Philips BDP2850/05 User manual

EN User manual
Register your product and get support at
www.philips.com/welcome BDP2850

2
Important notes for users in U.K.
Mains plug
This apparatus is fitted with an approved moulded
plug. Should it become necessary to replace the
main fuse, this must be replaced with a fuse of
same value as indicated on the plug (example 10A).
1. Remove fuse cover and fuse.
2. The replacement fuse must comply with
BS1362 and have the A.S.T.A. approval mark. If
the fuse is lost, contact your dealer in order to
verify the correct type.
3. Refit the fuse cover.
In order to maintain conformity to the EMC
directive, the mains plug on this player must not
be detached from the mains cord.
Copyright in the U.K.
Recording and playback of material may require
consent. See Copyright Act 1956 and The
Performer’s Protection Acts 1958 to 1972.
LASER
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
CAUTION:
VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCK DEFEATED.
DO NOT STARE INTO BEAM.
LOCATION:
INSIDE, NEAR THE DECK MECHANISM.

3
English
EN
Contents
1 Important 4
Safety and important notice 4
Trademark notice 5
2 Your Blu-ray disc player 6
Feature highlights 6
Playable media 6
Product overview 6
3 Connect 8
Connect video/audio cables 8
Route audio to other devices 8
Connect a USB device 9
Connect network 9
Connect power 10
4 Get started 10
Prepare the remote control 10
Find the TV input 10
Use the Home menu 11
Navigate a menu 11
Select a menu display language 11
Set up a network 11
Use Philips EasyLink 12
5 Play 12
Play a disc 12
Play from a USB device 12
Play video 13
Play photo 15
Play music 16
6 Adjust settings 17
Video setup 17
Audio setup 18
Network setup 18
EasyLink setup 19
Preference setup 19
Advanced setup 20
7 Additional Information 21
Update software 21
Care 22
Specifications 22
8 Troubleshooting 23
9 Glossary 24

4
Please act according to your local rules and do not
dispose of your old products with your normal
household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot be
disposed with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries because correct
disposal helps to prevent negative consequences for
the environmental and human health.
Copyright notice
This item incorporates copy protection technology
that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation.
Reverse engineering and disassembly are
prohibited.
Open source software
Philips Electronics Hong Kong Ltd. hereby offers
to deliver, upon request, a copy of the complete
corresponding source code for the copyrighted
open source software packages used in this product
for which such offer is requested by the respective
licenses.
This offer is valid up to three years after product
purchase to anyone in receipt of this information.
To obtain source code, please contact
[e-mail]. If you prefer not to
use email or if you do not receive confirmation
receipt within a week after mailing to this email
address, please write to “Open Source Team,
Philips Intellectual Property & Standards, P.O. Box
220, 5600 AE Eindhoven, The Netherlands.” If you
do not receive timely confirmation of your letter,
please email to the email address above.
1 Important
Safety and important notice
Warning
Risk of overheating! Never install the product in a•
confined space. Always leave a space of at least 4 inches
around the product for ventilation. Ensure curtains or
other objects never cover the ventilation slots on the
product.
Never place the product, remote control or batteries
•
near naked flames or other heat sources, including direct
sunlight.
Only use this product indoors. Keep this product away
•
from water, moisture and liquid-filled objects.
Never place this product on other electrical equipment.
•
Keep away from this product during lightning storms.•
Where the mains plug or an appliance coupler is used as•
the disconnect device, the disconnect device shall remain
readily operable.
Visible and invisible laser radiation when open. Avoid
•
exposure to beam.
This product complies with the radio interference
requirements of the European Community.
Disposal of your old product and
batteries
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local separate
collection system for electrical and electronic
products.
CLASS 1
LASER PRODUCT
EN

5
BONUSVIEW™
‘BD LIVE’ and ‘BONUSVIEW’ are trademarks of
Blu-ray Disc Association.
‘DVD Video’ is a trademark of DVD Format/Logo
Licensing Corporation.
Java and all other Java trademarks and logos are
trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and/or other
countries.
Trademark notice
‘Blu-ray Disc’ and ‘Blu-ray Disc’ logo are
trademarks.
HDMI, and HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI licensing LLC.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents
issued & pending. DTS and the Symbol are
registered trademarks, & DTS 2.0+ Digital Out and
the DTS logos are trademarks of DTS, Inc. Product
includes software. © DTS, Inc. All Rights Reserved.
DivX®, DivX Certified®and associated logos are
registered trademarks of DivX, Inc. and are used
under license.
ABOUT DIVX VIDEO: DivX®is a digital video
format created by DivX, Inc. This is an official
DivX Certified device that plays DivX video.
Visit www.divx.com for more information and
software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified®device must be registered in order to
play DivX Video-on-Demand (VOD) content.
To generate the registration code, locate the
DivX VOD section in the device setup menu.
Go to vod.divx.com with this code to complete
the registration process and learn more about
DivX VOD.
English
EN

