.................................. 5
1.1...........................Quality Policy
1.2...........................Pelsue Product Warranty
2.0......................................Introduction & Product Information........ 7
2.1...........................Serial Number
3.0......................................Conguration & Assembly........................ 8
3.1...........................Decal Location
3.2...........................Wiring Diagram
4.0...................................... Safety.......................................................... 12
4.1...........................Safety Alert Symbol
4.2...........................General Safety Information
5.0......................................Product Operation.....................................14
5.1...........................Product Description & Capabilities
5.2...........................Start-Up & Operating Procedures
5.3...........................Transporting
6.0......................................Troubleshooting........................................ 20

#122420-001 - Product Manual: PELAIR SERIES PORTABLE AIR CONDITIONER - Revision 05 - Date: 12-01-2008 Page 5
1.0 General Information
T.A. Pelsue Company
Quality Policy
OUR GOAL IS THE PURSUIT OF NEVER-ENDING IMPROVEMENT IN
PRODUCT QUALITY AND BUSINESS SYSTEMS.
METHODS TO BE EMPLOYED IN ATTAINING THIS GOAL WILL INCLUDE
NEW PRODUCT QUALITY PLANNING, EMPLOYEE TRAINING, AND
UTILIZATION OF EMPLOYEE INVOLVEMENT GROUPS TO SOLVE
PROBLEMS.
IN AN INCREASINGLY COMPETITIVE MARKETPLACE, ENSURING
CUSTOMER SATISFACTION IS ONE OF THE DIFFERENTIATORS THAT
SETS YOU APART FROM THE PACK AND YIELDS A COMPETITIVE
ADVANTAGE.
THEREFORE, WE WILL SUPPORT TOTAL CUSTOMER SATISFACTION BY
IMPLEMENTING THE ISO 9001 QUALITY SYSTEM AND PROVIDING
THE NECESSARY ATMOSPHERE AND TRAINING TO NURTURE THIS
CONCEPT THROUGHOUT OUR ORGANIZATION.
WE WILL MAKE EVERY BUSINESS DECISION AS THOUGH THE QUALITY OF
THE PART OR SERVICE PROVIDED WAS DESTINED FOR OUR OWN
OR OUR FAMILY’S USE. WE WILL ALWAYS THINK QUALITY FIRST.
EVERY T.A. PELSUE COMPANY EMPLOYEE IS EXPECTED TO COMMIT TO
THIS PHILOSOPHY IN THE PERFORMANCE OF HIS OR HER DAILY TASKS.
QUALITY FIRST!
T.A. PELSUE COMPANY SENIOR MANAGEMENT TEAM
1.1 Quality Policy

#122420-001 - Product Manual: PELAIR SERIES PORTABLE AIR CONDITIONER - Revision 05 - Date: 12-01-2008
Page 6
1.2 - Pelsue Product Warranty
Pelsue products are designed and engineered to perform as stated in published specications.
Quality materials and workmanship are used in the manufacture of this product. With regular
maintenance and proper care, Pelsue equipment provides many trouble free hours of opera-
tion.
The T.A. Pelsue Company warrants to the buyer that the portable air conditioning Product fur-
nished will conform to specications and will be free from defects in material and workmanship
from the date of shipment to the original buyer, for a period of 1 year (365 days). In the event of
failure of any components of a Pelsue product within the warranty period, service must be pre-
approved by the T.A. Pelsue Company, and service must be performed by the T.A. Pelsue Parts
and Service Department in Englewood, Colorado, or at the option of the T.A. Pelsue Company,
service may be performed at any designated service center, which may include any authorized
service center for the component manufacturer. Unauthorized repairs will not be covered by
this warranty.
Damage or failure due to misuse, mishandling, or unauthorized modications will not be covered
by this warranty. Unless otherwise agreed, the T.A. Pelsue Company shall repair or replace the
defective components within (30) calendar days of notice of failure. T.A. Pelsue Company’s
obligation hereunder, shall be limited to the repair or replacement of the product or component
as set forth above and shall not include any liability whatsoever for damages caused by such
failure, including, but not limited to consequential or incidental damages owing from use or
lack of use of product.
Any replacement, repair, modication, installation, or other service performed by the T.A. Pelsue
Company shall be warranted by the remainder of the unexpired period of the warranty, or for a
period of (90) calendar days, whichever is longer.
All materials or parts returned for credit or warranty shall be returned only with prior approval,
and will be subject to factory inspection before credit is allowed, Parts claimed defective will
be replaced upon request and will be invoiced as purchased, subject to credit when the parts
claimed to be defective have been received and examined by the factory.
This warranty is expressly in lieu of all other warranties expressed or implied, including any
warranties of merchantability or warranties of tness for any particular use and all other obliga-
tions or liabilities in connection with the sale of this equipment.
