Philips BDP5650/93 User manual

www.philips.com/support
User manual
Always there to help you
Register your product and get support at
Question?
Contact
Philips
BDP5650/93
WOOX Innovations Ltd.

4
Risk of injury or damage to the product!
• Visible and invisible laser radiation when
open. Avoid exposure to beam.
• Do not touch the disc optical lens inside
the disc compartment.
• Never place the product or any objects
on power cords or on other electrical
equipment.
• If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
Risk of overheating!
• Neverinstallthisproductinaconnedspace.
Always leave a space of at least four inches
around the product for ventilation. Make sure
that curtains or other objects never cover
the ventilation slots on the product.
Risk of contamination!
• Do not mix batteries (old and new or
carbon and alkaline, etc.).
• Remove batteries if they are exhausted or
if the remote control is not to be used for
a long time.
• Batteries contain chemical substances,
they should be disposed of properly.
Risk of swallowing batteries!
• The product/remote control may
contain a coin type battery, which can be
swallowed.
• Keep the battery out of reach of children
at all times!
Class II equipment symbol:
This symbol indicates that this product has a
double insulation system.
CLASS 1
LASER PRODUCT
English
Safety and
important notice
Read and understand all instructions before
you use this Blu-ray disc/ DVD player. If
damage is caused by failure to follow the
instructions, the warranty does not apply.
Safety
Risk of electric shock or re!
• Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact Philips Consumer Care
to have the product checked before use.
• Never place the product and accessories
nearnakedamesorotherheatsources,
including direct sunlight.
• Never insert objects into the ventilation
slots or other openings on the product.
• Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
• Batteries (battery pack or batteries
installed) shall not be exposed to excessive
heatsuchassunshine,reorthelike.
• Disconnect the product from the power
outlet before lightning storms.
• When you disconnect the power cord,
always pull the plug, never the cable.
Risk of short circuit or re!
• Before you connect the product to the
power outlet, ensure that the power
voltage matches the value printed on the
back or bottom of the product. Never
connect the product to the power outlet
if the voltage is different.
BDP5650_93_UM_V3.0.indb 4 10/9/2014 3:25:04 PM

5
Care of the environment
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products and batteries.
The correct disposal of these products helps
prevent potentially negative consequences on
the environment and human health.
Your product contains batteries, which cannot
be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries.The correct
disposal of batteries helps prevent potentially
negative consequences on the environment
and human health.
Please visit www.recycle.philips.com for additional
information on a recycling center in your area.
Copyright
This item incorporates copy protection
technology that is protected by U.S. patents
and other intellectual property rights of
Rovi Corporation. Reverse engineering and
disassembly are prohibited.
This product incorporates proprietary
technology under license from Verance
Corporation and is protected by U.S. Patent
7,369,677 and other U.S. and worldwide
patents issued and pending as well as copyright
and trade secret protection for certain aspects
of such technology. Cinavia is a trademark
of Verance Corporation. Copyright 2004-
2013 Verance Corporation. All rights reserved
3D health warning
• If you or your family has a history of
epilepsy or photosensitive seizures,
consult a medical professional before
exposingyourselftoashinglightsources,
rapid image sequences or 3D viewing.
• To avoid discomfort such as dizziness,
headache or disorientation, we
recommend not watching 3D for
extended periods of time. If you
experience any discomfort, stop watching
3D and do not immediately engage in any
potentially hazardous activity (for example
driving a car) until your symptoms have
disappeared. If symptoms persist, do not
resume watching 3D without consulting a
medicalprofessionalrst.
• Parents should monitor their children
during 3D viewing and ensure they
do not experience any discomfort as
mentioned above.Watching 3D is not
recommended for children under 6 years
of age as their visual system is not fully
developed yet.
Care for your product
• Do not insert any objects other than discs
into the disc compartment.
• Do not insert warped or cracked discs
into the disc compartment.
• Remove discs from the disc compartment
if you are not using the product for an
extended period of time.
• Onlyusemicroberclothtocleanthe
product.
BDP5650_93_UM_V3.0.indb 5 10/9/2014 3:25:05 PM