6
Region codes
You can play discs with the following region codes.
Region code Countries
DVD Blu-ray
Europe,
United
Kingdom
Product overview
Main unit
abcdefgh
aDisc compartment
bIR sensor
cDisplay panel
d
Open or close the disc compartment.•
e
Start or resume play.•
f
Pause play.•
g
Turn on this player or switch to standby•
mode.
hjack
Connect a USB flash drive.•
B
2 Your Blu-ray disc
player
Congratulations on your purchase, and welcome to
Philips! To fully benefit from the support that Philips
offers (e.g. product software upgrade), register your
product at www.philips.com/welcome.
If you contact Philips, you will be asked for the model
and serial number of this player.The model number
and serial number are on the back of this player.Write
the numbers here:
Model No. __________________________
Serial No. ___________________________
Feature highlights
For optimal performance of this player, it is
recommended to regularly update the software of
this player.
High-Definition entertainment
Watch high-definition content disc with HDTV
(High Definition Television). Connect it through
a high speed HDMI cable (1.3 or category 2). You
can enjoy excellent picture quality up to 1080p
resolution with the frame rate of 24 frames per
second with progressive scan output.
BD-Live
Connect this player to the movie studios website
via the LAN port to access a variety of up-to-date
content (e.g. refreshed previews and exclusive
special features).
Playable media
This player can play:
BD-Video, BD-R/RE2.0•
DVD, DVD-Video, DVD+R/+RW, DVD-R/-•
RW, DVD+R/-R DL (Dual Layer)
Video CD/SVCD•
Audio CD, CD-R/CD-RW, MP3 media, WMA•
media, JPEG files
DivX (Ultra) media•
USB flash drive•
EN

7
f
Return to a previous display menu.•
g/
Skip to the previous or next title, chapter,•
or track.
h/
Search backward or forward.•
iSUBTITLE
Select a subtitle language on a disc.•
jAUDIO
Select an audio language or channel on•
a disc.
kAlphanumeric buttons
Select an item to play.•
Enter values.•
l/
Stop play.•
Press and hold to open/close the disc•
compartment.
m
Pause play.•
Move the paused picture one step•
forward.
n
Start or resume play.•
o
Access options for the current activity or•
selection.
pTOP MENU
• BD: Display the top menu.
• DVD: Display the title menu.
qColor buttons
• BD: Select tasks or options.
Remote control
a
b
c
d
e
f
g
h
ij
k
l
m
n
o
p
q
a
Turn on this player or switch to standby•
mode.
When EasyLink is enabled, press and•
hold for at least three seconds to turn all
connected HDMI CEC compliant devices
to standby.
b
Access the home menu of this player.•
cDISC MENU / POP-UP MENU
• BD: Access or exit the pop-up menu.
• DVD: Access or exit the disc menu.
dOK
Confirm an entry or selection.•
e
Navigate through the menus.•
English
EN

