Philips BDP9500 User manual

BDP9500
Register your product and get support at
www.philips.com/welcome
EN User manual

2

3
English
EN
Contents
1 Important 4
Safety and important notice 4
Trademark notice 4
2 Your product 5
Feature highlights 5
Playable media 6
Product overview 6
3 Connect 8
Connect video/audio cables 8
Route audio to other devices 9
Connect USB device 10
Connect network 10
Connect power 11
4 Get started 11
Prepare the remote control 11
Find the correct viewing channel 11
Use the Home menu 11
Navigate the menu 11
Select menu display language 12
Setup network 12
Use Philips EasyLink 12
5 Play 13
Play a disc 13
Play from USB device 13
Play video 13
Play music 16
Play photo 16
6 Adjust settings 17
Video setup 17
Audio Setup 18
Preference Setup 19
EasyLink Setup 20
Advanced Setup 20
7 Additional Information 21
Update software 21
Care 22
Specifications 22
8 Troubleshooting 22
9 Glossary 24
Open Source Software 26

4
Copyright notice
This product
incorporates
copyright
protection
technology that is protected by method claims
of certain U.S. patents and other intellectual
property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright
protection technology must be authorised by
Macrovision Corporation, and is intended for
home and other limited viewing uses only unless
otherwise authorised by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Trademark notice
HDMI, and HDMI logo and
High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI
licensing LLC.
Windows Media and the Windows
logo are trademarks, or registered trademarks of
Microsoft Corporation in the United States and/or
other countries.
‘DVD Video’ is a trademark of
DVD Format/Logo Licensing Corporation.
‘Blu-ray Disc’ and ‘Blu-ray Disc’
logo are trademarks.
Manufactured under license from
Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
1 Important
Safety and important notice
Warning
Risk of overheating! Never install the product in a•
confined space. Always leave a space of at least 4 inches
around the product for ventilation. Ensure curtains or
other objects never cover the ventilation slots on the
product.
Never place the product, remote control or batteries
•
near naked flames or other heat sources, including direct
sunlight.
Only use this product indoors. Keep this product away
•
from water, moisture and liquid-filled objects.
Never place this product on other electrical equipment.
•
Keep away from this product during lightning storms.•
Where the mains plug or an appliance coupler is used as•
the disconnect device, the disconnect device shall remain
readily operable.
Visible and invisible laser radiation when open. Avoid
•
exposure to beam.
This product complies with the radio
interference requirements of the
European Community.
This product complies with the requirements of the
following directives and guidelines: 2004/108/EC,
2006/95/EC
Disposal of your old product and
batteries
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol
is attached to a product it means that
the product is covered by the European
Directive 2002/96/EC. Please inform
yourself about the local separate collection system
for electrical and electronic products.
Please act according to your local rules and do not
dispose of your old products with your normal
household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.
Please inform yourself about the local rules on
separate collection of batteries because correct
disposal helps to prevent negative consequences for
the environmental and human health.
EN

5
2 Your product
Congratulations on your purchase, and welcome to
Philips! To fully benefit from the support that Philips
offers, register your product at www.philips.com/
welcome.
Feature highlights
Philips EasyLink
Your product supports Philips EasyLink, which uses
the HDMI CEC (Consumer Electronics Control)
protocol. EasyLink-compliant devices that are
connected through HDMI connectors can be
controlled by a single remote control.
Note
Philips does not guarantee 100% interoperability with all•
HDMI CEC devices.
High-Definition entertainment
Watch high-definition content disc with HDTV
(High Definition Television). Connect it through
a high speed HDMI cable (1.3 or category 2). You
can enjoy excellent picture quality up to 1080p
resolution with the frame rate of 24 frames per
second with progressive scan output.
High fidelity 7.1 channel surround sound
This product supports the high-definition audio
such as Dolby Digital Plus, Dolby TrueHD and
DTS-HD Master Audio.
BD-Live
Connect this product to the movie studios website
via the LAN port to access a variety of up-to-date
content (e.g. refreshed previews and exclusive
special features). You can also enjoy next generation
possibilities, such as ringtone/wallpaper downloads,
peer-to-peer interactions, live events and gaming
activities.
CLASS 1
LASER PRODUCT
Manufactured under license
under U.S. Patent #’s: 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,226,616; 6,487,535;
7,392,195; 7,272,567; 7,333,929; 7,212,872 & other
U.S. and worldwide patents issued & pending. DTS
is a registered trademark and the DTS logos,
Symbol, DTS-HD and HTS-HD Master Audio |
Essential are trademarks of DTS, Inc. © 1996-2008
DTS, Inc. All Rights Reserved.
DivX, DivX
Ultra Certified, and associated logos are trademarks
of DivX, Inc. and are used under license.
Official DivX®Ultra Certified product.
Plays all versions of DivX ®video (including DivX ®
6) with enhanced playback of DivX®media files and
the DivX®Media Format.
Plays DivX®video with menus, subtitles and audio
tracks.
Java and all other Java trademarks and
logos are trademarks or registered trademarks of
Sun Microsystems, Inc. in the United States and/or
other countries.
BONUSVIEW™
‘BD LIVE’ and ‘BONUSVIEW’ are trademarks of
Blu-ray Disc Association.
‘AVCHD’ and ‘AVCHD’ logo are
trademarks of Matsushita Electric Industrial Co., Ltd
and Sony Corporation.
“Qdeo” and “QuiteVideo” are
trademarks of Marvell or its affiliates.
The USB-IF Logos are trademarks
of Universal Serial Bus Implementers Forum, Inc.
English
EN