T.A. Pelsue Company, 2500 South Tejon Street, Englewood, Colorado 80110, 800-525-8460

#122420-001 - Product Manual: PELAIR SERIES PORTABLE AIR CONDITIONER - Revision 05 - Date: 12-01-2008 Page 7
DECAL LAYOUT
SHADED VIEW
PELSUE ARTWORK
SCALE 2:1
COLOR: BLACK
NOTES:
NUMBER STRING TO BE PROVIDED BY PURCHASING AT TIME OF
BY A SERIAL NUMBER STRING, EACH DECAL BEING UNIQUE. SERIAL
**THE TEXT: "SERIAL NO. PA30V-" TO BE IMMEDIATELY FOLLOWED
COLOR: SILVER BACKGROUND WITH BLACK TEXT & LOGOS
<PARA > IAW-UL FILE MH-11912 (N) CAT. PGGU2
HIGH TACK PERMANENT ACRYLIC ADHESIVE
POLYESTER FILM, .002 THICK WITH
MATERIAL: AVERY PX 2071-P/905-MATT CHROME
ORDER.
REVISIONS
ZONE REV. DESCRIPTION DATE B Y
ALL 00 ISSUED FOR FABRICATION 05-26-04 D. HAM
ALL 01 5 Lbs WAS 17oz 01-14-05 D. HAM
ALL 02 4 LBS WAS 5 LBS. ADDED ALKYLATE 07-08-05 D. HAM
ALL 03 MODELED IN SOLIDWORKS, CHARGE: 2.2 LBS WAS 4 LBS, NEW
PELSUE LOGO 11-21-08 A. CHAU
ENG:\
A. CHAU 11-21-08
DRIVE:
2500 SOUTH TEJON STREET
ONE WITHOUT THE PERMISSION OF THE T.A. PELSUE COMPANY."
SCALE 1:1
DO NOT SCALE DRAWING
TREATMENT
UNLESS OTHERWISE SPECIFIED
TOLERANCES ARE:
DIMENSIONS ARE IN INCHES
FINISH
PART NUMBER
DATE TITLE APPROVALS
CONTRACT NO.
DRAWN:
11-24-08DUKE
TO BE REPRODUCED, USED, OR DISCLOSED IN WHOLE OR IN PART TO ANY-
ENGLEWOOD, COLORADO 80110 USA
SHEET
FSCM NO. DWG. NO. REV .
12 29 13
122913-001
DECAL - IDENTIFICATION, RATING & SERIAL NUMBER
BLACK LETTERS ON SILVER BACKGROUND
MODEL #PELAIR30V
B
1 0F 1
03
O:\Portable\Drawings - Portable\122913.SLDDRW
N/A
N/A
05-26-04
SIZE
0.010
PORTABLE
"THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT
REVISION:
LATEST
D. HAM
FRACTIONS DECIMALS ANGLES
1/16 X.XX 0.03 2
X.XXX
CHECKED &
RELEASED:
DECAL LAYOUT
OUTLINE VIEW
4.250
3.625 R.250
TYP
DECAL LAYOUT
SHADED VIEW
PELSUE ARTWORK
SCALE 2:1
COLOR: BLACK
NOTES:
NUMBER STRING TO BE PROVIDED BY PURCHASING AT TIME OF
BY A SERIAL NUMBER STRING, EACH DECAL BEING UNIQUE. SERIAL
**THE TEXT: "SERIAL NO. PA15V-" TO BE IMMEDIATELY FOLLOWED
COLOR: SILVER BACKGROUND WITH BLACK TEXT & LOGOS
IAW-UL FILE MH-11912 (N) CAT. PGGU2
HIGH TACK PERMANENT ACRYLIC ADHESIVE
POLYESTER FILM, .002 THICK WITH
MATERIAL: AVERY PX 2071-P/905-MATT CHROME
ORDER.
REVISIONS
ZONE REV. DESCRIPTION DATE B Y
ALL 00 ISSUED FOR FABRICATION 05-22-04 D. HAM
ALL 01 5 Lbs WAS 17oz 01-14-05 D. HAM
ALL 02 4 LBS WAS 5 LBS. ADDED ALKYLATE 07-08-05 D. HAM
ALL 03 NEW PELSUE LOGO AND TITLE BLOCK 07-24-06 D. HAM
ALL 04 MODELED IN SOLIDWORKS, CHARGE: 2.0 LBS WAS 4 LBS 11-21-08 A. CHAU
DECAL LAYOUT
OUTLINE VIEW
4.250
3.625 R.250
TYP
ENG:\
A. CHAU 11-21-08
DRIVE:
2500 SOUTH TEJON STREET
ONE WITHOUT THE PERMISSION OF THE T.A. PELSUE COMPANY."
