PJLink CP-X4022WN User manual

1
Projector
CP-X4022WN/CP-X5022WN/
CP-WX4022WN
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
►Before using this product, please read all manuals for this
product. Be sure to read Safety Guide first. After reading them, store them in a
safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The illustrations in this manual are for illustrative purposes. They may differ
slightly from your projector.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
Various symbols are used in this manual. The meanings of these symbols are
described below.
About this manual
WARNING
CAUTION
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly result
in personal injury or physical damage due to incorrect handling.
Please refer to the pages written following this symbol.

• Mac®is a registered trademark of Apple Inc.
• Windows®, DirectDraw®and Direct3D®are registered trademarks of Microsoft Corporation
in the U.S. and/or other countries.
• VESA and DDC are trademarks of the Video Electronics Standard Association.
•
HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
• Trademark PJLink is a trademark applied for trademark rights in
Japan, the United States of America and other countries and areas.
• Blu-ray DiscTM and Blu-rayTM are trademarks of Blu-ray Disc Association.
• DICOM®is the registered trademark of the National Electrical Manufacturers Association
for its standards publications relating to digital communications of medical information.
All other trademarks are the properties of their respective owners.
NOTICE This entry notices of fear of causing trouble.

2
Contents
Introduction ...............3
Features . .....................3
Checking the contents of package ...3
Part names . ...................4
Setting up . ................7
Arrangement ...................7
Connecting with your devices
.....10
Connecting to a power supply
.....15
Fastening the adapter cover ......
16
Using the security bar and slot . . . . 16
Remote control ............17
Installing the batteries...........17
About the remote control signal . . . 18
Using as a simple PC mouse & keyboard . . 19
Power on/off . .............20
Turning on the power . ..........20
Turning off the power . ..........21
Operating . ...............22
Adjusting the volume............22
Temporarily muting the sound.....22
Selecting an input signal.........23
Searching an input signal . .......24
Selecting an aspect ratio.........25
Adjusting the projector's elevator . . 26
Adjusting the lens . .............27
Using the automatic adjustment feature ...28
Adjusting the position . ..........28
Correcting the distortion ..........29
Using the magnify feature........32
Temporarily freezing the screen . . . 33
Temporarily blanking the screen . . 33
Using the menu function . .......34
EASY MENU. . . . . . . . . . . . . . . 36
ASPECT, AUTO KEYSTONE, K EYSTONE
,
KEYSTONE, PERFECT FIT, PICTURE MODE,
ECO MODE, INSTALLATION, RESET, FILTER TIME,
LANGUAGE, ADVANCED MENU, EXIT
PICTURE menu . ...........38
BRIGHTNESS, CONTRAST, GAMMA, COLOR TEMP,
COLOR, TINT, SHARPNESS, ACTIVE IRIS, MYMEMORY
IMAGE menu . .............41
ASPECT, OVER SCAN, V POSITION, H POSITION,
H PHASE, H SIZE, AUTO ADJUST EXECUTE
INPUT menu . .............44
PROGRESSIVE, VIDEO NR, COLOR SPACE,
COMPONENT, VIDEO FORMAT, HDMI FORMAT,
HDMI RANGE, COMPUTER IN, FRAME LOCK,
RESOLUTION

SETUP menu ..............48
AUTO KEYSTONE, K EYSTONE, KEYSTONE,
PERFECT FIT, AUTO ECO MODE, ECO MODE,
INSTALLATION, STANDBY MODE, MONITOR OUT
AUDIO menu . .............52
VOLUME, SPEAKER, AUDIO SOURCE,
MIC LEVEL, MIC VOLUME
SCREEN menu.............53
LANGUAGE, MENU POSITION, BLANK,
AUTO BLANK, START UP,
MyScreen,
MyScreen Lock
, MESSAGE, SOURCE NAME,
TEMPLATE, C.C.
OPTION menu . ............59
AUTO SEARCH, AUTO KEYSTONE,
DIRECT POWER ON, AUTO POWER OFF,
USB TYPE B, LAMP TIME, FILTER TIME,
MYBUTTON, MYSOURCE, SERVICE
NETWORK menu ...........71
WIRELESS SETUP, WIRELESS INFORMATION,
WIRED SETUP, WIRED INFORMATION,
PROJECTOR NAME, MYIMAGE, AMX D.D.,
PRESENTATION, SERVICE
SECURITY menu ...........82
SECURITY PASSWORD CHANGE,
MyScreen
PASSWORD, PIN LOCK,
TRANSITION DETECTOR, MYTEXT PASSWORD,
MYTEXT DISPLAY, MYTEXT WRITING,
SECURITY INDICATOR, STACK LOCK,
CLONING LOCK
Presentation tools . ........89
PC-LESS Presentation ...........89
USB Display (Windows computer)
......
99
USB Display
(Mac computer)
.......
103
Maintenance .............107
Replacing the lamp ............107
Cleaning and replacing the air filter . 109
Other care................... 111
Troubleshooting . .........112
Related messages . ........... 112
Regarding the indicator lamps . . . 114
Resetting all settings........... 117
Phenomena that may be easy
to be mistaken for machine defects .. 117
Specifications ............122