8
Tip
If the TV has a DVI connector only, connect via an•
HDMI/DVI adaptor. Connect an audio cable for sound
output.
If there is a blank screen under HDMI connection, on the
•
remote control press and then press “731” (numeric
buttons) to recover picture display.
If this player connects to a TV compatible with 1080p
•
or 1080p/24Hz, Philips recommends HDMI category 2
cable, also known as High Speed HDMI cable, for optimal
video and audio output.
To play the digital video images of a BD-video or DVD-
•
video via an HDMI connection, it is necessary that both
this player and the display device (or an AV receiver/
amplifier) support a copyright protection system called
HDCP (high-bandwidth digital content protection system).
This connection provides best picture quality.
•
Option 2: Connect to the composite
video jack
1Connect a composite video cable to:
the• VIDEO (CVBS) jack on this player.
the VIDEO input jack on the TV.•
2Connect the audio cables to:
the• AUDIO OUT jacks on this player.
the AUDIO input jacks on the TV.•
Tip
The video input jack on the TV might be labeled as A/V•
IN, VIDEO IN, COMPOSITE or BASEBAND.
Route audio to other devices
You can route the audio from this player to other
devices.
VIDEO IN
AUDIO IN
3 Connect
AV cables are separately sold.
Make the following connections to use this player.
Basic connections:
Video•
Audio•
Power•
Optional connections:
Route audio to other devices•
HDMI-compliant AV receiver/amplifier•
Digital AV amplifier/receiver•
Analog stereo system•
USB device•
LAN (network)•
Note
Refer to the type plate at the back or bottom of the•
product for identification and supply ratings.
Before you make or change any connections, ensure that
•
all the devices are disconnected from the power outlet.
Connect video/audio cables
Select the best video connection that the TV can
support.
• Option 1: Connect to the HDMI jack (for a
HDMI, DVI or HDCP-compliant TV).
• Option 2: Connect to the composite video
jack (for a standard TV).
Option 1: Connect to the HDMI jack
1Connect an HDMI cable (not supplied) to:
the• HDMI jack on this player.
the HDMI input jack on the TV.•
HDMI IN
EN

9
1Connect the audio cables to:
the• AUDIO OUTon this player.
the AUDIO input jacks on the device.•
Connect a USB device
A USB device provides an additional memory to
enjoy software updates and BD-Live.
1Connect a USB device to the (USB) jack
on the front panel of this player.
Note
Press• , and select [browse USB] in the menu to access
the content and play the files.
Connect a USB device only to the
• jack of this player.
Philips does not guarantee compatibility with all USB
•
devices.
Connect network
Connect this player to the network to enjoy software
updates and BD-Live.
1Connect the network cable (not supplied) to:
the• LAN jack on this player.
the LAN jack on the broadband modem•
or router.
Note
Internet access to Philips website for software update•
may not be allowed, depending on the router you use
or the Internet Service Provider’s policy. Contact your
Internet Service Provider for more information.
Connect to an HDMI-compliant AV
receiver/amplifier
1Connect an HDMI cable (not supplied) to:
the• HDMI jack on this player.
the HDMI jack input jack on the device.•
Tip
The HDMI connection provides best audio quality.•
Connect to a digital AV amplifier/receiver
Connect to coaxial jack
1Connect a coaxial cable (not supplied) to:
the• COAXIAL jack on this player.
the COAXIAL/DIGITAL input jack on•
the device.
Connect an analogue stereo system
HDMI IN
COAXIAL
AUDIO IN
English
EN

10
4 Get started
Caution
Use of controls or adjustments or performance of•
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
Prepare the remote control
1Press and push the battery compartment to
slide it open (see “1” in the illustration).
2Insert two AAA batteries with correct
polarity (+/-) as indicated.
3Push and slide back the battery compartment
(see “3” in the illustration).
Note
If you are not going to use the remote control for a long•
time, remove the batteries.
Do not mix batteries (old and new or carbon and
•
alkaline, etc.).
Batteries contain chemical substances, so they should be
•
disposed of properly.
Find the TV input
1Press to turn on this player.
2Turn on the TV and switch to the video input
(refer to the TV user manual on how to select
the A/V input).
Connect power
Caution
Risk of product damage! Ensure that the power supply•
voltage corresponds to the voltage printed on the back
of this player.
Before connecting the AC power cord, ensure you have
•
completed all other connections.
Note
The type plate is located on the back of this player.•
1Connect the AC power cable to the wall
socket.
This player is ready to be set up for use.»
EN

11
The language options may vary from•
different regions.
4Press to select a language, and press OK.
Set up a network
To enjoy software updates of this player and BD-
Live for certain Blu-ray discs, set up the network
connection.
Note
Ensure that the network cable is properly connected and•
the router is switched on.
1Connect this player to the broadband modem
or router.
2Press to display the home menu.
3Select [Setup] and press OK.
4Select [Network], and press .
5Select [Network Installation], and press OK.
6Follow the on-screen instructions to complete
the network installation.
Tip
You can check the status of the wired connection of•
this player (see “Adjust settings” > “Network Setup” >
[View Network Settings]).
View Network Settings
Network Installation
Video
Advanced
Audio
Network
Preference
EasyLink
Use the Home menu
1Press to display the home menu.
To start disc play, select• [play Disc].
To view the USB contents, select•
[browse USB].
To access the setup menus, select•
[Setup].
Navigate a menu
1When a menu is displayed, press the buttons
on the remote control to navigate.
Button Action
Move up or down.
Move left or right.
OK Confirm a selection.
Enter numbers.
Select a menu display language
Note
If this player is connected to a HDMI CEC compliant•
TV, skip this setting. It switches automatically to the
same OSD menu language as per your TV setting (if the
language set on TV is supported by this player).
1In the Home menu, select [Setup] and press
OK.
2Select [Preference], and press .
3Select [Menu Language], and press .
Video
Advanced
Audio
Network
Preference
EasyLink
Menu Language
Parental Control
Disc Menu
Audio
Subtitle
Screen Saver
Change Password
Auto Subtitle Shift
English
EN