SCALE 1:1
DO NOT SCALE DRAWING
TREATMENT
UNLESS OTHERWISE SPECIFIED
TOLERANCES ARE:
DIMENSIONS ARE IN INCHES
FINISH
PART NUMBER
DATE TITLE APPROVALS
CONTRACT NO.
DRAWN:
11-24-08DUKE
TO BE REPRODUCED, USED, OR DISCLOSED IN WHOLE OR IN PART TO ANY-
ENGLEWOOD, COLORADO 80110 USA
SHEET
FSCM NO. DWG. NO. REV .
12 29 10
122910-001
DECAL - IDENTIFICATION, RATING & SERIAL NUMBER
BLACK LETTERS ON SILVER BACKGROUND
MODEL #PELAIR15V
B
1 0F 1
04
O:\Portable\Drawings - Portable\122910.SLDDRW
N/A
N/A
05-22-04
SIZE
0.010
PORTABLE
"THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT
REVISION:
LATEST
D. HAM
FRACTIONS DECIMALS ANGLES
1/16 X.XX 0.03 2
X.XXX
CHECKED &
RELEASED:
SCALE 1/6
FRONT VIEW
#15 ON HAND CART
#11, #14, #17, #18 ON BACK OR AIR HANDLER
1
7PURCHASEDSCREW - HEX HD, 1/4-20 UNC X 1" PLATED GRADE 5
3ASSY: SEE DWG #122334SUB ASSEMBLY - 2-WHEEL HAND CART122334-###1
4ASSY: SEE DWG #122414ASSEMBLY - AIR HANDLER - EXTERIOR ASSEMBLY122414-###1
5ASSY: SEE DWG #122393ASSEMBLY - ELECTRICAL BOX, 220VAC, 60HZ122393-###1
6PURCHASEDAIR FILTER ELEMENT - FIBERGLASS WITH CHIPBOARD FRAME120951-001
QTY.
REQD
PART OR
IDENTIFIYING NO.
NOMENCLATURE
OR DESCRIPTION MATERIAL SPECIFICATION ITEM NO.
PARTS LIST
4# 122642-000 REFRIGERANT - FREON R-22, 30 LB BOTTLE, CHLORODIFLUOROMETHANE PURCHASED 24
4 100048-112 LOCK NUT - HEX, #10-24, NYLON INSERT PURCHASED 23
4 68N-004300 WASHER - LOCK, INTERNAL TOOTH, #10, PLATED PURCHASED 22
4 111841-002 SCREW - MACHINE TRUSS HEAD, #10-24 UNC X 1/2" LG, BLACK OXIDE PURCHASED 21
1 122407-001 TEMPERATURE CONTROL ASSY - 24VAC X 15', CONTROLLER & CORD PURCHASED 20
1 122507-001 POWER CORD ASSY - 220VAC X 14' 10/4, W/ TWIST LOCK, 20A PLUG PURCHASED 19
1 122913-001 DECAL - IDENTIFICATION, RATING & SERIAL #, MODEL #PELAIR30V PURCHASED 18
1 103299-001 DECAL - "FOR SERVICE, PARTS & TECHNICAL INFO..." RED ON CHROME PURCHASED 17
2 122983-001 DECAL - "ALWAYS UP" BLACK TEXT ON CLEAR BACKGROUND MADE "IN-HOUSE" 16
3 111837-001 DECAL - DIRECTIONAL ARROW, BLACK PURCHASED 15
1 900306-001 DECAL - "INSPECTED BY - DATE", ADHESIVE BACK, 1.5" X 5/8" PURCHASED 14
1 122440-001 LABEL - !CAUTION! NEVER TRANSPORT OR OPERATE IN THE
HORIZONTAL.... PURCHASED 13
1 122441-001 LABEL - UNIT LEVEL & STABLE, NEVER RUN AT MORE THEN 7-DEG. ANGLE PURCHASED 12
1 123058-001 DECAL - ON / OFF, BLACK TEXT ON WHITE BACKGROUND MADE "IN-HOUSE" 11
2 101542-001 DECAL - "PELSUE" WITH "P" LOGO, 9" LONG, BLACK PURCHASED 10
6 100048-114 LOCK NUT - HEX, 1/4-20, NYLON INSERT PURCHASED 9
12 100050-009 WASHER - FLAT, 1/4 IN, TYPE A, W, PLATED PURCHASED 8
6 100604-010
REVISIONS
ZONE REV. DESCRIPTION DATE B Y
ALL 00 ISSUED FOR FABRICATION 03-29-05 D. HAM
ALL 01
ITEM-17 WAS ITEM-21 QTY 1 WAS 2, SHOWED BRADLEY LOOP &
COMPRESSOR SUPPORT, DELETED ITEM-12, 13, 18, 19 & 20,
RESTRUCTURED PART #'S AND B.O.M.