6
byVerance. Reverse engineering or disassembly
is prohibited.
Cinavia notice
This product uses Cinavia technology to
limit the use of unauthorized copies of some
commercially-producedlmandvideosand
their soundtracks. When a prohibited use of an
unauthorized copy is detected, a message will
be displayed and playback or copying will be
interrupted.
More information about Cinavia technology
is provided at the Cinavia Online Consumer
Information Center at http://www.cinavia.com.
To request additional information about
Cinavia by mail, send a postcard with your
mailing address to: Cinavia Consumer
Information Center, P.O. Box 86851, San Diego,
CA, 92138, USA.
Open source software
Philips Electronics Singapore hereby offers
to deliver, upon request, a copy of the
complete corresponding source code for the
copyrighted open source software packages
used in this product for which such delivery
is requested by the respective licenses.
This offer is valid up to three years after
product purchase to anyone in receipt of this
information.To obtain source code, please send
your request in English with product type to
[email protected]. If you prefer not to
useemailorifyoudonotreceiveconrmation
receipt within 2 weeks after mailing to this
email address, please write in English to “Open
Source Team, Philips Intellectual Property &
Standards, P.O. Box 220, 5600 AE Eindhoven,
The Netherlands”. If you do not receive timely
conrmationofyourletter,pleaseemailtothe
email address above.The texts of the licenses
and acknowledgements for open source
software used in this product are included on
aseparateleaet.
BDP5650_93_UM_V3.0.indb 6 10/9/2014 3:25:05 PM

7
User Manual
OPTICAL
( )
HDMI OUT
1
BDP5650_93_UM_V3.0.indb 7 10/9/2014 3:25:06 PM

8
OPTICAL
2
HDMI OUT
HDMI OUTHDMI
O
OPTICAL
BDP5650_93_UM_V3.0.indb 8 10/9/2014 3:25:07 PM

9
4
3
5
SOURCE
1
2
TV
BDP5650_93_UM_V3.0.indb 9 10/9/2014 3:25:08 PM

10
6
USB
DVD/VCD/CD
BD 3D
BD
DivX Plus HD/MKV
MP3 / JPEG
2
3
4
1
1
2
3
BDP5650_93_UM_V3.0.indb 10 10/9/2014 3:25:09 PM

1EN
English
Contents
1 Use your Blu-ray disc/ DVD player 2
Basic play control 2
Video, audio and picture options 3
DivX videos 4
Play a musical slideshow 5
BonusView on Blu-ray 5
BD-Live on Blu-ray 5
Play a Blu-ray 3D video 6
Set up a network 6
Voole 7
Browse PC through DLNA 7
Stream media from an Android device 7
Stream multimedia via Miracast 7
Use Philips EasyLink 8
2 Change settings 9
Picture 9
Sound 9
Network (installation, status...) 10
Preference (languages, parental
control...) 10
Advanced options (clear memory...) 11
3 Update software 11
Update software via the Internet 11
Update software via USB 11
4 Product specications 12
5 Troubleshooting 15
BDP5650_93_UM_V3.0.indb 1 10/9/2014 3:25:21 PM

2EN
1 Use your Blu-
ray disc/ DVD
player
Congratulations on your purchase, and
welcometoPhilips!Tofullybenetfrom
the support that Philips offers (e.g. product
software upgrade), register your product at
www.philips.com/welcome.
Basic play control
During play, press the following buttons to
control.
Button Action
Turn on the player, or switch
to standby.
Access the home menu.
BDP5650_93_UM_V3.0.indb 2 10/9/2014 3:25:22 PM