12
5 Play
Play a disc
Caution
Do not place any objects other than discs into the disc•
compartment.
1Press on the front panel to open the disc
compartment.
You may also press and hold• / on the
remote control to open/close the disc
compartment.
2Insert a disc with its label facing up.
3Press to close the disc compartment and
start disc play.
To view disc play, turn on the TV to the•
video input.
To stop disc play, press• .
Note
Check disc/file formats supported (see “Your Blu-ray disc•
player” > “Playable media”).
If the password entry menu is displayed, enter the
•
password before you can play the locked or restricted
disc (see “Adjust settings” > “Preference Setup” >
[Parental Control] ).
If you pause or stop a disc, the screen saver appears after
•
10 minutes of inactivity. To deactivate the screen saver,
press any button.
After you pause or stop a disc and no button is pressed
•
within 30 minutes, this player automatically switches to
standby.
Play from a USB device
Play or view media files on the following USB devices:
flash drive•
memory card reader•
HDD (This player can detect only a portable•
hard disc drive with USB power peak current
no more than 500mA.)
Note
Loading BD-Live content from the internet may take•
some time, depending on the file size and the speed of
the internet connection.
Use Philips EasyLink
This player supports Philips EasyLink which uses the
HDMI CEC (Consumer Electronics Control) protocol.
You can use one single remote control to control
EasyLink-compliant devices that are connected
through HDMI connectors.
Note
To enable the EasyLink feature, you must turn on the•
HDMI CEC operations on the TV and on other devices
connected to TV. Refer to the TVs/devices manual for
details.
One-touch play
1Press (standby) to turn on this player.
The TV (if the TV supports one-touch play)»
automatically turns on and switches to the
correct video-in channel.
If a disc is loaded, disc play automatically»
starts.
One-touch standby
1Press and hold (standby) for more than 3
seconds.
All the connected devices (if the device»
supports one-touch standby) automatically
switch to standby.
Note
Philips does not guarantee interoperability with other•
HDMI CEC devices.
EN

13
Button Action
AUDIO Directly select an audio language
or channel on a disc.
SUBTITLE Directly select a subtitle language
on a disc.
Access the above mentioned
actions or more options (e.g.
repeat or shuffle play mode).
Note
Some operations may not work with some discs. See the•
information accompanying the disc for details.
Display menu
BD-video disc
• TOP MENU stop the video play and shows
the disc menu. This feature is disc-dependent.
• POP-UP MENU access to the BD-video disc
menu without interrupting disc play.
DVD-video disc
• TOP MENU display the root menu of a disc.
• DISC MENU display disc information and
guide you through the available functions in
the disc.
VCD/SVCD/DivX disc:
• DISC MENU display the content of the disc.
Tip
If the PBC setting is off, the VCD/SVCD skips the•
menu and starts play from the first title. To display the
menu before play, turn on the PBC setting (see “Adjust
settings” > [Preference] > [VCD PBC]).
Display play information
1During play, press .
The play options menu is displayed.»
2Select [Info] in the menu, and press OK.
The current status of disc play is displayed.»
1Connect a USB device to the (USB) jack
of this player.
2Press , and select [browse USB], and press
OK.
A contents menu is displayed.»
3Select a file to play, and press OK.
Play starts (see “Play video”,“Play photo”,»
Play music” for details).
To stop play, press• or remove the USB
device.
Note
Philips does not guarantee compatibility with all USB•
devices.
Not all digital cameras are supported. Digital cameras
•
that require PC programme installation are not
supported.
NTFS (New Technology File System) data format is not
•
supported.
Play video
Control video play
1Play a title.
2Use the remote control to control the play.
Button Action
Pause play.
Press repeatedly•to slow
forward play frame by frame.
Start or resume play.
Stop play.
/Skip to a previous/next title or chapter.
/Search fast-backward or fast-forward.
Press repeatedly to change the search
speed.
Press once•, and then press
repeatedly /to slow play
backward or forward.
Note
For BD discs with Java application, availability of the play•
resume function depends on specific discs.
Change video play
1Play a title.
2Use the remote control to change the play.
English
EN