3
Introduction
Introduction
• Keep the original packing materials, for future reshipment. Be sure
to use the original packing materials when moving the projector. Use special
caution for the lens.
• The projector may make a rattling sound when tilted, moved or shaken, since
a flap to control the air flow inside of the projector has moved. Be aware that
this is not a failure or malfunction.
Features
The projector provides you with the broad use by the following features.
This projector has a variety of I/O ports that supposedly cover for any
business scene. The HDMI port can support various image equipment which
have digital interface to get clearer pictures on a screen.
If you insert a USB storage device, such as a USB memory, into the USB
TYPE A port and select the port as the input source, you can view images
stored in the device.
This projector can be controlled and monitored via LAN connection.
Furthermore, you can use the designated USB wireless adapter (optional) to
establish wireless LAN connection.
This projector has a 1.7 times optical zoom, horizontal and vertical manual
lens shift, allowing flexible installation.
The double layer filter system is expected to function longer and offers you
less maintenance frequency.
The built-in 16W speaker can deliver sufficient sound volume in a large space
like a classroom without external speakers.
Checking the contents of package
Please see the Contents of package section in the User’s Manual (concise)
which is a book. Your projector should come with the items shown there. Require
of your dealer immediately if any items are missing.
►Keep small parts away from children and pets. Take care
not to put in the mouth. If swallowed, consult a physician immediately for
emergency treatment.
WARNING
NOTE

4
Introduction
Part names
Projector
(1) Lamp cover (107)
The lamp unit is inside.
(2) Speakers (x2) (22, 52)
(3) Filter cover (109)
The air filter and intake vent are inside.
(4) Elevator feet (x2) (26)
(5) Elevator buttons (x2) (26)
(6) Remote sensor (18)
(7) Lens (111)
(8) Lens cover
(9) Pocket caps
(10) Intake vents
(11) Control panel (5)
(12) Lens adjuster door (5)
The adjusters for the lens are behind
the door.
(13) AC IN (AC inlet) (15)
(14) Exhaust vent
(15) Rear panel (5)
(16) Security bar (16)
(17) Heel
►Do not open or remove any portion of the product, unless the
manuals direct it.
►Do not subject the projector to unstable conditions.
►Do not apply a shock or pressure to this product.
►Do not look into the lens and the openings on the projector while the lamp is
on.
►Keep the pocket caps away from children and pets. Make sure they do not
swallow the caps. If swallowed consult a physician immediately for emergency
treatment.
WARNING
►Do not touch around the lamp cover and the exhaust
vents during use or just after use, since it is too hot.
►Do not attach anything onto the lens except the lens cover of this
projector because it could damage the lens, such as melting the lens.
CAUTION
(continued on next page)

