Pepperl+Fuchs OHV2000-F22-B15 User manual

OHV2000-F22-B15
Handheld Reader
FACTORY AUTOMATION
QUICK START GUI E

With regard to the supply of products, the current issue of the following document is applicable: The
General Terms of Delivery for Products and Services of the Electrical ndustry, published by the
Central Association of the Electrical ndustry (Zentralverband Elektrotechnik und Elektroindustrie
(ZVE ) e.V.) in its most recent version as well as the supplementary clause: "Expanded reservation
of proprietorship"
OHV2000-F22-B15

OHV2000-F22-B15
Contents
292677 2016-05
3
1 Purpose of this Quick Start Guide ...................................4
2 Product escription..........................................................5
2.1 Use and Application ................................................................................... 5
2.2 ndicators and Operating Elements ............................................................ 8
2.3 Scope of Delivery ....................................................................................... 9
2.4 Accessories................................................................................................ 9
2.5 Storage and Disposal ............................................................................... 10
3 Installation .......................................................................11
3.1 nserting and Removing the Battery ......................................................... 11
3.2 Mounting the Charger and Charging the Handheld Reader ..................... 12
4 Operation .........................................................................15
4.1 Switching On the Handheld Reader ......................................................... 15
4.2 Reading Codes ........................................................................................ 15
4.3 Bluetooth Mode........................................................................................ 16
4.4 Keyboard Layout ...................................................................................... 18
4.5 Activating Suffix........................................................................................ 22

OHV2000-F22-B15
Purpose of this Quick Start Guide
4
292677 2016-05
1 Purpose of this Quick Start Guide
This quick start guide contains basic instructions for operating the device.
However, the manual takes priority over the quick start guide.

OHV2000-F22-B15
Product Description
292677 2016-05
5
2 Product Description
2.1 Use and Application
The OHV2000 handheld is a compact handheld reader for all common 1-D and 2-
D codes applied directly to the surface of a product. For example, the code may
have been etched, printed, or laser-engraved on the housing.
Special technology to prevent glare allows the device to accurately read codes on
highly reflective surfaces. With its patented dual lens and a resolution of
1.2 million pixels, it can read both small and large codes from a wide range of
distances. A different-colored target projection makes it easier to see the relevant
code. Feedback comes in the form of a visual or audible signal or a vibration.
Caution!
rritation caused by optical radiation
The optical unit on the handheld reader is equipped with very bright LEDs that
can cause irritation in dark environments.
Do not point the handheld reader at people.
Do not look directly into the optical unit on the handheld reader.

OHV2000-F22-B15
Product Description
6
292677 2016-05
Using the Vision Configurator software, rule sets can be created for formatting
read results without the need for extensive programming work. This facilitates
integration into ERP systems. The read data is transferred via the Bluetooth
interface or by plugging the handheld reader into the charger. With its robust
housing and P65 protection, the handheld reader is suitable for outdoor use.
Type designations: OHV2000-F221-B15

OHV2000-F22-B15
Product Description
292677 2016-05
7
The device is only approved for appropriate and intended use. gnoring these
instructions will void any warranty and absolve the manufacturer from any liability.
Use the device only within the specified ambient and operating conditions.

OHV2000-F22-B15
Product Description
8
292677 2016-05
Protection of the personnel and the plant is not ensured if the device is not used
according to its intended use.
2.2 ndicators and Operating Elements
OHV2000-F221
1Memory
2Bluetooth connection
3Function indicator
4Trigger buttons
341 2 4

OHV2000-F22-B15
Product Description
292677 2016-05
9
2.3 Scope of Delivery
Check the packaging and contents for damage.
Check if you have received every item and if the items received are the ones you
ordered.
■ Handheld reader
OHV2000-F221-B15
■ Lithium-ion battery, 1300 mAh
OHV-BAT
■ Quick reference guide
2.4 Accessories
Designation Description
OHV-CHARGER-B15 Charging station for OHV200 handheld readers with integrated
Bluetooth modem
incl. USB-G-1M-PVC-ABG-USBB-G connection cable
The connection cable can also be ordered separately later on.
OHV-BAT 1300 mAh lithium-ion battery for OHV200 handheld readers
OHV-BAT-CHARGER Charger for lithium-ion batteries
Vision Configurator Configuration software for camera-based sensors
When using OHV handheld readers, you can download the
software free of charge from www.pepperl-fuchs.com.