14
3Select an angle option, and press OK.
Play changes to the selected angle.»
Note
Applicable only to discs that contain multi-angle scenes.•
Manually shift subtitle display
You can manually adjust the subtitle position on the
TV screen.
1During play, press .
The play options menu is displayed.»
2Select [Subtitle Shift] in the menu, and press
OK.
3Press the Navigation buttons ( ) to shift
the subtitle, and press OK.
Tip
Subtitle shift is not supported for DivX video with•
external subtitles.
Play BD-video
Blu-ray video disc has a larger capacity and supports
features such as high-definition videos, multi-
channel surround sounds, interactive menus and
so on.
1Insert a BD-video disc.
2Press , select [play Disc] and press OK.
3Play automatically starts, or select a play
option in the menu and press OK.
During play, you can press• TOP MENU
to display additional information, features
or content stored in the disc.
During play, you can press• POP-UP
MENU to display the disc menu without
interrupting disc play.
Enjoy BONUSVIEW
(Applicable only to a disc compatible with the
BONUSVIEW or Picture-in-Picture feature)
You can instantly view additional content (such as
commentaries) in a small screen window.
1Press .
The play options menu is displayed.»
2Select [PIP Selection] in the menu, and then
select [PIP], and press OK.
The secondary video window is turned on.»
3Select [2nd Audio Language] or [2nd Subtitle
Language] in the menu, and press .
4Select the language to play, and press OK.
Select a title/chapter
1During play, press .
The play options menu is displayed.»
2Select [Titles] or [Chapters] in the menu, and
press OK.
3Select the title or chapter number, and press
OK.
Skip play to a specific time
1During play, press .
The play options menu is displayed.»
2Select [Time Search] in the menu, and press OK.
3Press the Navigation buttons ( ) to change
the time to skip to, and press OK.
Zoom in/out
1During play, press .
The play options menu is displayed.»
2Select [Zoom] in the menu, and press OK.
3Press the Navigation buttons ( )to select a
zoom factor, and press OK.
4Press the Navigation buttons ( ) to
navigate in the zoomed picture.
To cancel zoom mode, press• to display
the zoom factor bar, and press the
Navigation buttons () until the zoom
factor [x1] is selected.
Repeat play for a specific section
1During play, press .
The play options menu is displayed.»
2Select [Repeat A-B] in the menu, and press
OK to set the starting point.
3Forward the video play, and press OK to set
the ending point.
Repeat play starts.»
To cancel repeat play mode, press• ,
and select [Repeat A-B] and press OK.
Note
The marked section for repeat play is only possible•
within a track/title.
View video play from different camera
angles
1During play, press .
The play options menu is displayed.»
2Select [Angle List] in the menu, and press .
EN

15
3Select a photo folder, and press OK to enter.
To select a photo, press the• Navigation
buttons.
To enlarge the selected photo and start•
slideshow, press OK.
4Press to start slideshow play.
Note
It may require longer time to display the disc content on•
the TV if large number of songs/photos compiled onto
one disc.
This player can only display digital camera pictures
•
according to the JPEG-EXIF format, typically used by
most digital cameras. It cannot display Motion JPEG,
or pictures in formats other than JPEG, or sound clips
associated with pictures.
Folders/files that exceed the supported limit of this
•
player cannot be displayed or played.
Control photo play
1Play a photo slideshow.
Press• to access play options, select an
option, and press OK.
During slideshow play, you may also press•
to flip a photo horizontally/vertically.
If the slideshow stops, press• to continue
play.
Set a slideshow interval and animation
1During play, press .
The play options menu is displayed.»
2Select [Duration per slide] in the menu, and
press OK.
3Select a duration, and press OK.
4Select [Slide Animation] in the menu, and
press OK.
5Select a type of animation effect, and press
OK.
Play a musical slideshow
Create a musical slideshow to play simultaneously
MP3/WMA music files and JPEG photo files.
Note
To create a musical slideshow, you must store the MP3/•
WMA and JPEG files on the same disc or USB device.
1Play MP3/WMA music.
2Press to return to the main menu.
Enjoy BD-LIVE
(Applicable only to a disc that enables BD-Live
bonus content. Ensure that this player is connected
to the Internet.)
Additional contents (such as movie trailers,
subtitles, etc.,) can be downloaded to this player’s
local storage or a connected USB storage device.
Special video data may be played while they are
being downloaded.
When the disc supporting BD-Live is played, this
player or disc’s ID can be sent to the content
provider via the internet. Services and functions to
be provided vary from disc to disc.
Play DivX®video
DivX video is a digital media format that retains
high quality despite a high rate of compression.
1Insert a disc or USB device that contains the
DivX videos.
2Press , select [play Disc] or [browse USB],
and press OK.
A contents menu is displayed.»
3Select a video folder, and press OK.
4Select a title to play, and press OK.
5Use the remote control to control the play.
Button Action
AUDIO Select an audio language or
channel.
SUBTITLE Select a subtitle language.
Stop play.
Note
You can only play DivX videos that were rented or•
purchased with the DivX registration code of this player
(see “Adjust Settings” > [Advanced] > [DivX®VOD
Code]).
You can play DivX video files of up to 4GB.
•
This player can display up to 45 characters in the subtitle.•
Play photo
Play photo as slideshow
You can play JPEG photos (files with .jpeg or .jpg
extensions).
1Insert a disc or USB device that contains the
JPEG photos.
2Press , select [play Disc]or [browse USB],
and press OK.
A contents menu is displayed.»
English
EN

