manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Pittsburgh Automotive
  6. •
  7. Water Pump
  8. •
  9. Pittsburgh Automotive 56816 Assembly instructions

Pittsburgh Automotive 56816 Assembly instructions

Visit our website at: http://www.harborfreight.com
Email our technical support at: [email protected]
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 19h
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2011 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
To ols required for assembly and se rv ic e m ay n ot b e i nc lu de d .
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Page 2 For technical questions, please call 1-888-866-5797. Item 56816
Specifications
Inlet Size 1 1/4 IN. NPT
Outlet Pipe 1 IN.
Dimensions 50 IN. Height
Important Safety Information
1. This product is not a toy.
Do not allow children to play
with or near this item.
2. Do not use with gasoline, kerosene,
acids, alkaline solutions, trichlene,
perclene, paint thinner, etc.
3. Do not pump used, dirty oil
or fluids in this pump.
4. Do not use to pump water.
5. Keep work area clean.
Cluttered areas invite injuries.
6. Keep Barrel Pump and fluids
away from all ignition sources
and flammable materials.
7. Observe work area conditions.
Do not use the Pump in damp or
wet locations. Don’t expose to rain.
Keep work area well lighted.
8. Assemble and use only according
to these instructions.
9. Wear ANSI-approved safety
goggles during assembly and use.
10. Do not assemble or use when
tired or when under the influence
of drugs or medication.
11. Use as intended only.
12. Inspect before every use; do not
use if parts are loose or damaged.
13. Maintain product labels and
nameplates. These carry
important safety information.
If unreadable or missing,
contact Harbor Freight Tools
for a replacement.
Page 3For technical questions, please call 1-888-866-5797.Item 56816
Assembly & Operation Instructions
Suction
Pipe
Pump Body
Barrel
Bung Nut
Handle
Delivery
Spout
Threaded
Outlet
Assembly
1. Insert the Suction Pipe
into the Barrel.
2. Slide the Bung Nut over the Suction
Pipe. Use the Bolt to tighten the
Barrel in place on the Suction Pipe.
3. Screw the Pump Body onto
the top of the Suction Pipe.
4. Slide the Handle onto the shaft
on the Pump Body. Tighten
together using the hex bolt.
5. Screw the Delivery Spout
onto the Threaded Outlet on
top of the Pump Body.
Operation
1. Assemble the Pump as
described above.
2. To prime the Pump, turn the
Discharge Spout upwards and
pour in a few drop of oil.
3. Attach the Hose to the end of
the Deliver Spout (if needed).
Then put a container under the
Delivery Spout or hose end.
4. Completely submerge the
lower half of the Suction Pipe
into the fluid to transfer.
5. Pump the Handle steadily to
begin the liquid transfer.
6. Pump until the discharge container
is full or the Pump runs dry.
7. Remove the Pump and wipe it dry.
Note: If the drum has water or
other residue on the bottom, try
to avoid running them through the
Pump. Raise the lower part of the
Suction Pipe above the residue.
26541 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797
Maintenance Instructions
Procedures not specifically
explained in this manual
must be performed only by
a qualified technician.
TO PREVENT SERIOUS INJURY
FROM ACCIDENTAL OPERATION:
Do not use damaged equipment.
If abnormal noise or operation
occurs, have the problem
corrected before further use.
1. Before each use, inspect the
general condition of the Pump.
Check for broken or bent parts,
loose or missing parts, and any
condition that may affect the proper
operation of the product. If a
problem occurs, have the problem
corrected before further use.
2. Periodically, use a light lubricant
on the Handle’s pivot parts.
3. Keep the suction and delivery
ports free of dirt and debris.
4. After each use, wipe off the
unit. Store in a clean dry place
out of reach of children.
Note: Replacement parts are
not available for this item.
Record Serial Number Here:
Note: If product has no serial
number, record month and
year of purchase instead.

Other Pittsburgh Automotive Water Pump manuals

Pittsburgh Automotive 92474 User manual

Pittsburgh Automotive

Pittsburgh Automotive 92474 User manual

Pittsburgh Automotive 63682 Assembly instructions

Pittsburgh Automotive

Pittsburgh Automotive 63682 Assembly instructions

Pittsburgh Automotive 63391 Assembly instructions

Pittsburgh Automotive

Pittsburgh Automotive 63391 Assembly instructions

Pittsburgh Automotive 63144 User manual

Pittsburgh Automotive

Pittsburgh Automotive 63144 User manual

Popular Water Pump manuals by other brands

SKF Lincoln HTL 201 installation instructions

SKF

SKF Lincoln HTL 201 installation instructions

Wilo Rexa UNI Installation and operating instructions

Wilo

Wilo Rexa UNI Installation and operating instructions

Kamoer DIPump-KK300 V2 user manual

Kamoer

Kamoer DIPump-KK300 V2 user manual

MSW MSW-BRM-11 user manual

MSW

MSW MSW-BRM-11 user manual

NovaTec SVP-3 instruction manual

NovaTec

NovaTec SVP-3 instruction manual

Aquatec PONDMAX PU3500 instruction manual

Aquatec

Aquatec PONDMAX PU3500 instruction manual

LUBE EGM-50TH-20N instruction manual

LUBE

LUBE EGM-50TH-20N instruction manual

Aquascape Pro AquaSurge PRO 4000-8000 Instructions & maintenance

Aquascape Pro

Aquascape Pro AquaSurge PRO 4000-8000 Instructions & maintenance

BUSCH R5 KB 0020 D instruction manual

BUSCH

BUSCH R5 KB 0020 D instruction manual

Toshiba TCB-DP31DE installation manual

Toshiba

Toshiba TCB-DP31DE installation manual

STI SC/Vo instruction manual

STI

STI SC/Vo instruction manual

Wolf ZP-3 installation instructions

Wolf

Wolf ZP-3 installation instructions

SAER Elettropompe CB Series Use and maintenance manual

SAER Elettropompe

SAER Elettropompe CB Series Use and maintenance manual

Coleman QUICKPUMP Instructions for use

Coleman

Coleman QUICKPUMP Instructions for use

KSB ITUR IFV-32 instruction manual

KSB

KSB ITUR IFV-32 instruction manual

Ulvac GLD-051 instruction manual

Ulvac

Ulvac GLD-051 instruction manual

BLACKMER V Series Installation, operation and maintenance instructions

BLACKMER

BLACKMER V Series Installation, operation and maintenance instructions

Sensidyne Gilian 5000 Basic Manual

Sensidyne

Sensidyne Gilian 5000 Basic Manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.