3EN
English
Button Action
DISC MENU Access or exit the disc menu
or Pop-up menu.
TOP MENU Access the main menu of a
video disc.
Navigate the menus.
Press to rotate a
picture clockwise or counter-
clockwise during slideshow.
OK Conrmaselectionorentry.
Return to a previous display
menu.
Access more options during
play.
Color
buttons
Select tasks or options for
Blu-ray discs.
Open or close the disc
compartment.
Start or resume play.
Pause play.
Press repeatedly to slow
forward frame by frame.
Stop play.
/ Skip to the previous or next
track,chapterorle.
/ Fast backward or forward.
Press repeatedly to change
the search speed.
Press once, and then press
to slow forward.
AUDIO Select an audio language or
channel.
SUBTITLE Select a subtitle language.
Alphanumeric
buttons
Select an item to play.
Enter values.
Enter letters via SMS style
entry.
Video, audio and picture
options
More options are available for video or picture
play from a disc or USB storage device.
Video options
Access more options during video play.
• [Audio language]: Select an audio
language.
• [Subtitle language]: Select a subtitle
language.
• [Subtitle shift]: Change the subtitle
position on the screen. Press to
change the subtitle position.
• [Info]: Display play information.
• [Character set]: Select a character set
that supports the DivX video subtitle
(only for DivX videos).
• [Time search]:Skiptoaspecictime
via the numeric buttons on the remote
control.
• [2nd audio language]: Select the second
audio language (only for Blu-ray discs that
support BonusView).
• [2nd subtitle language]: Select the second
subtitle language (only for Blu-ray discs
that support BonusView).
• [Titles]: Select a title.
• [Chapters]: Select a chapter.
• [Angle list]: Select a camera angle.
• [Menus]: Display a disc menu.
• [PIP selection]: Display a picture-in-
picture window (only for Blu-ray discs that
support BonusView).
2
3
1
BDP5650_93_UM_V3.0.indb 3 10/9/2014 3:25:25 PM

4EN
• [Zoom]: Zoom into a video picture. Press
to select a zoom factor.
• [Repeat]: Repeat a chapter or title.
• [Repeat A-B]: Mark two points within a
chapter for repeat play, or turn off repeat
mode.
• [Picture settings]:Selectapredened
color setting.
Note
•Available video options depend on the
video source.
Picture options
Access more options during slideshow.
• [Rotate +90]: Rotate a picture 90 degrees
clockwise.
• [Rotate -90]: Rotate a picture 90 degrees
counter-clockwise.
• [Zoom]: Zoom into a picture. Press
to select a zoom factor.
• [Info]: Display picture information.
• [Duration per slide]: Set a display interval
for a slideshow.
• [Slide animation]: Select a transition effect
for a slideshow.
• [Picture settings]:Selectapredened
color setting.
• [Repeat]: Repeat a selected folder.
2
3
1
Audio options
Press repeatedly to cycle through the
following options.
• Repeat the current track.
• Repeat all the tracks on the disc or folder.
• Play audio tracks in a random loop.
• Turn off a repeat mode.
DivX videos
You can play DivX videos from a disc or a USB
storage device.
VOD code for DivX
• Before you purchase DivX videos and
play them on this player, register this
player on www.divx.com using the DivX
VOD code.
• Display the DivX VOD code: press , and
select [Setup] > [Advanced] > [DivX®
VOD Code].
DivX subtitles
• Press SUBTITLE to select a language.
• If the subtitle is not displayed correctly,
change the character set that supports
the DivX subtitle. Select a character set:
press , and select [Character set].
Character set Languages
[Standard] English, Albanian, Danish,
Dutch, Finnish, French,
Gaelic, German, Italian,
Kurdish (Latin), Norwegian,
Portuguese, Spanish, Swedish,
and Turkish
BDP5650_93_UM_V3.0.indb 4 10/9/2014 3:25:25 PM

