Playcraft 1206 User manual

IMPORTANT NOTES: Read First
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or 541.955.9199 (International)
ADA STEPS w/ WALLS
INSTALLATION INSTRUCTIONS
Rev K
12/27/2018
1206
Page 1 of 4
Figures 1.1 & 1.2
See Installation Manual Sections
09 Collars and 11 Clamps
Figure 1.3
(A) Use liquid thread lock (such as Loctite
®
) with all threaded hardware. Important: Liquid thread lock (prior to
curing) helps to eliminate the common problem of "thread seizure" in stainless steel hardware by serving as a
lubricant during assembly.
(B) Refer to Installation Manual for 09 Collars and 11 Socket Clamps installation instructions.
(C) An appropriate energy absorbing safety surface is required under and around all playground equipment.
Loose fill protective surfacing is shown only as an example for the purpose of this assembly instruction. Other
surfacing material may vary in thickness and/or compression depths. See free publication - The Handbook for
Public Playground Safety, Publication #325 at www.cpsc.gov for the surfacing appropriate for the fall height of
the equipment or consult your surfacing supply representative.
NOTE : R5 24" configuration shown.
Other configurations will vary slightly,
but does not affect the assembly.
FIGURE 1
24" ADA Steps w/
Walls

www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or 541.955.9199 (International)
ADA STEPS w/ WALLS
INSTALLATION INSTRUCTIONS
Rev K
12/27/2018
1206
Page 2 of 4
ADA STEPS
3/8" x 1-1/2"
Button Head Bolt
3/8" x 1" O.D.
Washer
3/8" x 1" O.D.
Washer
3/8" Lock Nut
Figure 1.1
Deck
3/8" Lock Nut
3/8" x 1" O.D.
Washer
3/8" x 1-1/4"
Button Head Bolt
3/8" x 1" O.D.
Washer
Figure 1.2
39"
991mm
*
Use Wall To Mark
Collar Height
FIGURE 2
SOCKET CLAMP
BOTTOM
SOCKET CLAMP
TOP
ADA STEPS
WALL
Figure 1.3
Step 1
Attach ADA Steps to lower deck as shown in Figure 1.1.
Repeat for upper deck.
(See Note A)
Step 2
Loosely attach ADA Step Walls to decks as shown
in Figure 1.2. (See Note A)
Step 3
Attach collars at height shown in Figure 2.
(See Note B)
* Height shown from top of deck to top of collar.
Step 4
Attach ADA Step Walls to collars as shown
in Figure 1.3. (See Note B)
Step 5
Fully tighten all fasteners according to the
"TIGHTENING TORQUE FOR HARDWARE"
section of the Installation Manual.
Step 6
Place appropriate compliant protective
surfacing under and around ADA Steps.
(See Note C)

www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or 541.955.9199 (International)
ADA STEPS w/ WALLS
INSTALLATION INSTRUCTIONS
Rev K
12/27/2018
1206
Page 3 of 4
R5-1206-12 - 12" ADA Steps w/ Walls R5
Part # DESCRIPTION QTY.
CE-4335 ADA Step 12-26 1
FS-1206-12R ADA Steps 12-26 Wall Set R5 1
HS-1001-R5 Socket Clamp Set R5 4
9103062-TR Bolt Button Head 3/8" x 1-1/4" 4
9103072-TR Bolt Button Head 3/8" x 1-1/2" 8
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick 24
9413002 Nut Lock 3/8" 12
R5-1206-18 - 18" ADA Steps w/ Walls R5
Part # DESCRIPTION QTY.
CE-4380 ADA Steps 18-26 1
FS-1206-18R ADA Steps 18-26 Wall Set R5 1
HS-1001-R5 Socket Clamp Set R5 4
9103062-TR Bolt Button Head 3/8" x 1-1/4" 4
9103072-TR Bolt Button Head 3/8" x 1-1/2" 8
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick 24
9413002 Nut Lock 3/8" 12
R5-1206-24 - 24" ADA Steps w/ Walls R5
Part # DESCRIPTION QTY.