09-20-05 D. HAM
ALL 02 MODELED IN SOLIDWORKS, UPDATED DRAWINGS AND B.O.M. 11-07-08 A. CHAU
24,000 BTU, 240VAC, 60HZ POWER INPUT
ASSEMBLY - AIR CONDITIONER, PORTABLE
MODEL #PELAIR30V
D. HAM
11-07-08
A. CHAU
ENGLE
TO BE REPRODUCED, USED, OR DISCLOSED IN WHOLE OR IN PART TO ANY-
WOOD COLORADO 80110 USA
FINISH
TREATMENT
PART NUMBER
APPROVALS
DRIVE:
DRAWN
PROJECT
DATE
DWG. NO.FSCM NO.
122510-001: PELSUE YELLOW
LATEST
RELEASED 11-10-08
SHEET
2500 SOUTH TEJON STREET
ONE WITHOUT THE PERMISSION OF THE T.A. PELSUE COMPANY."
122510
O:\Portable\Drawings - Portable\122510.SLDDRW
PORTABLE
1:6
"THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT
REVISON:
03-29-05
SIZE
ENG:\
UNLESS OTHERWISE SPECIFIED
TOLERANCES ARE:
NONE
0.010 TITLE
SCALE
REV.
1 0F 1
02
D
DO NOT SCALE DRAWING
122510-002: GRAY HAMMER
NONE
FRACTIONS DECIMALS ANGLES
1/16 X.XX 0.03 2
X.XXX
CHECKED & DUKE
SIDE VIEW
SCALE 1/6
DIMETRIC VIEW
EXPLODED
8
6
5
21
22
98
23
23 7
8
9 8
7
8
19
20
3
4
9
ITEM #19 INTO BIGGER
STRAIN RELIEF
A
BACK VIEW
SCALE 1/6
DETAIL A
SCALE 1 : 1
CONNECT CORRESPONDING TUBING
FROM AIR HANDLER TO HAND CART
(2X TUBES)
TOP VIEW
SCALE 1/6
18 1
2"
2.0 - Introduction & Product Information
MODEL:_____________________________________________
Serial Number :_____________________________________
Congratulations on your choice of a Pelsue PELAIR Series Portable air conditioner. The Pelair Air Conditioner can
be used for the climate control of portable shelters in a variety of applications. Such use includes, but is not limited to
Fire, Police & Hazmat response crews in bio-terror and mass casualty incidents. This equipment has been designed
and manufactured to exceed durability requirements in order to meet the needs of the discriminating operator. Safe,
efcient and trouble-free operation and maintenance of the system requires that anyone who will be operating, maintain-
ing, or inspecting the equipment, read, understand and follow all of the operation, safety, maintenance, and inspection
instructions contained within this manual. This manual covers the Pelsue PELAIR Series Portable air conditioners. Use
the Table of Contents as a guide to nd specic information. Keep this manual handy for frequent reference and to pass
on to new operators.
This product is part of a system indented for usage in
a ventilation and climate control scenario. The user
must read, understand and follow the instructions
contained in this manual before using this equipment.
Failure to follow these instructions could result in seri-
ous injury or death.
2.1 - Serial Number
Product Serial Number
Always give your dealer the serial number of your Pelsue portable air conditioner
product when ordering parts or requesting service or other information. The rating
and serial number decal is permanently embossed with a serial number. The serial
number decal will be located on the back of the air handler as shown in Fig. 2a .
The serial number decal will appear as shown to the right in Fig. 2b and Fig. 2c. A
space has been provided below for the recording of the serial numbers for future
reference. Circle which model was purchased below.
Figure 2b: #PELAIR15V
Serial Number Decal
SERIAL
NUMBER
LOCATION
Figure 2a: Serial Number
Location
#PELAIR15V #PELAIR30V
Figure 2c: #PELAIR30V
Serial Number Decal

#122420-001 - Product Manual: PELAIR SERIES PORTABLE AIR CONDITIONER - Revision 05 - Date: 12-01-2008
Page 8
3.0 - Conguration & Assembly
Upon initial receipt of the PELAIR Series Portable Air Conditioner, inspect the packaging for any evidence that the
product may have been damaged in shipment. While unpacking the product, inspect all of the components for damage.
If damage to any of the components is discovered, Alert the shipping carrier immediately of the damage to the ship-
ment.
**Refer to parts list above if replacement parts are required. Replacement parts can be ordered from the
T.A. Pelsue Company at 800-525-8460.