16
Note
For disc recorded in multiple sessions, only the first•
session is played.
For a WMA file that is protected by Digital Rights
•
Management (DRM), it cannot be played on this player.
This player does not support MP3PRO audio format.
•
For any special character that is present in the MP3 track•
name (ID3) or album name, it might not be displayed
correctly on the screen because these characters are not
supported.
Folders/files that exceed the supported limit of this
•
player cannot be displayed or played.
3Navigate to enter a photo folder, and press
OK to start slideshow play.
Slideshow begins and continues till the end»
of the photo folder.
Audio continues to play until the end of»
the disc.
To stop the slideshow play, press• .
To stop the music play, press• again.
Play music
Control a track
1Play a track.
2Use the remote control to control the play.
Button Action
Pause play.
Start or resume play.
Stop play.
/Skip to a previous/next track.
Select an item to play.
/ Search fast-backward or fast-
forward. Press repeatedly to
change the search speed.
Access the repeat or shuffle
play mode.
Play MP3/WMA music
MP3/WMA is a type of compressed audio file (files
with .mp3, .wma extensions).
1Insert a disc or USB device that contains the
MP3/WMA music.
2Press , select [play Disc] or [browse USB],
and then press OK.
A contents menu is displayed.»
3Select a music folder, and press OK.
4Select a file to play, and press OK.
To return to the main menu, press• .
EN

17
• [21:9 Cinema] – For wide-screen TV of display
ratio 21:9.
Note
If• [4:3 Panscan] you have selected is not supported
by the disc, the screen displays in the [4:3 Letterbox]
format.
Help text display is available in all modes, except
• [21:9
Cinema].
For optimum viewing with Philips Cinema 21:9 TV, refer
•
to the TV’s user manual.
[HDMI Video]
Select an HDMI video output resolution that is
compatible with your TV display capability.
• [Auto] - Detect and select the best supported
video resolution automatically.
• [Native] - Set to original video resolution.
• [480i/576i], [480p/576p], [720p], [1080i],
[1080p], [1080p/24Hz] - Select a video
resolution setting that best is supported by the
TV. See the TV manual for details.
Note
If a selected video resolution is not supported with•
your TV and a blank screen appears, to recover picture
display, wait for 10 seconds, or on the remote control
press and then press “731” (numeric buttons).
For a composite (CVBS) connection, if no video output is
•
made when a video resolution under [HDMI Video] is set
to an HD resolution (1080p/24Hz, 1080p, 1080i, 720p),
connect this player to the TV with an HDMI connection to
play HD videos (for an HDMI connection, see “Connect”
> “Option 1: Connect to the HDMI jack”).
[HDMI Deep Color]
This feature is available only when the display
device is connected by an HDMI cable, and when it
supports deep color feature.
• [Auto] - Enjoy vivid images in over a billion
colors on Deep Color enabled TV.
• [On] - Enjoy vivid images in over a billion colors
on Deep Color enabled TV. Output 12 bit
color that reduces the posterization effect.
• [Off] - Output standard 8 bit color.
[Picture Settings]
Select a predefined set of picture color settings.
• [Standard] – Original color setting.
• [Vivid] – Vibrant color setting.
• [Cool] - Soft color setting.
• [Action] – Sharp color setting. It enhances
the details in the dark area. Ideal for action
movies.
• [Animation] – Contrast color setting. Ideal for
animated pictures.
6 Adjust settings
Note
If the setup option is grayed out, it means the setting•
cannot be changed at the current state.
Video setup
1Press .
2Select [Setup], and press OK.
3Select [Video], and press .
4Select an option, then press OK.
5Select a setting, then press OK.
To return to the previous menu, press• .
To exit the menu, press• .
[TV Display]
Select a display format:
• [4:3 Letterbox] – For 4:3 screen TV: wide-
screen display with black bars on the top and
bottom of the screen.
• [4:3 Panscan] – For 4:3 screen TV: full-height
display with the trimmed sides.
• [16:9 Widescreen] – For wide-screen TV:
display picture at ratio 16:9.
• [16:9] – For 16:9 screen TV: display picture at
ratio 4:3 for a disc with 4:3 ratio, with black
bars on the left and right side of the screen.
Standard
Video
Advanced
Audio
Network
Preference
EasyLink
English
EN