OHV2000-F22-B15
Product Description
10
292677 2016-05
2.5 Storage and Disposal
Keep the original packaging. Always store and transport the device in the original
packaging.
Store the device in a clean and dry environment. The permitted ambient
conditions must be considered, see datasheet.
Disposing of device, packaging, and possibly contained batteries must be in
compliance with the applicable laws and guidelines of the respective country.

OHV2000-F22-B15
nstallation
292677 2016-05
11
3 nstallation
3.1 nserting and Removing the Battery
nserting the Battery
1. nsert the battery into the handheld reader.
2. Make sure that the battery audibly snaps into place.
Removing the Battery
1. Move the locking device on the bottom of the handheld reader in the direction
of the arrow.

OHV2000-F22-B15
nstallation
12
292677 2016-05
2. Remove the battery.
3.2 Mounting the Charger and Charging the Handheld Reader
Mounting the Charger
1. nsert the USB cable or the plug of the plug-in power supply into the socket
provided on the bottom of the charger.

OHV2000-F22-B15
nstallation
292677 2016-05
13
2. Place the charger in the position you wish to mount it.
3. Screw the charger into place using the mounting holes provided.
Charging the Handheld Reader
1. Ensure that the charger is connected to the USB cable or the plug of the plug-
in power supply.

OHV2000-F22-B15
nstallation
14
292677 2016-05
2. Place the handheld reader in the charger.
3. When the handheld reader's battery is charging, the battery's charge status
display flashes.
Charge Status isplay
To check the charge status of the lithium-ion battery, press the button on the back
of the battery.
Charge status LED 1 LED 2 LED 3 LED 4
75 % ... 100 % ON ON ON ON
50 % ... 75 % ON ON ON
25 % ... 50 % ON ON
10 % ... 25 % ON
0 % ... 10 % Flashing

OHV2000-F22-B15
Operation
292677 2016-05
15
4 Operation
4.1 Switching On the Handheld Reader
To switch on the handheld reader, hold down any trigger button for approx. two
seconds. The function indicator on the handheld reader briefly lights up red then
briefly lights up green. An audible signal is emitted and the handheld reader
vibrates.
4.2 Reading Codes
The handheld reader reads both very small 2-D codes (e.g., Data Matrix codes)
and larger 1-D codes (e.g., barcodes). The handheld reader offers a field of vision
comprising two areas that can be read at the same time. This covers a read range
between 4 cm and 31 cm. The optimal read range is 10 cm.
By default, the read range is indicated by two blue bars. However, you can
deactivate the display of the blue bars.
Tip
f several codes are located right next to each other, we recommend you cover the
codes that you do not wish to read. This prevents you from inadvertently reading
another code.

OHV2000-F22-B15
Operation
16
292677 2016-05
Reading Codes
The handheld reader registers itself with other devices as an input device or
keyboard. Before you read a code, start or activate the application to which the
read result is to be transferred.
1. To read the code, hold the trigger button down.
2. Position the blue bars in the center of the code that you wish to read. Move the
handheld reader closer to or farther away from the code until the height of the
blue bars roughly corresponds to the height of the code.
f the reading process is successful, the function indicator on the
handheld reader briefly lights up green. When activated, an audible signal is
emitted and the handheld reader vibrates.
4.3 Bluetooth Mode
Activating Bluetooth Mode
1. Activate the charger's Bluetooth function. Move the slider on the back/bottom
of the charger in the direction of the arrow.
2. f you switch to Bluetooth mode from some other operating mode, read the
following code using the handheld reader.
f the handheld reader was already in Bluetooth mode, you can skip this step.

OHV2000-F22-B15
Operation
292677 2016-05
17
3. Read the Quick Connect code on the front of the charger or the modem.
Bluetooth mode is activated. Read codes are transferred to the charger
via Bluetooth immediately after they are read. The charging tray then
automatically transfers the codes to the PC.
CC002942_Reader_step1_2
Note!
n Bluetooth mode, data is transferred using a US English keyboard layout by
default.
f data is not transferred correctly in Bluetooth mode, modify the keyboard layout.
See chapter 4.4

OHV2000-F22-B15
Operation
18
292677 2016-05
4.4 Keyboard Layout
You can use the following control codes to modify the keyboard layout for the
current operating mode.

OHV2000-F22-B15
Operation
292677 2016-05
19
Microsoft Windows
English (US) English (US nternational) English (GB)
German (Germany) German (Switzerland) French (France)
M10460_02
M10469_01
M10471_01
M10463_02
M10466_02
M10462_02

OHV2000-F22-B15
Operation
20
292677 2016-05
French (Belgium) Spanish (Spain) Spanish (Latin America)
Russian Japanese
M10461_02
M10472_01
M10465_02
M10418_02
M10464_02