Figure 3.0: #Pelair Series
Parts Diagram
4
1
2
3
5
AIR HANDLER:
Model #PELAIR15V - #122414-152
Model #PELAIR30V - #122414-002
ELECTRICAL BOX:
Model #PELAIR15V - #122421-002
Model #PELAIR30V - #122393-002
Replacement Parts Identication Table
(Refer to Figure 3.0, 3.1a, and 3.1b)
Item Part
Number Number Description
1 122334-002 Sub Assembly - 2 Wheel Hand Cart
2 120951-001 Air Filter Element - Fiberglass w/ Chipboard Frame, 11-3/4” x 11-3/4” x 3/4”
3 120951-002 Air Filter Element - Fiberglass w/ Chipboard Frame, 16” x 25” x 1”
4 122423-001 (#PELAIR15V) Power Cord Assembly - 120VAC x 10’, 12/3 Straight Plug
122507-001 (#PELAIR30V) Power Cord Assembly - 220VAC x 14’, 10/4 Twistlock
5 122407-001 Temperature Control Assembly - 24VAC x 15’, Controller & Cord
6 103299-001 Decal – Service & Parts Information
7 122440-001 Decal – !Caution! Never Transport of Operate in the Horizontal Position
8 122441-001 Decal – Unit Level & Stable, Never Run at More Than 7-Deg. Angle
9 112794-001 Decal – Caution - High Voltage
Verify that all parts are present before product use.
- The #Pelair Series Portable Air Conditioner is
shipped fully assembly and ready for use.

#122420-001 - Product Manual: PELAIR SERIES PORTABLE AIR CONDITIONER - Revision 05 - Date: 12-01-2008 Page 9
3.1 Decal Location
6. 103299-001
7. 122440-001
8. 122441-001
9. 112794-001
SCALE 1/6
FRONT VIEW
#15 ON HAND CART
#11, #14, #17, #18 ON BACK OR AIR HANDLER
1
7PURCHASEDSCREW - HEX HD, 1/4-20 UNC X 1" PLATED GRADE 5
3ASSY: SEE DWG #122334SUB ASSEMBLY - 2-WHEEL HAND CART122334-###1
4ASSY: SEE DWG #122414ASSEMBLY - AIR HANDLER - EXTERIOR ASSEMBLY122414-###1
5ASSY: SEE DWG #122393ASSEMBLY - ELECTRICAL BOX, 220VAC, 60HZ122393-###1
6PURCHASEDAIR FILTER ELEMENT - FIBERGLASS WITH CHIPBOARD FRAME120951-001
QTY.
REQD
PART OR
IDENTIFIYING NO.
NOMENCLATURE
OR DESCRIPTION MATERIAL SPECIFICATION ITEM NO.
PARTS LIST
4# 122642-000 REFRIGERANT - FREON R-22, 30 LB BOTTLE, CHLORODIFLUOROMETHANE PURCHASED 24
4 100048-112 LOCK NUT - HEX, #10-24, NYLON INSERT PURCHASED 23
4 68N-004300 WASHER - LOCK, INTERNAL TOOTH, #10, PLATED PURCHASED 22
4 111841-002 SCREW - MACHINE TRUSS HEAD, #10-24 UNC X 1/2" LG, BLACK OXIDE PURCHASED 21
1 122407-001 TEMPERATURE CONTROL ASSY - 24VAC X 15', CONTROLLER & CORD PURCHASED 20
1 122507-001 POWER CORD ASSY - 220VAC X 14' 10/4, W/ TWIST LOCK, 20A PLUG PURCHASED 19
1 122913-001 DECAL - IDENTIFICATION, RATING & SERIAL #, MODEL #PELAIR30V PURCHASED 18
1 103299-001 DECAL - "FOR SERVICE, PARTS & TECHNICAL INFO..." RED ON CHROME PURCHASED 17
2 122983-001 DECAL - "ALWAYS UP" BLACK TEXT ON CLEAR BACKGROUND MADE "IN-HOUSE" 16
3 111837-001 DECAL - DIRECTIONAL ARROW, BLACK PURCHASED 15
1 900306-001 DECAL - "INSPECTED BY - DATE", ADHESIVE BACK, 1.5" X 5/8" PURCHASED 14
1 122440-001 LABEL - !CAUTION! NEVER TRANSPORT OR OPERATE IN THE
HORIZONTAL.... PURCHASED 13
1 122441-001 LABEL - UNIT LEVEL & STABLE, NEVER RUN AT MORE THEN 7-DEG. ANGLE PURCHASED 12
1 123058-001 DECAL - ON / OFF, BLACK TEXT ON WHITE BACKGROUND MADE "IN-HOUSE" 11
2 101542-001 DECAL - "PELSUE" WITH "P" LOGO, 9" LONG, BLACK PURCHASED 10
6 100048-114 LOCK NUT - HEX, 1/4-20, NYLON INSERT PURCHASED 9
12 100050-009 WASHER - FLAT, 1/4 IN, TYPE A, W, PLATED PURCHASED 8
6 100604-010
REVISIONS
ZONE REV. DESCRIPTION DATE B Y
ALL 00 ISSUED FOR FABRICATION 03-29-05 D. HAM
ALL 01
ITEM-17 WAS ITEM-21 QTY 1 WAS 2, SHOWED BRADLEY LOOP &
COMPRESSOR SUPPORT, DELETED ITEM-12, 13, 18, 19 & 20,
RESTRUCTURED PART #'S AND B.O.M.