18
• [PCM] - The audio device does not support
multi-channel format. Audio is downmixed to
two-channel sound.
• [Bitstream] - Select the original audio to
experience Dolby or DTS audio (BD-video
special sound effect is disabled).
Note
Ensure that the audio format is supported by the disc•
and the connected audio device (amplifier/receiver).
When
• [Bitstream] is selected, interactive audio like
button sound is muted.
[PCM Downsampling]
Set the sampling rate for PCM audio output from
the DIGITAL OUT jack (coaxial/optical).
• [On] - PCM audio is down-sampled at 48kHz.
• [Off] - For BD or DVD recorded in LPCM
without copyright protection, two-channel
audio signals up to 96 kHz are output as LPCM
signals with no conversion.
Network setup
1Press .
2Select [Setup], and press OK.
3Select [Network], and press .
4Select an option, then press OK.
5Select a setting, then press OK.
To return to the previous menu, press• .
To exit the menu, press• .
[Network Installation]
Install the network connection.
[View Network Settings]
Display the information for the current network
status.
View Network Settings
Network Installation
Video
Advanced
Audio
Network
Preference
EasyLink
Audio setup
1Press .
2Select [Setup], and press OK.
3Select [Audio], and press .
4Select an option, then press OK.
5Select a setting, then press OK.
To return to the previous menu, press• .
To exit the menu, press• .
[Night Mode]
Increase a soft sound level such as dialogue to
make it easier to hear at a low volume, while
simultaneously decreasing a loud sound level.
• [Auto] - Detect and select a best sound level
at a low volume. Applicable to tracks with
Dolby TrueHD audio only.
• [On] – For quiet viewing at night.
• [Off] – For surround sound with a full dynamic
range.
Note
Applicable only to Dolby encoded DVD-video or BD-•
video.
[HDMI Audio]
Select an HDMI audio output when you connect
this player and the TV/audio device with an HDMI
cable.
• [Bitstream] – If the connected HDMI
device supports the appropriate HD audio
decoder,the original audio format on the disc is
sent. Otherwise, LPCM is sent.
• [Auto] – Detect and select the best supported
audio format automatically.
[Digital Audio]
Select an audio format for the sound output from
the DIGITAL OUT jack (coaxial/optical).
• [Auto] - Detect and select the best supported
audio format automatically.
Off
Auto
Auto
On
Video
Advanced
Audio
Network
Preference
EasyLink
EN