5
Introduction
Part names (continued)
Control panel and Lens adjusters
.1%-
(1) Lens adjuster door
(2) FOCUS ring (27)
(3) ZOOM ring (27)
(4) HORIZONTAL (horizontal) adjuster (27)
(5) VERTICAL (vertical) adjuster (27)
(6) LOCK (horizontal lens position lock) (27)
(7) STANDBY/ON button (20)
(8) INPUT button (23)
(9) MENU button (34)
(10) SECURITY indicator (88)
(11) LAMP indicator (114)
(12) TEMP indicator (114)
(13) POWER indicator (114)
(14) Cap storage pockets
Rear panel (10 ~ 14)
(1) LAN port
(2) USB TYPE A port (x2)
(3) HDMI port
(4) USB TYPE B port
(5) MIC port (14)
(6) AUDIO IN1 port
(7) AUDIO IN2 port
(8) AUDIO IN3 (R,L) ports
(9) AUDIO OUT (R,L) ports
(10) COMPUTER IN1 port
(11) COMPUTER IN2 ports (11)
(G/Y, B/Cb/Pb, R/Cr/Pr, H, V)
(12) REMOTE CONTROL port
(13) MONITOR OUT port
(14) CONTROL port
(15) COMPONENT ports (Y,Cb/Pb, Cr/Pr)
(16) VIDEO port
(17) S-VIDEO ports
(18) Security slot (16)
(continued on next page)

6
Introduction
Part names (continued)
Remote control
(1) VIDEO button (23)
(2) COMPUTER button (23)
(3) SEARCH button (24)
(4) STANDBY/ON button (20)
(5) ASPECT button (25)
(6) AUTO button (28)
(7) BLANK button (33)
(8) MAGNIFY - ON button (32)
(9) MAGNIFY - OFF button (32)
(10) MY SOURCE/DOC.CAMERA button
(24, 63)
(11) VOLUME - button (22)
(12) PAGE UP button (19)
(13) PAGE DOWN button (19)
(14) VOLUME +button (22)
(15) MUTE button (22)
(16) FREEZE button (33)
(17) MY BUTTON - 1button (62, 63)
(18) MY BUTTON - 2button (62, 63)
(19) KEYSTONE button (29)
(20) POSITION button (28, 34)
(21) MENU button (34)
(22) ▲/▼/◄/► cursor buttons (34)
(23) ENTER button (34)
(24) ESC button (34)
(25) RESET button (34)
(26) Battery cover (17)
Back of
the remote control
(2)
(1)
(6)
(5)
(16)
(8)
(9)
(19)
(17)
(20)
(22)
(24)
(10)
(4)
(3)
(7)
(12)
(14)
(11)
(13)
(15)
(18)
(21)
(23)
(25)
(26)
VIDEO
DOC.CAMERA
KEYSTONE
ASPECT SEARCH BLANK
MUTE
MY BUTTON
POSITION
ESC
MENU
RESET
COMPUTER MY SOURCE/
AUTO
MAGNIFY PAGE
DOWN
ON
OFF
FREEZE
UP
࡯
㧗
VOLUME

ENTER

7
Setting up
Setting up
Install the projector according to the environment and manner the projector will be
used in.
For the case of installation in a special state such as ceiling mount, the specified
mounting accessories (Specifications in the User’s Manual (concise)) and
service may be required. Before installing the projector, consult your dealer about
your installation.
Arrangement
Refer to tables T-1 and T-2 at the back of User's Manual (concise) as well as the
following to determine the screen size and projection distance.
Ⓗ×Ⓥ : Screen size
ⓐ:
Projection distance
(from the projector's end)
ⓑ,ⓒ: Screen height, when the vertical lens shift is set full upward. (27)
(continued on next page)
Projector top
Projector bottom

8
Setting up
Arrangement (continued)
WARNING
(continued on next page)
►Install the projector where you can access the power
outlet easily. If an abnormality should occur, unplug the projector urgently.
Otherwise it could cause a fire or electric shock.
►Do not subject the projector to unstable conditions. If the projector falls
or topples over, it could result in injury or damage to the projector and the
surrounding things. Using a damaged projector could result in a fire and an
electric shock.
• Do not place the projector in unstable places, such as an inclined surface,
places subject to vibration, on top of a wobbly table or cart, or a surface that is
smaller than the projector.
• Do not put the projector on its side, front or rear position.
• Do not attach nor place anything on the projector unless otherwise specified in
the manual.
• Do not use any mounting accessories except the accessories specified by the
manufacturer. Read and keep the manuals of the accessories used.
• For special installation such as ceiling mounting, be sure to consult your dealer
beforehand.
►
Do not install the projector near thermally conductive or flammable
things. Such things when heated by the projector could result in a fire and burns.
• Do not place the projector on a metal stand.
►Do not place the projector where any oils, such as cooking or machine
oil, are used. Oil may harm the product, resulting in malfunction, or falling from
the mounted position.
►Do not place the projector in a place where it may get wet. Getting the
projector wet or inserting liquid into the projector could cause a fire and an
electric shock, and damage the projector.
• Do not place the projector near water, such as in a bathroom, kitchen, or
poolside.
• Do not place the projector outdoors or by the window.
• Do not place anything containing liquid near the projector.