09-20-05 D. HAM
ALL 02 MODELED IN SOLIDWORKS, UPDATED DRAWINGS AND B.O.M. 11-07-08 A. CHAU
24,000 BTU, 240VAC, 60HZ POWER INPUT
ASSEMBLY - AIR CONDITIONER, PORTABLE
MODEL #PELAIR30V
D. HAM
11-07-08
A. CHAU
ENGLE
TO BE REPRODUCED, USED, OR DISCLOSED IN WHOLE OR IN PART TO ANY-
WOOD COLORADO 80110 USA
FINISH
TREATMENT
PART NUMBER
APPROVALS
DRIVE:
DRAWN
PROJECT
DATE
DWG. NO.FSCM NO.
122510-001: PELSUE YELLOW
LATEST
RELEASED 11-10-08
SHEET
2500 SOUTH TEJON STREET
ONE WITHOUT THE PERMISSION OF THE T.A. PELSUE COMPANY."
122510
O:\Portable\Drawings - Portable\122510.SLDDRW
PORTABLE
1:6
"THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT
REVISON:
03-29-05
SIZE
ENG:\
UNLESS OTHERWISE SPECIFIED
TOLERANCES ARE:
NONE
0.010 TITLE
SCALE
REV.
1 0F 1
02
D
DO NOT SCALE DRAWING
122510-002: GRAY HAMMER
NONE
FRACTIONS DECIMALS ANGLES
1/16 X.XX 0.03 2
X.XXX
CHECKED & DUKE
SIDE VIEW
SCALE 1/6
DIMETRIC VIEW
EXPLODED
8
6
5
21
22
98
23
23 7
8
9 8
7
8
19
20
3
4
9
ITEM #19 INTO BIGGER
STRAIN RELIEF
A
BACK VIEW
SCALE 1/6
DETAIL A
SCALE 1 : 1
CONNECT CORRESPONDING TUBING
FROM AIR HANDLER TO HAND CART
(2X TUBES)
TOP VIEW
SCALE 1/6
18 1
2"
Table 3.1a: #Pelair Series
Decal Locations - Back View
6
9
Table 3.1b #Pelair Series
Decal Locations - Top View
SCALE 1/6
FRONT VIEW
#15 ON HAND CART
#11, #14, #17, #18 ON BACK OR AIR HANDLER
1
7PURCHASEDSCREW - HEX HD, 1/4-20 UNC X 1" PLATED GRADE 5
3ASSY: SEE DWG #122334SUB ASSEMBLY - 2-WHEEL HAND CART122334-###1
4ASSY: SEE DWG #122414ASSEMBLY - AIR HANDLER - EXTERIOR ASSEMBLY122414-###1
5ASSY: SEE DWG #122393ASSEMBLY - ELECTRICAL BOX, 220VAC, 60HZ122393-###1
6PURCHASEDAIR FILTER ELEMENT - FIBERGLASS WITH CHIPBOARD FRAME120951-001
QTY.
REQD
PART OR
IDENTIFIYING NO.
NOMENCLATURE
OR DESCRIPTION MATERIAL SPECIFICATION ITEM NO.