6
a
Turn on this product or switch to•
standby mode.
When EasyLink is enabled, press and•
hold for at least three seconds to turn all
connected HDMI CEC compliant devices
to standby.
bDisplay panel
cIR sensor
Detect signals from the remote control.•
Point the remote control at the IR sensor.
dDisc compartment
e
Open or close the disc compartment.•
f
Start or resume play.•
g
Pause play.•
hjack with a sliding door
Sldie the door open to connect a USB•
flash drive.
Front panel
display
Description
LOADING Loading a disc.
UNSUPP The disc is not supported.
BD Blu-ray disc is recognized.
HDMI ERR The HDMI video resolution is
not supported by TV.
FASTFWD Fast forward mode.
FASTBWD Fast reverse mode.
SLOWFWD Slow forward mode.
SETTINGS Setup menu is displayed.
HOME Home menu is displayed.
CHAPTER Current chapter is in chapter
repeat mode.
DOLBY D Dolby Digital audio is being
played.
DOLBY HD Dolby HD audio is being
played.
UPGRADE Software upgrade is in
progress.
Qdeo video processing for movies in its purest form
Qdeo processing produces an image that has
reduced noise, enhanced color, improved contrast,
fine detail and an enhanced sense of depth, resulting
a quite, pleasing and immersive viewing experience.
Playable media
This product can play:
BD-Video, BD-R/RE2.0•
DVD, DVD-Video, DVD+R/+RW,•
DVD-R/-RW, DVD+R/-R DL (Dual Layer)
Video CD/SVCD•
Audio CD, CD-R/CD-RW, MP3-CD,•
WMA-CD
DivX (Ultra)-CD, Picture CD•
USB flash drive•
Region codes
You can play discs with the following region codes.
Region code Country
DVD BD
Asia Pacific,
Taiwan,
Korea
Russia, India
China
Note
The applicable disc region code depends on the products•
which are sold in different regions mentioned above.
Product overview
Main unit
abc d efgh
A
C
C
EN

7
cTOP MENU
• BD: Display the top menu.
• DVD: Display the title menu.
d
Access the home menu of this product.•
eDISC MENU / POP-UP MENU
• BD: Access or exit the pop-up menu.
• DVD: Access or exit the disc menu.
fOK
Confirm an entry or selection.•
g
Navigate through the menus.•
hBACK
Return to a previous display menu.•
i/
Skip to the previous or next title, chapter,•
or track.
j/
Search backward or forward.•
k
Mute TV volume (applicable only to•
certain Philips brand TVs).
lTV VOL +/-
Adjust TV volume (applicable only to•
certain Philips brand TVs).
mSUBTITLE
Select a subtitle language on a disc.•
nAUDIO
Select an audio language or channel on•
a disc.
oAlphanumeric buttons
Select an item to play.•
Enter values.•
p
Open or close the disc compartment.•
qTV CH +/-
Select a TV channel (applicable only to•
certain Philips brand TVs).
r
Stop play.•
s
Pause play.•
Move the paused picture one step•
forward.
t
Start or resume play.•
uINFO
Display the current status or the disc•
information.
vOPTIONS
Remote control
a
Turn on this product or switch to•
standby mode.
When EasyLink is enabled, press and•
hold for at least three seconds to turn all
connected HDMI CEC compliant devices
to standby.
bBONUSVIEW
Turn on or off the secondary video•
in a small screen window during play
(applicable only to a Blu-ray disc that
supports the BONUSVIEW or Picture-
In-Picture feature).
English
EN