CE-4203 ADA Steps 24-26 1
FS-1206-24R ADA Steps 24-26 Wall Set R5 1
HS-1001-R5 Socket Clamp Set R5 4
9103062-TR Bolt Button Head 3/8" x 1-1/4" 4
9103072-TR Bolt Button Head 3/8" x 1-1/2" 8
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick 24
9413002 Nut Lock 3/8" 12
R5-1206-36 - 36" ADA Steps w/ Walls R5
Part # DESCRIPTION QTY.
CE-4294 ADA Steps 36-26 1
FS-1206-36R ADA Steps 36-26 Wall Set R5 1
HS-1001-R5 Socket Clamp Set R5 4
9103062-TR Bolt Button Head 3/8" x 1-1/4" 4
9103072-TR Bolt Button Head 3/8" x 1-1/2" 8
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick 24
9413002 Nut Lock 3/8" 12
R5-1206-42 - 42" ADA Steps w/ Walls R5
Part # DESCRIPTION QTY.
CE-0030 ADA Steps 42-26 1
FS-1206-42R ADA Steps 42-26 Wall Set R5 1
HS-1001-R5 Socket Clamp Set R5 4
9103062-TR Bolt Button Head 3/8" x 1-1/4" 4
9103072-TR Bolt Button Head 3/8" x 1-1/2" 8
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick 24
9413002 Nut Lock 3/8" 12
R5-1206-24R45 - ADA Steps w/ Walls 24"H x 45"L R5
Part # DESCRIPTION QTY.
CE-4911 ADA Steps 24-26 1
FS-1206-24R45 ADA Steps 24-26-45 Wall Set 1
HS-1001-R5 Socket Clamp Set R5 4
9103062-TR Bolt Button Head 3/8" x 1-1/4" 4
9103072-TR Bolt Button Head 3/8" x 1-1/2" 8
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick 24
9413002 Nut Lock 3/8" 12
R5-1206-48 - 48" ADA Steps w/ Walls R5
Part # DESCRIPTION
QTY.
FS-1206-48R ADA Steps 48-26 Wall Set R5
1
HS-1001-R5 Socket Clamp Set R5
4
9103062-TR Bolt Button Head 3/8" x 1-1/4"
4
9103072-TR Bolt Button Head 3/8" x 1-1/2"
8
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick
24
9413002 Nut Lock 3/8"
12
CE-4486 ADA Steps 48-26
1
R5-1206-30 - 30" ADA Steps w/ Walls R5
Part # DESCRIPTION QTY.
CE-4194 ADA Steps 30-26 1
FS-1206-30 ADA Steps 30-26 Wall Set R5 1
HS-1001-R5 Socket Clamp Set R5 4
9103062-TR Bolt Button Head 3/8" x 1-1/4" 4
9103072-TR Bolt Button Head 3/8" x 1-1/2" 8
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick 24
9413002 Nut Lock 3/8" 12
R5-1206-24RCRV - 24" Curved Steps w/ Walls R5
Part # DESCRIPTION QTY.
CF-0848 Curved Steps 24" Rise R5 1
FS-1206-24CRVI Curved Steps Inner Wall 24" Rise R5 1
FS-1206-24CRVO Curved Steps Outer Wall 24" Rise R5 1
HS-1001-R5 Socket Clamp Set R5 4
9103062-TR Bolt Button Head 3/8" x 1-1/4" 4
9103072-TR Bolt Button Head 3/8" x 1-1/2" 8
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick 24
9413002 Nut Lock 3/8" 12
R5 Parts List

www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or 541.955.9199 (International)
ADA STEPS w/ WALLS
INSTALLATION INSTRUCTIONS
Rev K
12/27/2018
1206
Page 4 of 4
Specifications
ADA STEPS:
Shall be made using punched, formed, and welded
12 gauge sheet steel with reinforcing cross
members and gussets. The ADA Steps shall be
Play-Tuff™ coated after fabrication.
ADA STEP WALLS:
Shall be fabricated using 1.315" O.D. 12 gauge
steel tubing with welded 1.029" O.D. 14 gauge steel
rungs and 1/4" thick steel brackets. The ADA Step
Walls shall have a multi-stage baked-on powder
coat finish.