5EN
English
Character set Languages
[Central
Europe]
Albanian, Croat, Czech, Dutch,
English, German, Hungarian,
Irish, Polish, Romanian, Slovak,
Slovene, and Serbian
[Cyrillic] Bulgarian, Belorussian, English,
Macedonian, Moldavian,
Russian, Serbian, and
Ukrainian
[Greek] Greek
[Baltic] Estonian, Latvian and
Lithuanian
[Chinese] SimpliedChinese
[Chinese-
Traditional]
Traditional Chinese
[Korean] English and Korean
Note
•To use the subtitles, make sure that the
subtitlelehasthesamenameasthe
DivXvideolename.Forexample,ifthe
DivXvideoleisnamed“movie.avi",save
thesubtitleleas“movie.srt”,or“movie.
sub”.
•Thisplayercanplaysubtitlelesinthe
following formats: .srt, .sub, .txt, .ssa, and
.smi.
Play a musical slideshow
Play music and pictures simultaneously to
create a musical slideshow.
1 From a disc or connected USB storage
device,playamusicle.
2 Press , and go to the picture folder.
3 Select a picture from the same disc or
USB, and press OK to start slideshow.
4 Press to stop slideshow.
5 Press again to stop music play.
BonusView on Blu-ray
View special content (such as commentaries)
in a small screen window.
This feature is only applicable to Blu-ray discs
compatible with BonusView (also known as
picture in picture).
1 During play, press .
» The options menu is displayed.
2 Select [PIP selection] > [PIP], and press
OK.
» PIP options [1]/[2] depend on the
video contents.
» The secondary video window is
displayed.
3 Select [2nd audio language] or [2nd
subtitle language], and press OK.
BD-Live on Blu-ray
Access exclusive online services, such as movie
trailers, games, ringtones and other bonus
contents.
This feature is only applicable to Blu-ray discs
that are BD-Live enabled.
1 Prepare the Internet connection and set
upanetwork(see"Setupanetwork").
2 Connect a USB storage device to the
(USB) connector on this player.
• A USB storage device is used to store
the downloaded BD-Live content.
• To delete the BD-Live previously
downloaded on the USB storage
device for memory release, press
and select [Setup] > [Advanced] >
[Clear memory].
3 Play a disc that is BD-Live enabled.
4 On the disc menu, select the BD-Live
icon, and press OK.
» BD-Live starts to load.The loading
time depends on the disc and the
Internet connection.
BDP5650_93_UM_V3.0.indb 5 10/9/2014 3:25:26 PM

6EN
5 On the BD-Live interface, select an item
to access.
Note
•BD-Live services vary from discs and
countries.
•When you use BD-Live, data on the
disc and this player are accessed by the
content provider
•Use a USB storage device with at least
1GB of free space to store the download.
•If a USB hub is used with this player, do
not overload the USB hub with many USB
devicestoavoidinsufcientUSBpower.
Play a Blu-ray 3D video
What you need
• A 3D compliant TV
• This player is connected to the TV
through HDMI
• 3D glasses compatible with the TV
• 3D Blu-ray disc
1 Make sure that 3D output is turned on:
press , and select [Setup] > [Video]
>[Watch 3D video] > [Auto].
2 Play a Blu-ray 3D video.
3 Put on the 3D glasses for 3D effects.
• To turn off 3D output, press , and
select [Setup] > [Video] > [Watch
3D video] > [Off].
Set up a network
Connect this player to a computer network
and the Internet to access the services:
• Browse PC (DLNA): play photos, music,
andvideolesstreamedfromyour
computer.
• Voole: access online Voole services.
• Update software: update the software of
this player via the Internet.
• BD-Live: access online bonus features
(applicable to Blu-ray discs that are BD-
Live enabled).
1 Connect this player to a computer
network and the Internet, through wired
(Ethernet) or wireless connection.
• For wired connection, connect a
network cable (not supplied) to the
LAN port on the back panel of this
player.
• This player has a built-in Wi-Fi for a
wireless connection.
2 Perform the network installation.
PC (DLNA)
PC (DLNA)
BDP5650_93_UM_V3.0.indb 6 10/9/2014 3:25:28 PM