19
Preference setup
1Press .
2Select [Setup], and press OK.
3Select [Preference], and press .
4Select an option, then press OK.
5Select a setting, then press OK.
To return to the previous menu, press• .
To exit the menu, press• .
[Menu Language]
Select an on-screen menu language.
Note
If this player is connected to an HDMI CEC compliant•
TV using a HDMI cable, it switches automatically to the
same menu display language as per your TV setting (if the
language set on TV is supported by this player).
[Audio]
Select an audio language for disc play.
[Subtitle]
Select a subtitle language for disc play.
[Disc Menu]
Select a language for disc menu.
Note
If the language you have set is not available on the disc,•
the disc uses its own default language.
For some discs, the subtitle/audio language can only be
•
changed from the disc menu.
[Parental Control]
Restrict access to discs that are unsuitable for
children. These types of discs must be recorded
with ratings.
To access, enter your last set password or ‘0000’.
Menu Language
Parental Control
Disc Menu
Audio
Subtitle
Screen Saver
Change Password
English
English
English
Off
Off
On
Auto Subtitle Shift On
Video
Advanced
Audio
Network
Preference
EasyLink
EasyLink setup
1Press .
2Select [Setup], and press OK.
3Select [EasyLink], and press .
4Select an option, and press OK.
5Select a setting, and press OK.
To return to the previous menu, press• .
To exit the menu, press• .
[EasyLink]
This player supports Philips Easylink which uses
the HDMI CEC (Consumer Electronics Control)
protocol. You can use one single remote control
to control all EasyLink-compliant devices that are
connected through HDMI connectors.
• [On] - Turn on EasyLink features.
• [Off] - Disable EasyLink features.
[One Touch Play]
When you press (standby) to turn on this
player, the TV (if the TV supports one-touch play)
automatically turns on and switches to the video-in
channel. Disc play starts if there is a disc in this
player.
• [On] - Turn on one-touch play feature.
• [Off] - Disable one-touch play feature.
[One Touch Standby]
When you press and hold (standby), all the
connected HDMI CEC devices (if the device
supports one-touch standby) switch to standby
mode simultaneously.
• [On] - Turn on one-touch standby feature.
• [Off] - Disable one-touch standby feature.
Note
You must turn on the HDMI CEC operations on the TV/•
devices before you can enjoy the EasyLink controls. See
the TV/devices manual for details.
Philips does not guarantee 100% interoperability with all
•
HDMI CEC compliant devices.
One Touch Play
EasyLink
One Touch Standby
On
On
On
Video
Advanced
Audio
Network
Preference
EasyLink
English
EN

20
4Select an option, and press OK.
5Select a setting, and press OK.
To return to the previous menu, press• .
To exit the menu, press• .
[BD-Live Security]
You can restrict internet access for BD-Live bonus
contents which are available to certain Blu-ray discs.
• [On] - Internet access is prohibited for all BD-
Live contents.
• [Off] - Internet access is permitted for all BD-
Live contents.
[Software Update]
Update the software of this player (if a latest
version is available on Philips website) to enhance
the performance of this player.
• [USB] - Update software from the USB device
which is connected to this player.
• [Network] - Update software from the
internet.
Note
For detailed software updating, see “Additional•
information” > “Update software”.
[Clear Memory]
Delete BD-Live data that are automatically
downloaded on the connected USB device.
Tip
On the connected USB device, a folder named “BUDA”•
is automatically created to store the downloaded BD-
Live data.
[DivX®VOD Code]
Obtain the DivX®registration code or the
deregistration code.
Clear Memory
Software Update
Video
Advanced
Audio
Network
Preference
EasyLink
Note
Rated discs above the level you set in• [Parental Control]
require a password to be played.
The ratings are country-dependent. To allow all discs to
•
play, select ‘8’ for DVD-video and BD-Video.
Some discs have ratings printed on them but are not
•
recorded with ratings. This function has no effect on
such discs.
[Screen Saver]
Turn on or off the screen saver mode. It helps to
protect the TV screen from being damaged due to
over exposure to static image for being too long.
• [On] - Set the screen saver active after 10
minutes of inactivity (for example, in the pause
or stop mode)
• [Off] - Disable screen saver mode.
[Auto Subtitle Shift]
Turn on or off the automatic subtitle shift.
• [On] - The subtitle position on the TV screen
is automatically adjusted.
• [Off] - Disable the automatically subtitle shift.
[Change Password]
Set or change the password.
1) Press the Numeric buttons to enter the
password or your last set password. If you forget
the password, enter ‘0000’, then press OK.
2) Enter the new password.
3) Enter the same password again.
4) Move to [Confirm] in the menu and press OK.
[Auto Standby]
Turn on or off auto standby mode. It is an energy
saving feature.
• [On] - Switch to standby after 30 minutes
of inactivity (for example, in pause or stop
mode).
• [Off] - Disable auto standby mode.
[VCD PBC]
Turn on or off the content menu of VCDs/SVCDs
with PBC (playback control) feature.
• [On] - Display the index menu when you load
a disc for play.
• [Off] - Skip the menu and start play from the
first title.
Advanced setup
1Press .
2Select [Setup], and press OK.
3Select [Advanced], and press .
EN