9
Setting up
Arrangement (continued)
►Place the projector in a cool place with sufficient
ventilation. The projector may shutdown automatically or may malfunction if its
internal temperature is too high.
Using a damaged projector could result in a fire and an electric shock.
• Do not place the projector in direct sunlight or near hot objects such as heaters.
• Do not place the projector where the air from an air conditioner or similar unit
will blow on it directly.
• Keep a space of 30 cm or more between a side of the projector and other
objects such as walls.
• Do not place the projector on carpet, cushions or bedding.
• Do not stop up, block nor cover the projector's vent holes. Do not place
anything around the projector that could be sucked in or stuck to the projector's
intake vents.
• Do not place the projector at places that are exposed to magnetic fields, doing
so can cause the cooling fans inside the projector to malfunction.
►Avoid placing the projector in smoky, humid or dusty place. Placing the
projector in such places could cause a fire, an electric shock and malfunction of
the projector.
• Do not place the projector near humidifiers. Especially for an ultrasonic
humidifier, chlorine and minerals contained in tap water are atomized and could
be deposited in the projector causing image degradation or other problems.
• Do not place the projector in a smoking area, kitchen, passageway or by the
window.
• Position the projector to prevent light from directly hitting the
projector's remote sensor.
• Do not place the product in a place where radio interference may be caused.
• Check and correct the setting for ALTITUDE of SERVICE in the OPTION menu
according to the usage environment (63). If the projector is used with a wrong
setting, it may cause damage to the projector itself or the parts inside.
• Keep heat-sensitive things away from the projector. Otherwise, they may be
damaged by the heat from the projector.
CAUTION
NOTICE
• When the ambient temperature is high, the rotational speed of the
cooling fan may increase automatically. In that case, the fan may be noisier
without failure or malfunction.
NOTE

10
Setting up
Connecting with your devices
Before connecting the projector to a device, consult the manual of the device to
confirm that the device is suitable for connecting with this projector and prepare
the required accessories, such as a cable in accord with the signal of the device.
Consult your dealer when the required accessory did not come with the product or
the accessory is damaged.
After making sure that the projector and the devices are turned off, perform
the connection, according to the following instructions. Refer to the figures in
subsequent pages.
Before connecting the projector to a network system, be sure to read Network
Guide too.
►Use only the appropriate accessories. Otherwise it could
cause a fire or damage the projector and devices.
• Use only the accessories specified or recommended by the projector’s
manufacturer. It may be regulated under some standard.
• Neither disassemble nor modify the projector and the accessories.
• Do not use the damaged accessory. Be careful not to damage the accessories.
Route a cable so that it is neither stepped on nor pinched out.
WARNING
►For a cable with a core at only one end, connect the end
with the core to the projector. That may be required by EMI regulations.
CAUTION
• Plug-and-Play is a system composed of a computer, its operating system
and peripheral equipment (i.e. display devices). This projector is VESA DDC
2B compatible. Plug-and-Play can be used by connecting this projector to a
computer that is VESA DDC (display data channel) compatible.
- Take advantage of this feature by connecting a computer cable to the
COMPUTER IN1 port (DDC 2B compatible). Plug-and-Play may not work
properly if any other type of connection is attempted.
- Please use the standard drivers in your computer as this projector is a Plug-
and-Play monitor.
• Do not turn on or off the projector while connected to a device in
operation, unless that is directed in the manual of the device. Otherwise it may
cause malfunction in the device or projector.
• The function of some input ports can be selected according to your usage
requirements. Check the reference page indicated beside each port in the
following illustration.
• Be careful not to mistakenly connect a connector to a wrong port. Otherwise it
may cause malfunction in the device or projector.
- When connecting a connector to a port, make sure that the shape of the
connector fits the port.
- Tighten the screws to connect a connector equipped with screws to a port.
- Use the cables with straight plugs, not L-shaped ones, as the input ports of
the projector are recessed.
About Plug-and-Play capability
NOTE
(continued on next page)