manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Pivotell
  6. •
  7. Watch
  8. •
  9. Pivotell Vibratime User manual

Pivotell Vibratime User manual

Vibratime
8 Alarm vibrating watch
1
Introduction
A possible 8 silent vibrating alarms can be set as
convenient & discrete reminders to help adults
and children remember to do something during
the day or night.
There are two programming buttons which can
be felt on the side of the strap.
To check the time: Press the right button once.
The time will appear on the screen.
To check the battery level: Press the right button
twice. The battery level percentage will appear.
(If the battery is below 20% the watch will turn off
to save the alarm settings).
To review all alarms: repeatedly press the left
button. The alarm number is followed by the
alarm time. LED will show: A1OF, 08.08, A2OF,
09.00, A3OF, 10.00 & so on, for all 8 alarms.
2
At an alarm time the watch vibrates and time is
displayed. Alarm 1 vibrates for 40 seconds (wake
-up alarm). Alarms 2-8 vibrate for 20 seconds.
When the watch alarm vibrates you can press
either button to stop the alert.
When setting the watch, press and hold the
appropriate button for 3 seconds to enter the
setting. A short press adjusts the number.
Practice with the settings initially as it takes a little
while to get used to them. The LED turns off
quickly (exiting the setting) if you are not prompt
when pressing the buttons.
If nothing is pressed the watch will exit setting
after 4 seconds.
Watches are supplied with factory set demo
alarm times. Adjust the alarms to suit your needs.
3
Setting the Time
1, Press the right button once - the 24 hour clock
will appear.
2, With the LED still on press the right button again
and hold for 3 seconds to set the hours.
4, The hours will appear alone on the left (central
dots will be blinking).
5, With the LED still on press the press the left
button to increase, the right button to decrease.
6, When the hour is correct and with the LED still
on press the right button for 3 seconds to set the
minutes.
7, The minutes will appear alone on the right
(central dots will be blinking).
4
8, With the LED still on press the left button to
increase, the right button to decrease.
When the minutes are correct - time setting is
complete.
If nothing is pressed the watch will exit setting
after 4 seconds.
5
Setting the Alarms
1, Turn alarms on/off.
Alarm 1: Press the left button once. With A1OF
(Alarm 1 OFF) or A1ON (Alarm 1 ON) displayed,
press the right button once to turn ON or OFF.
2, Set the alarm time.
Alarm 1: With A1ON displayed press the left
button once to see the alarm time on the LCD.
A, Then press the left button for 3 seconds to
enter the setting and adjust the hours. The hours
will appear on the left side.
B, Press the left button to increase, the right
button to decrease.
6
C, Once at the correct hour, press the left button
for 3 seconds to adjust the minutes. The minutes
will appear on the right side.
D, Press the left button to increase, the right
button to decrease. When the minutes are
correct, alarm 1 is set.
Now program any further alarms required (2-8):
To turn an alarm on/off ensure the correct alarm
is displayed by pressing the left button until it is
displayed (ie. A2OF, A3OF, etc.) and press the
right button once to change it to ON or OFF.
Set the times for alarms 2-8: With the correct
alarm displayed (ie. A2ON, A3ON, etc.) press the
left button once to see that alarm time on the
LED. Then follow instructions ABCD above.
7
Recharging
Remove the watch from the rubber casing and
charge the watch using the USB cable provided.
The watch charges in approximately 1 hour.
When replacing the watch in the rubber casing
ensure that the watch buttons are correctly
positioned in the strap under the rubber buttons.
Battery life
Battery life between charging: appx 6 days,
although this will depend on the number of
alarms set & length of time the vibrations are
allowed to run / frequency LED light is on. At 20%
or less the LED will display _ _:00 after the time as
a reminder to recharge.
We recommend that the Vibratime is not
recharged every day unless necessary.
8
The Vibratime is not waterproof: do not wear in
shower/bath or when swimming.
Warranty: 12 months from purchase.
Other interchangeable strap colours also
available:
Pivotell Ltd. PO Box 108, Saron Walden, Essex, CB11 4WX, 01799 550979

Popular Watch manuals by other brands

Glam Rock GK1003 instruction manual

Glam Rock

Glam Rock GK1003 instruction manual

Jaeger-leCoultre Master Ultra Thin Date manual

Jaeger-leCoultre

Jaeger-leCoultre Master Ultra Thin Date manual

SLIDE SW375 user manual

SLIDE

SLIDE SW375 user manual

WOWME GT01 user manual

WOWME

WOWME GT01 user manual

Seiko H249 manual

Seiko

Seiko H249 manual

Storm HY2 Product user manual

Storm

Storm HY2 Product user manual

Casio Baby-G BG1500A-1B Operation guide

Casio

Casio Baby-G BG1500A-1B Operation guide

Suunto D9tx user guide

Suunto

Suunto D9tx user guide

MyKronoz ZeRound 2 quick start guide

MyKronoz

MyKronoz ZeRound 2 quick start guide

Citizen YF20 instruction manual

Citizen

Citizen YF20 instruction manual

Piaget 838D manual

Piaget

Piaget 838D manual

BVItech BV-Q-17 instruction manual

BVItech

BVItech BV-Q-17 instruction manual

Casio 5262 Operation guide

Casio

Casio 5262 Operation guide

Cactus KidoPlay user manual

Cactus

Cactus KidoPlay user manual

eta G10.212 PRD Technical Communication

eta

eta G10.212 PRD Technical Communication

Citizen 6P89 instruction manual

Citizen

Citizen 6P89 instruction manual

Patek Philippe 324 S QA LU manual

Patek Philippe

Patek Philippe 324 S QA LU manual

Casio G-2400 Service manual & parts list

Casio

Casio G-2400 Service manual & parts list

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.