Perma 755 User manual

INDOOR / OUTDOOR
IMPORTANT! READ AND
FOLLOW THESE INSTRUCTIONS
CAREFULLY AND KEEP FOR
FUTURE REFERENCE.
This product complies with safety standard ASTM F1004 - 10.
Up to 71’’ | (1.8m)
33’’
(84cm)
Tall
Instruction Manual
Retractable
Gate
#755 #2741 #2739
#2725
INSTALLATION VIDEO

2
TABLE OF
CONTENTS
SAFETY INFORMATION
General
Maintenance
Warnings
Mountings
WHAT’S IN THE BOX
Parts
INSTALLATION
Gate Placement
Inside Opening or Doorway
Outside Opening or Doorway
With Skirting or Baseboard
To Remove
OPERATION
How to Open
Cleaning Instructions
SUPPORT
Warranty Certicate
Warranty Card
After Sales Support
03
03
04
06
08
10
11
15
16
17
18
19
20
21
21

3
SAFETY
INFORMATION
Read this instruction manual carefully and keep it in a safe place for
future reference. The correct use and maintenance of this product is
essential.
Regularly check that the gate is functioning correctly, lubricate
hinges and moving components with a suitable spray lubricant.
Tighten and adjust mounts to ensure secure smooth operation.
Inspect all components regularly and stop using if any component is
damaged or missing.
GENERAL
MAINTENANCE

4
WARNINGS
To prevent serious injury or death, securely
install gate or enclosure and use according to
manufacturer’s instructions.
Incorrect installation can be dangerous.
Danger to older children if climbing over the
product.
Do not use the safety barrier if any components
are damaged or missing.
The safety barrier must not be tted across
windows.
Never install this product on glass doors. Install
this product against reliable doors or walls.
If the safety barrier is used at the top of the stairs,
it should not be positioned below the top level.
If the safety barrier is used at the bottom of the
stairs, it should be positioned at the front of the
lowest tread possible.
This safety barrier is for domestic use only.
This safety barrier has a manual closing system.
Never leave the child unattended when using this
product.
Children have died or been seriously injured when
gates/enclosures are not securely installed.
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING

5
WARNINGS
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
Always check that the safety barrier is correctly
closed.
Use only with the locking/latching mechanism
securely engaged.
Gate must be installed as close to the ground as
possible, as per the installation guides.
Never use with a child able to climb over or
dislodge/open the gate or enclosure.
Regularly check that the safety barrier is properly
installed and secure.
Always install and use as directed using all parts.
Any additional or replacement parts should be
obtained from after sales support.
Barrier must be tted between rigid surfaces
such as plaster board, timber or hard wall.
This product is intended for use with children
from 6 to 24 months or small to medium pets
from 4.5kg (10 lbs) up to 18kg (40 lbs).
Do not put any goods which can be grabbed
by children or pets near this product to prevent
injury.
Before using this product, carefully inspect for
any loose parts and whether any parts need to
be tightened.
Never use to keep child away from pool.

6
MOUNTINGS
Gate must be installed in a structurally sound opening.
Ensure mounting surface (wall, door frame, stair posts, etc.) is
strong, rigid and has an even surface.
Note: If using gate on stairs, it must be placed either on the top
step or on the lowest step at the bottom.
Select the appropriate xing method from the following list.
Drill 5/64’’ (2mm) pilot holes
and use the wood screws
provided screwing directly
into the wood.
WOOD MOUNTING
Locate the wood stud and
follow the wood mounting
instructions. Do not mount
into dry wall without
additional support.
DRY WALL MOUNTING
Wood Screws
FOR INSTALLATION
SAFETY INFORMATION

7
Drill 5mm (3/16’’) pilot holes,
insert anchor and secure with
screws.
Drill 3/16’’ (5mm) pilot holes,
insert anchor and secure
with screws.
Wood Screws
Anchor
HARD WALL MOUNTING
BRICK
HARD WALL MOUNTING
CONCRETE
FOR
INSTALLATION
This gate must only be xed to a solid and secure surface. If unsure,
check with a qualied builder or trades person that the installation
you intend is suitable and safe within the chosen location.
PENCIL DRILL
TOOLS REQUIRED
PHILLIPS HEAD
SCREW DRIVER

8
PARTS
WHAT’S IN THE BOX
1 x
Gate Assembly
1 x Gate Mount Installation Guide
1 x Catch Mount Installation Guide

9
1 x
Upper Gate Mount
6 x
Wall Spacers
1 x
Lower Gate Mount
2 x
Catch Mounts
4 x
25mm (1”) Lower
Mount Screws
4 x 35mm (1 3/8”)
Upper Mount Screws
(use with spacers)
8 x
Wall Plugs

10
STEP 1:
GATE PLACEMENT
INSTALLATION
STEP 1:
GATE PLACEMENT
Outside Opening or Doorway
Inside Opening or Doorway
STEP 1:
GATE PLACEMENT
SUITABLE PLACEMENT OF GATE AND CATCH MOUNT