8
Option 1: Connect to the HDMI jack
1Connect an HDMI cable (not supplied) to:
the• HDMI jack on this product.
the HDMI input jack on the TV.•
Tip
If the TV has a DVI connector only, connect via an HDMI/DVI•
adaptor. Connect an audio cable for sound output.
You can optimize the video output. Press the• HDMI
button repeatedly to select the best resolution the TV
can support.
If this product connects to a TV compatible with 1080p
•
or 1080p/24Hz, Philips recommends HDMI category 2
cable, also known as High Speed HDMI cable, for optimal
video and audio output.
To play the digital video images of a BD-video or DVD-
•
video via an HDMI connection, it is necessary that both this
product and the display device (or an AV receiver/amplifier)
support a copyright protection system called HDCP (high-
bandwidth digital content protection system).
This type of connection provides best picture quality.
•
Option 2: Connect to the component
video jack
1Connect the component video cables
(not supplied) to:
the• Y Pb/Cb Pr/Cr jacks on this product.
HDMI IN
PbY Pr
AUDIO IN
Access options for the current activity or•
selection.
wColor buttons
• BD: Select tasks or options.
xHDMI
Select the video resolution of HDMI output.•
yREPEAT
Select repeat play or shuffle play.•
3 Connect
Make the following connections to use this product.
Basic connections:
Video•
Audio•
Power•
Optional connections:
Route audio to other devices•
HDMI-compliant AV receiver/amplifier•
Multi-channel AV amplifier/receiver•
Digital AV amplifier/receiver•
Analog stereo system•
USB device•
LAN (network)•
Note
Refer to the type plate at the back or bottom of the•
product for identification and supply ratings.
Before you make or change any connections, ensure that
•
all devices are disconnected from the power outlet.
Different types of connectors can be used to connect•
this product, depending on availability and your needs. A
comprehensive interactive guide to help you connect your
product is available at www.connectivityguide.philips.com.
Connect video/audio cables
Connect this product to TV to view disc play.
Select the best video connection that the TV can
support.
• Option 1: Connect to the HDMI jack (for a
HDMI, DVI or HDCP-compliant TV).
• Option 2: Connect to the component video jacks
(for a standard TV or Progressive Scan TV).
• Option 3: Connect to the composite video
jack (for a standard TV).
Note
You must connect this product directly to a TV.•
EN

9
Connect to HDMI-compliant AV receiver/
amplifier
1Connect an HDMI cable (not supplied) to:
the• HDMI jack on this product.
the HDMI jack input jack on the device.•
Tip
The HDMI connection provides best audio quality.•
Connect to multi-channel AV receiver/
amplifier
1Connect the 7.1-channel audio cables (not
supplied) to:
the• 7.1 CH AUDIO OUT jacks on this
product.
the corresponding AUDIO input jacks on•
the device.
7.1 CH AUDIO IN
the COMPONENT VIDEO input jacks•
on the TV.
2Connect the audio cables to:
the• AUDIO L/R-LINE OUT jacks on this
product.
the AUDIO input jacks on the TV.•
Tip
The component video input jack on the TV might be•
labeled as Y Pb Pr or YUV.
This type of connection provides good picture quality.
•
Option 3: Connect to the composite
video jack
1Connect a composite video cable to:
the• VIDEO jack on this product.
the VIDEO input jack on the TV.•
2Connect the audio cables to:
the• AUDIO L/R-LINE OUT jacks on this
product.
the AUDIO input jacks on the TV.•
Tip
The video input jack on the TV might be labeled as A/V•
IN, VIDEO IN, COMPOSITE or BASEBAND.
This type of connection provides standard picture
•
quality.
Route audio to other devices
You can route the audio from this product to other
devices.
AUDIO IN
VIDEO IN
English
EN

10
1Connect the audio cables to:
the• AUDIO L/R-LINE OUT jacks on this
product.
the AUDIO input jacks on the device.•
Connect USB device
1Connect a USB device to the (USB) jack
on this product.
Note
This product can only play/view MP3, WMA/WMV9,•
DivX (Ultra) or JPEG files that are stored on such
devices.
Press
• , select [USB] in the menu to access the content
and play the files.
Connect a USB device only to the
• jack on this
product.
Philips does not guarantee 100% compatibility with all
•
USB devices.
Connect network
Connect this product to the network to enjoy
software updates and BD-Live bonus content.
1Connect the network cable (not supplied) to:
the• LAN jack on this product.
the LAN jack on the broadband modem•
or router.
Note
Internet access to Philips website for software update•
may not be allowed, depending on the router you use
or the Internet Service Provider’s policy. Contact your
Internet Service Provider for more information.
Tip
To connect 5.1-channel AV receiver/amplifier, do not•
connect the SURROUND L/R jacks.
You can optimize the speaker output (see “Adjust
•
settings” > [Audio Setup] > [Speaker Setup]).
Connect to digital AV receiver/amplifier
Connect to coaxial jack
1Connect a coaxial cable (not supplied) to:
the• COAXIAL jack on this product.
the COAXIAL/DIGITAL input jack on•
the device.
Connect to optical jack
1Connect an optical cable (not supplied) to:
the• OPTICAL jack on this product.
the OPTICAL/DIGITAL input jack on the device.•
Connect analogue stereo system
COAXIAL
COAXIAL
OPTICAL
OPTICAL
AUDIO IN
EN