PLAYNETIC KineticSpinner User manual

KineticSpinner
User Manual
KSP90023_16042020
Loohorst 3 | 7207 BL Zutphen | The Netherlands
[email protected] | www.playnetic.nl | [phone]

Loohorst 3 | 7207 BL Zutphen | The Netherlands
[email protected] | www.playnetic.nl | [phone]
Install the Product
Overview Product
Control the Volume
Change the Content
Maintenance
Check Interactive Elements
Play and Test
Install and Manage a Timelock
3
3
4
5
8
3
4
7
2

Install the Product
Install the product according to the Playnetic Installation Manual.
During the installation, make sure that the potential users can not
be exposed to hazards / dangerous situations. Check the stability
of the product.
Number of Users
Playnetic recommends you to use the product with a maximum of
eight users.
3
Overview Product
The overview above shows where all important parts can be
found.
Check Interactive Elements
Use the product and generate energy. If applicable, check that the
interactive elements such as the music, lights, smell, electronic- and
mechanical parts are working properly.
Energy box
LED
Service hatch
Pushbutton
Handle
Platform

Control the Volume
1. Remove the bolts with the supplied hex key.
2. Remove the service hatch with the label.
3. Generate energy with the product.
4. Adjust the volume.
5. Close the service hatch.
Play and Test
1. Generate energy with the product.
2. Test if the correct MP3 files are played.
3. Test if the LED line runs in the correct direction.
4. Test if the MP3 file and LED color change by pushing the
button.
*Are the MP3 files incorrect? Then change the content.
Follow the instructions in the Playnetic User Manual.
Contact your dealer when LED line runs incorrectly.
4
volume

Change the Content
1. Get a USB stick. Make sure that you meet the following requirements:
a. Only use MP3-files.
b. The name of the MP3 file needs to have at least 5 characters.
c. The name of the MP3 file can’t contain any strange characters.
d. A single MP3 file can not be bigger than 2 MB.
2. Use the supplied hex key and unscrew the bolts.
3. Remove the service hatch.
5
USB port
D
E
Read more

USB port
6
Change the Content
4. Put the USB stick into the computer.
5. Generate energy with the product. Wait until the update is
completed. Remove the USB stick after completion.
6. Make sure that you put the dust cover back over the USB port.
7. Close the service hatch.
“In progress, please wait...”
“Downloading data
completed, remove USB
device”

7
“In progress, please wait...”
“Downloading data
completed, remove USB
device”
Receive Timelock
1. Receive a USB device. Playnetic has set the
correct start- and endtime for you.
Install and Manage a Timelock
1. Remove the bolts with the supplied hex key.
2. Remove the service hatch.
3. Important! The timelock must be installed at 12
o’clock local time. If the install is being done too late or
too early, the timelock will not work properly.
4. Put the USB stick into the computer.
5. Generate energy. Wait until the update is completed.
Remove the USB stick after completion.
6. Make sure that you put the dust cover back over the
USB port.
7. Close the service hatch.
Update Your Timelock 2x a Year
For updating your timelock, use the USB device which
you received from Playnetic with the correct start- and
endtime (same USB device for install option). Repeat
step 1 to 7 in ‘install a timelock’ to complete the update.

Maintenance
The product must be maintained according to the Playnetic
Maintenance Advice.
8