7EN
English
1) Press .
2) Select [Setup], and press OK.
3) Select [Network] > [Network
installation], and press OK.
4) Follow the instructions on the TV screen
to complete the installation.
Caution
•Before you connect to a network,
familiarize yourself with the network
router, media server software for DLNA,
and networking principles. If necessary,
read documentation accompanying
network components. Philips is not
responsible for lost, damaged, or corrupt
data.
Voole
With this player connected to the Internet, you
can stream movies andTV episodes.
1 Connect the home theater to the
Internet.
2 Press .
3 Select [Voole], and press OK.
» The default Voole page is displayed on
the TV screen.
4 Use the remote control to navigate and
select options.
• To exit Voole, press .
Button Action
Select an item on the video
playlist.
OK Conrmanentryorselection.
Start or resume play.
Pause play.
Stop play.
/ Skip backward or forward during
video play.
Browse PC through DLNA
Through this player, you can stream and play
video, music and photo from a computer on
your TV.
Before you start
• On your PC, install a DLNA-compliant
media server application (such as
Windows Media Player 11 or higher)
• OnyourPC,enablemediasharingandle
sharing(seethe"Help"documentinthe
media server application)
1 Connect this player and your PC in the
samehomenetwork(see"Setupa
network").
• For better video quality, use wired
network connection whenever
possible.
2 Press .
» The home menu is displayed on the
TV screen.
3 Select [browse PC], and press OK.
» A content browser is displayed.
4 Selectale,andpressOK to play.
• Use the remote control to control play.
Stream media from an
Android device
With Philips SimplyShare, through this player
youcanstreammedialesfromanAndroid
based device on yourTV. For details, visit
www.philips.com/support
Stream multimedia via Miracast
Through this player, you can stream audio and
videofromaMiracastcertieddevicetoyour
TV, and the screen of the Miracast device is
viewed on your TV.
BDP5650_93_UM_V3.0.indb 7 10/9/2014 3:25:28 PM

8EN
What you need
• Smartphones or tablets with Android 4.2/
Windows 8.1 or above, and check those
devices on whether Miracast feature is
available (the name of Miracast feature
may vary on different devices).
• Enable Miracast on your smartphone or
tablet (refer to a related user manual for
details).
• Make sure that Miracast is enabled on
this player (press , and select [Setup] >
[Network] > [Miracast break-in] > [On]).
1 Press to display the home menu screen
of this player.
2 On the Miracast source device, initiate the
search for this player and select this player
when it is found (refer to the source
device's user manual for details).
• Ifthisisthersttimethese2devices
are paired, an acknowledgement
message is displayed on your TV.
Accept it to continue the pairing.
• To cancel the pairing, press on the
remote control.
3 Wait until the media content from the
source device is displayed on your TV,
then choose the media to start play.
» Audio or video is streamed to your
TV through this player.
Note
•This player can store up to 10 Miracast
devices for pair-up, and can only connect a
singleMiracastcertieddeviceatatime.
•During Miracast connection,Wi-Fi
connection on this player is temporarily
suspended.
•To avoid interference from Bluetooth
transmission, turn off Bluetooth on your
Miracast device.
•During Miracast streaming, video
stuttering or audio dropouts may occur,
depending on your environment (video
streaming is up to 720p).
Use Philips EasyLink
This player supports Philips EasyLink which
uses the HDMI CEC (Consumer Electronics
Control) protocol.You can use a single remote
control to control EasyLink compliant devices
that are connected through HDMI. Philips does
not guarantee 100% interoperability with all
HDMI CEC devices.
1 Connect the HDMI CEC compliant
devices through HDMI, and turn on the
HDMI CEC operations on the TV and
other connected devices (see the user
manual of the TV or other devices for
details).
2 Press .
3 Select [Setup]> [EasyLink].
4 Select [On] under the options: [EasyLink],
[One Touch Play] and [One Touch
Standby].
» EasyLink function is turned on.
One Touch Play
When a video disc is in the disc
compartment, press to wake up the TV
from standby, and then play a disc.
One Touch Standby
When a connected device (for example TV)
is put to standby with its own remote control,
this player is put to standby automatically.
BDP5650_93_UM_V3.0.indb 8 10/9/2014 3:25:28 PM

