PLAYGROUND EQUIPMENT Poseidon's Hideout PFS013 User manual

Poseidon's Hideout Packing List and Install Guide
Page 1
PFS013 Poseidon's Hideout
No. Item Image QTY Hardware
1 Climber Section (half) 2
2 ount 4
Install Guide
1
2
3.5 in 10 Bolt: 12
Lock Nut:12
Washer: 24
Bolt Cover: 12
17mm Wrench: 1
10 Security Bolt: 12
Washer: 12 Security
Wrench: 1
First, both halves of the climber must be
connected. The hardware kit includes 12
3.5 inch bolts which are inserted through
both sides. Place the plastic bolt cover
over the end and secure in place with the
washer and lock nut. Finally, slide the cap
for the bolt cover into place.
Next, install the ounts. Place mounting
plate against the circular indents on the
bottom of the climber. Then, fasten using
washers and the security bolts.

Poseidon's Hideout Packing List and Install Guide
Page 2
3
Standing Climber upright, mark ground for
footer locations. Dig footers to the
appropriate depth to have the bottom of
the climber touching the top of the safety
surfacing (Depth of footer depends on
amount of surfacing material being used).
Pour concrete into footer holes to secure
climber into place. Follow guidelines from
the concrete manufacturer for amount /
time of curing, etc.