Perfect Draft BBQ BLOWER User manual

Perfect Draft BBQ Blower
Quick Start Guide
PERFECT
What’s included
with your
BBQ Blower
1. The Perfect Draft BBQ Blower with High
Temperature Magnets
2. 12-volt Battery Charger
3. 8 foot Thermometer probe
4. 1” Safety hook with wing nut & screw
5. (On board) Rechargeable 12-volt
Samsung Battery
6. 120mm variable speed Fan
7. Adapter Spacer
CAUTION:
Always connect the Adapter Spacer to the
Perfect Draft while it’s connected to the re
box failure to do so can result in damage to
the outer shell of the Blower
Temperature Probe
description and placement
The temperature probe is made of braided stainless
but avoid exposing the thermocouple wires to direct
ame this can damage the probe. You can order
replacement probes from www.theperfectdraft.com
you can insert the probe under the lid of your pit.
Or drill a hole into the top of your lid and insert the
probe. (Do not pinch the probe wires)
Food Shown was cooked using the
Perfect Draft BBQ Blower!

Operating Your
BBQ Blower
When starting your BBQ re add your desired charcoal
and wood and light it. Next attach your Perfect Draft and
put the switch on manual operation to help regulate the
airow to get the re going. Once you have a good re
ip the switch to automatic mode and set to your desired
temperature 250 degrees.
How to adjust your Stack Exhaust (Flute) when
using Your Perfect Draft
Open the stack damper 100% when
starting your re
Close stack damper 50% - 60% for
medium to high temperature smoking
Close stack damper 75% - 85% for low
temperature smoking
If the Perfect Draft has trouble
maintaining the temperature adjust the
stack exhaust as needed.
Controlling the BBQ Blower in Automatic Mode
Note: The user can’t control the fan speed in Automatic mode
Perfect Draft BBQ Blower
Quick Start Guide
“Fully Charge the on board 12-volt battery
before using the unit only use the Charger
that came with the Perfect Draft or you will
damage the battery.” Installing The Perfect
Draft BBQ Blower with safety hook with
adapter spacer.
Drill a 1/4” inch hole just
above your air intake on
your firebox. Insert the
screw and safety hook into
your firebox. Connect the
hook end of the adapter to
the face of the Perfect
Draft.
Connected and secure
the Adapter to the Blower
Once connected, hook
the Perfect Draft onto your
firebox.
New Flexible
Adapter
(sold separately)
Attached the slot end of the
adapter into the safety hook slot.
Slide the hose clamp on the
adapter
Slide the exible hose on the
adapter and secure it with the
clamp
Attached the other adapter
to the front of the Blower and
secure it with the hose clamp.
1
1
2
4
3
2
Now Enjoy your
Perfect Draft Blower!
Plug the charger in here to recharge
the battery. The indicator light on the
head of the charger will show green
when fully charged.
Connect
temperature
probe here.
Manual position is down
position.
The user has control of the
fan speed in the manual
mode.
Set your
temperature
here.
Power Switch is
turned on in the
up position.
The Perfect Draft comes with 2 Types of
Adapters if your smoker rebox is larger
than 24” you need to buy our Flex Hose
to connect to your Perfect Draft Blower.