HARDWARE:
Shall be stainless steel, zinc/nickel plated or
galvanized as required to resist rust and corrosion.
R3.5-1206-24 - 24" ADA Steps w/ Walls R3.5
Part # DESCRIPTION QTY.
CE-4203 ADA Steps 24-26 1
FS-1206-24R35 ADA Steps 24-26 Wall Set R3.5 1
HS-1001-R35 Socket Clamp Set R3.5 4
9103062-TR Bolt Button Head 3/8" x 1-1/4" 4
9103072-TR Bolt Button Head 3/8" x 1-1/2" 8
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick 24
9413002 Nut Lock 3/8" 12
R3.5-1206-36 - 36" ADA Steps w/ Walls R3.5
Part # DESCRIPTION QTY.
CE-4294 ADA Steps 36-26 1
FS-1206-36R35 ADA Steps 36-26 Wall Set R3.5 1
HS-1001-R35 Socket Clamp Set R3.5 4
9103062-TR Bolt Button Head 3/8" x 1-1/4" 4
9103072-TR Bolt Button Head 3/8" x 1-1/2" 8
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick 24
9413002 Nut Lock 3/8" 12
FS-1206-36R35 ADA Steps 36-26 Wall Set R3.5 1
R3.5-1206-12 - 12" ADA Steps w/ Walls R3.5
Part # DESCRIPTION QTY.
CE-4335 ADA Step 12-26 1
FS-1206-12R35 ADA Steps 12-26 Wall Set R3.5 1
HS-1001-R35 Socket Clamp Set R3.5 4
9103062-TR Bolt Button Head 3/8" x 1-1/4" 4
9103072-TR Bolt Button Head 3/8" x 1-1/2" 8
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick 24
9413002 Nut Lock 3/8" 12
Part # DESCRIPTION QTY.
CE-4380 ADA Steps 18-26 1
FS-1206-18R35 ADA Steps 18-26 Wall Set R3.5 1
HS-1001-R35 Socket Clamp Set R3.5 4
9103062-TR Bolt Button Head 3/8" x 1-1/4" 4
9103072-TR Bolt Button Head 3/8" x 1-1/2" 8
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick 24
9413002 Nut Lock 3/8" 12
R3.5-1206-30 - 30" ADA Steps w/ Walls R3.5
Part # DESCRIPTION QTY.
CE-4194 ADA Steps 30-26 1
FS-1206-30R35 ADA Steps 30-26 Wall Set R3.5 1
HS-1001-R35 Socket Clamp Set R3.5 4
9103062-TR Bolt Button Head 3/8" x 1-1/4" 4
9103072-TR Bolt Button Head 3/8" x 1-1/2" 8
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick 24
9413002 Nut Lock 3/8" 12
R3.5-1206-42 - 42" ADA Steps w/ Walls R3.5
Part # DESCRIPTION QTY.
CE-0030 ADA Steps 42-26 1
FS-1206-42R35 ADA Steps 42-26 Wall Set R3.5 1
HS-1001-R35 Socket Clamp Set R3.5 4
9103062-TR Bolt Button Head 3/8" x 1-1/4" 4
9103072-TR Bolt Button Head 3/8" x 1-1/2" 8
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick 24
9413002 Nut Lock 3/8" 12
R3.5-1206-48 - 48" ADA Steps w/ Walls R3.5
Part # DESCRIPTION QTY.
CE-4486 ADA Steps 48-26 1
FS-1206-48R35 ADA Steps 48-26 Wall Set R3.5 1
HS-1001-R35 Socket Clamp Set R3.5 4
9103062-TR Bolt Button Head 3/8" x 1-1/4" 4
9103072-TR Bolt Button Head 3/8" x 1-1/2" 8
9333002 Washer Flat 3/8" x 1" O.D. x .100" thick 24
9413002 Nut Lock 3/8" 12
R3.5 Parts List
Periodically tighten all screws, bolts and nuts. A
periodic inspection of all parts is necessary. If a part
is broken or worn, replace immediately. For general
maintenance please refer to our Playground
Maintenance Manual.
Maintenance