9EN
English
2 Change settings
This section helps you change the settings of
this player.
Note
•You cannot change a menu option that is
grayed out.
•To return to the previous menu, press .
To exit the menu, press .
Picture
1 Press .
2 Select [Setup] > [Video] to access the
video setup options.
• [TV display]: Select a picture display
formattottheTVscreen.
• [HDMI video]: Select an HDMI video
resolution.
• [HDMI Deep Color]: Display colors with
more shades and hues when the video
content is recorded in Deep Color and
the TV supports this feature.
• [Picture settings]:Selectapredened
color setting.
Watch 3D video
1
2
3
• [Watch 3D video]: Set to 3D or 2D
output when playing a Blu-ray 3D disc.
The player must be connected to a 3D TV
through HDMI.
Note
•If you change a setting, make sure that the
TV supports the new setting.
Sound
1 Press .
2 Select [Setup] > [Audio] to access the
audio setup options.
• [Night mode]: Select quiet or full dynamic
sound. Night mode decreases the volume
of loud sound and increases the volume
of soft sound (such as speech).
• [HDMI audio]: Set an HDMI audio format
when this player is connected through
HDMI.
• [Digital audio]: Select an audio format
for the sound output when this player is
connected through a digital connector
(OPTICAL).
• [PCM downsampling]: Set the sampling
rate for PCM audio output when this
player is connected through a digital
connector (OPTICAL).
Note
•For settings related to HDMI, the TV must
be connected through HDMI.
•Night mode is only available for Dolby
TrueHD, Dolby Digital Plus encoded DVD
and Blu-ray discs.
BDP5650_93_UM_V3.0.indb 9 10/9/2014 3:25:29 PM

10 EN
Network (installation, status...)
1 Press .
2 Select [Setup] > [Network] to access the
network setup options.
• [Network installation]: Start a wired or
wireless installation to make the network
work.
• [View network settings]: Display the
current network status.
• [View wireless settings]: Display the
current Wi-Fi status.
• [Name your Product:]: Re-name this
playerforidenticationinahomenetwork.
• [Miracast break-in]:Turn on or off Miracast.
• [Miracast browser]: Scan for Miracast
devices.
• [Miracast role]: Force this player to be
Group Owner or automatically choose a
device to be Group Owner.
• [Auto]:The role of Group owner is
automatically determined between
the source device and this player
when connection is established.
• [Group owner]: Force this player
to be Group Owner and allow it
to select the channel to use for
establishing the link with the source
device.
Preference (languages,
parental control...)
1 Press .
2 Select [Setup] > [Preference] to access
the preference setup options.
• [Menu language]: Select an onscreen
display menu language.
• [Audio]: Select an audio language for video.
• [Subtitle]: Select a subtitle language for
video.
• [Disc Menu]: Select a menu language for
a video disc.
• [Parental Control]: Restrict access to
discs that are encoded with ratings. Input
"0000"toaccesstherestrictionoptions.
To play all discs irrespective of the rating,
selectlevel"8".
• [Screen Saver]: Enable or disable screen
saver mode. If enabled, the screen enters
idle mode after 10 minutes of inactivity
(for example, in pause or stop mode).
• [Auto Subtitle Shift]: Enable or disable
subtitle shift. If enabled, the subtitle
positionischangedautomaticallytotthe
TV screen (this feature works with some
Philips TVs only).
• [Change Password]: Set or change a
password to play a restricted disc. Input
"0000"ifyoudonothaveapasswordorif
you have forgotten your password.
• [Display Panel]: Change the brightness of
the display panel of the player.
• [Auto Standby]: Enable or disable auto
standby. If enabled, the player switches to
standby after 30 minutes of inactivity (for
example, in pause or stop mode).
• [Fast wake up]: Enable or disable the
player to wake up faster from standby. If
fast wakeup is turned off, less power is
consumed during standby.
• [VCD PBC]: Display or skip the content
menu forVCD and SVCD.
• [Auto play disc]: Enable or disable the
automatic disc playback after power on.
• [Auto play after video]: Enable or disable
sequential playback of videos from USB
or PC.
Note
•If your preferred language is not available
for disc language, audio or subtitle, you
can select [Other] from the menu options
and input 4-digit language code which can
be found at the back of this user manual.
•If you select a language which is not
available on a disc, this player uses the
default language of the disc.
BDP5650_93_UM_V3.0.indb 10 10/9/2014 3:25:29 PM

