Philips CAM110BL User manual

CAM110
Register your product and get support at
www.philips.com/welcome
EN User manual

3EN
Contents
1 Important 4
Safety 4
Notice 4
2 Your camcorder 5
Introduction 5
What’s in the box 5
Functional overview 6
3 Get started 7
Load the Micro SD card 7
Turn on 7
First-time setup 8
Charge the built-in battery 8
4 Use your camcorder 9
Record video 9
Take pictures 9
Play 10
Options during video play 11
Adjust settings 11
5 Use more of your camcorder 12
View video or pictures on TV 12
Install and use the camcorder software 12
6 Technicalspecications 13
7 Frequently asked questions (FAQ) 14

4
Notice
This product complies with the radio
interference requirements of the European
Community.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC.
Please inform yourself about the local
separate collection system for electrical and
electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment
and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
negative consequences for the environmental
and human health.
1 Important
Safety
aRead these instructions.
bKeep these instructions.
cHeed all warnings.
dFollow all instructions.
eDo not use this apparatus near water.
fClean only with dry cloth.
gDo not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
hDo not install near any heat sources
such as radiators, heat registers, stoves,
orotherapparatus(includingampliers)
that produce heat.
iOnly use attachments/accessories
speciedbythemanufacturer.
j Referallservicingtoqualiedservice
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
kApparatus shall not be exposed to
dripping or splashing.
lDo not place any sources of danger on
theapparatus(e.g.liquidlledobjects,
lighted candles).
Any changes or modications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
EN

5
2 Your camcorder
Introduction
With this portable camcorder, you can:
take full HD (1080P) or VGA movies•
take pictures•
play recorded movies or pictures either•
directly or on the large screen of a
connected TV
upload the recorded movies or pictures•
to the Internet directly via your PC/Mac
What’s in the box
Make sure that the following items are packed
in the box:
Camcorder•
Quick start guide•
Pouch•
Hand strap•
Note
The safety logo and power rating information are•
located at the USB arm of the camcorder.
Always bring your product to a professional to
remove the built-in battery.
EN

6
Navigate up/down in a menu.•
Change a value in the settings menu.•
During video play, change the•
volume.
Perform the specic function as •
shown on the display panel.
eShutter button
In viewnder mode, take a picture or •
start/stop video recording.
In play mode, switch to viewnder •
mode.
fUSB connector
g
Eject the USB connector.•
hTripod socket
iHand strap hole
Functional overview
aDisplay panel
b
In viewnder mode, switch to play •
mode.
In play mode, play a selected video•
clip.
Conrm settings.•
c/
Navigate left/right in a menu.•
Select a menu option.•
In play mode, turn to the previous/•
next picture/video clip.
(• ) In viewnder mode, switch to
the scene selection window.
(• ) In viewnder mode, switch to
the settings menu.
d+/-
In viewnder mode, zoom in/out.•
a
b
c
d
e
f
g
h
ij kl mn
o
p
q
r
EN

7
3 Get started
Load the Micro SD card
1Flap open the protective cover on the
Micro SD card socket.
2Insert a Micro SD card (not supplied) into
the socket.
Make sure that the the Micro SD•
card is not write-protected.
Make sure that the metal contact of•
the card faces down.
3Close the protective cover securely.
Turn on
Press• .
For rst-time users, a menu for OSD »
language selection is displayed (See
‘’Get started - Set the OSD language).
The camcorder switches to»
viewnder mode.
jHDMI
Connect to a TV through an HDMI•
cable with a mini HDMI connector
(type C).
kMICRO SD
Connect a Micro SD card.•
lRESET
Restore default settings.•
m
Turn on/off the camcorder.•
nMode switch button
Switch between picture and video•
recording modes.
oBuilt-in speaker
pBuilt-in microphones
qFlashlight
rLens
EN