PARTS LIST
4# 122642-000 REFRIGERANT - FREON R-22, 30 LB BOTTLE, CHLORODIFLUOROMETHANE PURCHASED 24
4 100048-112 LOCK NUT - HEX, #10-24, NYLON INSERT PURCHASED 23
4 68N-004300 WASHER - LOCK, INTERNAL TOOTH, #10, PLATED PURCHASED 22
4 111841-002 SCREW - MACHINE TRUSS HEAD, #10-24 UNC X 1/2" LG, BLACK OXIDE PURCHASED 21
1 122407-001 TEMPERATURE CONTROL ASSY - 24VAC X 15', CONTROLLER & CORD PURCHASED 20
1 122507-001 POWER CORD ASSY - 220VAC X 14' 10/4, W/ TWIST LOCK, 20A PLUG PURCHASED 19
1 122913-001 DECAL - IDENTIFICATION, RATING & SERIAL #, MODEL #PELAIR30V PURCHASED 18
1 103299-001 DECAL - "FOR SERVICE, PARTS & TECHNICAL INFO..." RED ON CHROME PURCHASED 17
2 122983-001 DECAL - "ALWAYS UP" BLACK TEXT ON CLEAR BACKGROUND MADE "IN-HOUSE" 16
3 111837-001 DECAL - DIRECTIONAL ARROW, BLACK PURCHASED 15
1 900306-001 DECAL - "INSPECTED BY - DATE", ADHESIVE BACK, 1.5" X 5/8" PURCHASED 14
1 122440-001 LABEL - !CAUTION! NEVER TRANSPORT OR OPERATE IN THE
HORIZONTAL.... PURCHASED 13
1 122441-001 LABEL - UNIT LEVEL & STABLE, NEVER RUN AT MORE THEN 7-DEG. ANGLE PURCHASED 12
1 123058-001 DECAL - ON / OFF, BLACK TEXT ON WHITE BACKGROUND MADE "IN-HOUSE" 11
2 101542-001 DECAL - "PELSUE" WITH "P" LOGO, 9" LONG, BLACK PURCHASED 10
6 100048-114 LOCK NUT - HEX, 1/4-20, NYLON INSERT PURCHASED 9
12 100050-009 WASHER - FLAT, 1/4 IN, TYPE A, W, PLATED PURCHASED 8
6 100604-010
REVISIONS
ZONE REV. DESCRIPTION DATE B Y
ALL 00 ISSUED FOR FABRICATION 03-29-05 D. HAM
ALL 01
ITEM-17 WAS ITEM-21 QTY 1 WAS 2, SHOWED BRADLEY LOOP &
COMPRESSOR SUPPORT, DELETED ITEM-12, 13, 18, 19 & 20,
RESTRUCTURED PART #'S AND B.O.M.
09-20-05 D. HAM
ALL 02 MODELED IN SOLIDWORKS, UPDATED DRAWINGS AND B.O.M. 11-07-08 A. CHAU
24,000 BTU, 240VAC, 60HZ POWER INPUT
ASSEMBLY - AIR CONDITIONER, PORTABLE
MODEL #PELAIR30V
D. HAM
11-07-08
A. CHAU
ENGLE
TO BE REPRODUCED, USED, OR DISCLOSED IN WHOLE OR IN PART TO ANY-
WOOD COLORADO 80110 USA
FINISH
TREATMENT
PART NUMBER
APPROVALS
DRIVE:
DRAWN
PROJECT
DATE
DWG. NO.FSCM NO.
122510-001: PELSUE YELLOW
LATEST
RELEASED 11-10-08
SHEET
2500 SOUTH TEJON STREET
ONE WITHOUT THE PERMISSION OF THE T.A. PELSUE COMPANY."
122510
O:\Portable\Drawings - Portable\122510.SLDDRW
PORTABLE
1:6
"THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT
REVISON:
03-29-05
SIZE
ENG:\
UNLESS OTHERWISE SPECIFIED
TOLERANCES ARE:
NONE
0.010 TITLE
SCALE
REV.
1 0F 1
02
D
DO NOT SCALE DRAWING
122510-002: GRAY HAMMER
NONE
FRACTIONS DECIMALS ANGLES
1/16 X.XX 0.03 2
X.XXX
CHECKED & DUKE
SIDE VIEW
SCALE 1/6
DIMETRIC VIEW
EXPLODED
8
6
5
21
22
98
23
23 7
8
9 8
7
8
19
20
3
4
9
ITEM #19 INTO BIGGER
STRAIN RELIEF
A
BACK VIEW
SCALE 1/6
DETAIL A
SCALE 1 : 1
CONNECT CORRESPONDING TUBING
FROM AIR HANDLER TO HAND CART
(2X TUBES)
TOP VIEW
SCALE 1/6
18 1
2"
7
8

#122420-001 - Product Manual: PELAIR SERIES PORTABLE AIR CONDITIONER - Revision 05 - Date: 12-01-2008
Page 10
3.2 Wiring Diagram
Shown below are the wiring diagrams for the #PELAIR15V and #PELAIR30V.
Figure 3.2a: #PELAIR15V
Wiring Diagram, 120VAC, 60Hz
LATEST
RELEASED
WIRING DIAGRAM - MODEL #PELAIR15V
PORTABLE AIR CONDITIONER
ENGLE
TO BE REPRODUCED, USED, OR DISCLOSED IN WHOLE OR IN PART TO ANY-
WOOD COLORADO 80110 USA
FINISH TREATMENT PART NUMBER
APPROVALS
DRIVE: DRAWN PROJECT
DATE
DWG. NO.FSCM NO.SIZE
TITLE
12-04-08
12-23-08
SHEET
2500 SOUTH TEJON STREET
ONE WITHOUT THE PERMISSION OF THE T.A. PELSUE COMPANY."
122419
O:\Portable\Drawings - Portable\122419.SLDDRW
PORTABLE
N/A 1 0F 1
04
D
CHAU
120VAC, 60HZ POWER INPUT
SCALE
D. HAM
REVISON:
02-01-05
DO NOT SCALE DRAWING
REV.
"THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT
0.010
TOLERANCES ARE: UNLESS OTHERWISE SPECIFIED
122419-001
N/A
N/A
ENG:\
FRACTIONS DECIMALS ANGLES
1/16 X.XX 0.03 2
X.XXX
CHECKED & DUKE
ZONE REV DESCRIPTION DATE BY
00 ISSUED FOR FABRICATION 02-01-05 D.HAM
01 BLACK WAS WHITE, SWITCHED WIRES 04-20-05 D.HAM
02 DELETED RELAY, ADDED CONTACTOR 09-19-05 D.HAM
ALL 03
NEW CIRCUIT BOARD & RUN CAPACITOR, DELETED START
CAPACITOR & POTENTIAL RELAY
07-17-06 D.HAM
ALL 04
CORRECTED WIRE COLORS, ADDED COMPRESSOR
GROUND WIRE, REMOVED NEUTRAL WIRE FROM
CONTACTOR
12-04-08 CHAU
REVISIONS
LATEST
RELEASED
WIRING DIAGRAM - MODEL #PELAIR15V
PORTABLE AIR CONDITIONER
ENGLE
TO BE REPRODUCED, USED, OR DISCLOSED IN WHOLE OR IN PART TO ANY-
WOOD COLORADO 80110 USA
FINISH TREATMENT PART NUMBER
APPROVALS
DRIVE: DRAWN PROJECT
DATE
DWG. NO.FSCM NO.SIZE
TITLE
12-04-08
12-23-08
SHEET
2500 SOUTH TEJON STREET
ONE WITHOUT THE PERMISSION OF THE T.A. PELSUE COMPANY."
122419
O:\Portable\Drawings - Portable\122419.SLDDRW
PORTABLE
N/A 1 0F 1
04
D
CHAU
120VAC, 60HZ POWER INPUT
SCALE
D. HAM
REVISON:
02-01-05
DO NOT SCALE DRAWING
REV.
"THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT
0.010
TOLERANCES ARE: UNLESS OTHERWISE SPECIFIED
122419-001
N/A
N/A
ENG:\
FRACTIONS DECIMALS ANGLES
1/16 X.XX 0.03 2
X.XXX
CHECKED & DUKE
ZONE REV DESCRIPTION DATE BY
00 ISSUED FOR FABRICATION 02-01-05 D.HAM
01 BLACK WAS WHITE, SWITCHED WIRES 04-20-05 D.HAM
02 DELETED RELAY, ADDED CONTACTOR 09-19-05 D.HAM
ALL 03
NEW CIRCUIT BOARD & RUN CAPACITOR, DELETED START
CAPACITOR & POTENTIAL RELAY
07-17-06 D.HAM
ALL 04
CORRECTED WIRE COLORS, ADDED COMPRESSOR
GROUND WIRE, REMOVED NEUTRAL WIRE FROM
CONTACTOR
12-04-08 CHAU
REVISIONS
LATEST
RELEASED
WIRING DIAGRAM - MODEL #PELAIR15V
PORTABLE AIR CONDITIONER
ENGLE
TO BE REPRODUCED, USED, OR DISCLOSED IN WHOLE OR IN PART TO ANY-
WOOD COLORADO 80110 USA
FINISH TREATMENT PART NUMBER
APPROVALS
DRIVE: DRAWN PROJECT
DATE
DWG. NO.FSCM NO.SIZE
TITLE
12-04-08
12-23-08
SHEET
2500 SOUTH TEJON STREET
ONE WITHOUT THE PERMISSION OF THE T.A. PELSUE COMPANY."
122419
O:\Portable\Drawings - Portable\122419.SLDDRW
PORTABLE
N/A 1 0F 1
04
D
CHAU
120VAC, 60HZ POWER INPUT
SCALE
D. HAM
REVISON:
02-01-05
DO NOT SCALE DRAWING
REV.
"THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT
0.010
TOLERANCES ARE: UNLESS OTHERWISE SPECIFIED
122419-001
N/A
N/A
ENG:\
FRACTIONS DECIMALS ANGLES
1/16 X.XX 0.03 2
X.XXX
CHECKED & DUKE
ZONE REV DESCRIPTION DATE BY
00 ISSUED FOR FABRICATION 02-01-05 D.HAM
01 BLACK WAS WHITE, SWITCHED WIRES 04-20-05 D.HAM
02 DELETED RELAY, ADDED CONTACTOR 09-19-05 D.HAM
ALL 03
NEW CIRCUIT BOARD & RUN CAPACITOR, DELETED START
CAPACITOR & POTENTIAL RELAY
07-17-06 D.HAM
ALL 04
CORRECTED WIRE COLORS, ADDED COMPRESSOR
GROUND WIRE, REMOVED NEUTRAL WIRE FROM
CONTACTOR
12-04-08 CHAU
REVISIONS