11EN
English
Advanced options (clear
memory...)
1 Press .
2 Select [Setup] > [Advanced] to access
the advanced setup options.
• [BD-Live security]: Restrict or allow
access to BD-Live (only for non-
commercial, user-created BD-Live discs).
• [Downmix mode]: Control 2-channel
stereo audio output.
• [Software update]: Select to update
software from a network or from USB
storage device.
• [Clear memory]: Delete the previous BD-
Live download on the USB storage device.
A"BUDA"folderisautomaticallycreated
to store the BD-Live download.
• [DivX®VOD Code]: Display the DivX®
registration code or the deregistration
code for this player.
• [Version information]: Display the
software version of this player.
• [Restore default settings]: Reset this
player to the default settings made at the
factory, except for password and parental
control level.
Note
•You cannot restrict Internet access on
commercial Blu-ray discs.
•Before you purchase DivX videos and play
them on this player, register this player on
www.divx.com with the DivX VOD code.
3 Update software
Before you update the software of this player,
check the current software version:
• Press , and then select [Setup] >
[Advanced] > [Version information], and
press OK.
Update software via the
Internet
1 Connect the player to the Internet (see
"Setupanetwork").
2 Press , and select [Setup].
3 Select [Advanced] > [Software update]>
[Network].
» If an upgrade media is detected, you
are prompted to start the update.
4 Follow the instructions on the TV screen
to update the software.
» When the update is complete, this
player automatically turns off and on
again.
Update software via USB
1 Check the latest software version on
www.philips.com/support.
• Search for your model and click on
"Softwareanddrivers".
2 Download the software into a USB
storage device.
a Unzip the download, and make sure
that the unzipped folder is named
"UPG".
b Put the "UPG" folder in the root
directory.
3 Connect the USB storage device to the
(USB) connector on this player.
BDP5650_93_UM_V3.0.indb 11 10/9/2014 3:25:29 PM

12 EN
4 Press , and select [Setup].
5 Select [Advanced] > [Software update]>
[USB].
» If an upgrade media is detected, you
are prompted to start the update.
6 Follow the instructions on the TV screen
to update the software.
» When the update is complete, this
player automatically turns off and on
again.
Caution
•Do not turn off the power or remove the
USB storage device when the software
update is in progress because you might
damage this player.
4 Product
specifications
Note
•Specicationsanddesignaresubjectto
change without notice.
Region code
This player can play discs with the following
region codes.
DVD Blu-ray Countries
China
Media formats
• BD-Video, BD 3D
• DVD-Video, DVD+R/+RW, DVD-R/-RW,
DVD+R/-R DL (Dual Layer)
• VCD/SVCD
• Audio CD, CD-R/CD-RW, MP3 media,
WMAmedia,JPEGles
• DivX (Ultra)/DivX Plus HD media, MKV
media
• USB storage device
File formats
• Audio:
• .aac,.mka,.mp3,.wma,.wav,.m4a,.ac,
.ogg
• Video:
• .avi, .divx, .mp4, .m4v, .ts, .mov, .mkv,
.m2ts, .mpg, .mpeg, .3gp
• Picture: .jpg, .jpeg, .gif, .png
C
BDP5650_93_UM_V3.0.indb 12 10/9/2014 3:25:30 PM