8
Tip
See ‘Use your camcorder - Adjust settings’ for more•
settings.
Select a scene
1 In viewnder mode, press to enter the
window for scene selection.
2Press +/- to select a scene.
3Press to conrm and go back to
viewnder mode.
Or press• to cancel and go back to
viewnder mode.
Charge the built-in battery
1Press at the bottom of the camcorder
to eject the USB connector.
2Connect the USB connector to a USB
socket on a PC.
The status indicator on the shutter»
button starts ashing in orange.
3Wait until the status indicator stops
ashing and turns to green steadily.
The built-in battery is fully charged.»
Tip
The camcorder is fully charged for rst-time use. •
It takes about 3 hours to fully charge the built-in•
battery via the PC.
To turn off the camcorder:
Press and hold• .
The backlight on the display panel»
turns off.
Tip
To save energy, the camcorder turns off•
automatically after being idle for 3 minutes.
First-time setup
When you turn on the camcorder for the rst
time, a menu for OSD language selection is
displayed.
1Press +/- to select a language.
2Press to conrm.
A welcome message is displayed»
briey.
An inquiry box for date and time»
setting is displayed.
3Press to highlight [Yes].
A date setting menu is displayed.»
4Press / to select the day, month and
year elds successively.
5Press +/- to change the value of each
eld.
6Press to conrm the date setting.
A time setting menu is displayed.»
7Press / to select the hour and minute
elds successively.
8Press +/- to change the value of each
eld.
9Press to conrm the time setting.
The rst-time setup is complete.»
The camcorder enters viewnder »
mode.
EN

9
4 Use your
camcorder
Record video
1Switch the mode switch button to .
The selected resolution and»
remaining recording time are
displayed on the display panel.
2Hold the camcorder steadily and aim the
lens as needed.
3Press the shutter button to start
recording.
A red time indicator is displayed on»
the display panel.
The status indicator on the shutter»
button starts ashing in red.
4Press the shutter button again to end
recording.
»[Recording saved!] is displayed briey.
Take pictures
1Switch the mode switch button to .
The le size and remaining number »
of pictures that can be taken are
displayed on the display panel.
2Hold the camcorder steadily and aim the
lens as needed.
3Press the shutter button down halfway to
adjust the focus.
4Press the shutter button down
completely to take a picture.
»[Picture saved!] is displayed briey.
You can also charge the camcorder via a USB
adaptor (not supplied) connected to mains
power. The charge time is about 2 hours.
UK
EUR
EN

10
2Press +to enter the edit window.
3Press to enter the trim window.
A bar for video trimming is displayed»
at the top of the window.
4Press to set the starting point you want.
5Press to conrm.
6Press to set the ending point you want.
7Press to conrm.
A video trim menu is displayed.»
8Press +/- to select an option, then press
to conrm.
Menu option Description
[Go back] Go back to the trim window.
[Preview edit] Preview the trimmed video
clip.
[Save as new
le]
Save the trimmed video clip
as a new le.
[Cancel and
exit]
Cancel the trim operation
and exit.
Tagale
1In play mode, press / to select a le.
2Press +to enter the edit window.
3Press - to tag the le.
To untag the le, press • -again.
4 Repeat steps 1 to 3 to tag other les.
Preview
In play mode, press• -.
The thumbnails of 6 les are displayed »
on each page.
To select a le, press »+/-/ / .
Play
1 In viewnder mode, press to enter
play mode.
The last recorded media is played»
automatically.
2Press / to select a picture or video
clip for play.
3 If the selected le is a video clip, press
to start play.
Deleteale
1In play mode, press / to select a le.
2Press +to enter the edit window.
3Press +again to enter the window for
deletion conrmation.
4Press to highlight [Yes] and conrm the
deletion operation.
»[Deleted!] is displayed briey.
To exit the operation, press»to
highlight [No].
Zoom in a picture
1In play mode, press / to select a
picture.
2Press +to enter the edit window.
3Press to zoom in the picture.
4Press +/-/ / to pan through the
enlarged picture.
To return to normal view, press• .
Trim a video clip
Note
Only video les not recorded with ‘Dual recording’ •
can be edited (trimmed) on the camcorder.
1In play mode, press / to select a
recorded video clip.
EN