stilum letus User manual

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten
Mounting instructions for „letus“
Item-No. 51 5518 401
State: 17.09.2015 S. 1
Diagram 1: Overall view of the play equipment

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten
Mounting instructions for „letus“
Item-No. 51 5518 401
State: 17.09.2015 S. 2
A
A
Pos. Anz. Bezeichnung Artikelnummer Abmessung Norm Werkstoff ZNr
1 1 0145-01-00-Gestell SchweißBG
2 1 0145-02-00-Dach SchweißBG
3 4 M10x20-Zylinderschraube M10x20 1.4301
1927
1170
450
A-A (1 : 10)
2
1
3
OK
D
E
F
C
1 2 3 4
B
A
3 2 1 5
C
D
4 6 7 8
A
B
Zust.
Änderung
Datum
Datum
Name
Name
Bearb.
Gepr.
Norm
A3
Bl.
Allgemein-
toleranzen
DIN 7168-m
Maßstab 1:1
06.02.2015
M.Boehm
Letus
Gesamtansicht
0145-00-00
Fertigung
E
600
500
450
OK
Beton
Concrete
Füllmaterial
Filling
Legende
Freie Fallhöhe ≤ 0mm
D
E
F
C
1 2 3 4
B
A
3 2 1 5
C
D
4 6 7 8
A
B
Zust.
Änderung
Datum
Datum
Name
Name
Bearb.
Gepr.
Norm
A3
Bl.
Allgemein-
toleranzen
DIN 7168-m
Maßstab 1:50
06.02.2015
M.Boehm
Letus
Fundamenteplan
0145-00-00
Fertigung
E
1. Select the play equipment location in consideration of the required safety area
(see Diagram 4: Ø 4200 mm).
2. Carry out excavation work for the foundation as shown in Diagram 2.
After excavation, compress the foundation oor.
Note: The toddler element is built in on the play level. Pay attention to items
marked „game level“ of play equipment!
3. Set up the concrete foundation acc. to the dimensions indicated (LxBxH 600
x 600 x 500 mm) with central, horizontal reinforcement (BST 500 S) in the
quality class C 20/25.
4. After a setting period of 10-14 days, depending on weather conditions and
foundation size, clean the surface of the foundations. Place the equipment
onto the foundation.
5. Screw it onto the foundation using the dowels M10 for heavy loads included in
the delivery.
Play level
concrete foundation
Diagram 2: Side view with dimension details „letus“
Diagram 3: Foundation plan with dimension details „letus“
600
500
450
OK
Beton
Concrete
Füllmaterial
Filling
Legende
Freie Fallhöhe ≤ 0mm
D
E
F
C
1 2 3 4
B
A
3 2 1 5
C
D
4 6 7 8
A
B
Zust.
Änderung
Datum
Datum
Name
Name
Bearb.
Gepr.
Norm
A3
Bl.
Allgemein-
toleranzen
DIN 7168-m
Maßstab 1:50
06.02.2015
M.Boehm
Letus
Fundamenteplan
0145-00-00
Fertigung
E
Reinforcement plan: Concrete foundation with reinforcement
Main foundation: BSt 500S
Ever 4 stirrups Ø 8 mm lengthwise and cross
Concrete cover h´= 3 cm
Concrete quality class B25

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten
Mounting instructions for „letus“
Item-No. 51 5518 401
State: 17.09.2015 S. 3
6. Set up impact-absorbing playground surfacing according to EN 1177 HIC
1000.
Critical drop height: 0 mm
Recommended surface material: grass, sand, bark mulch, gravel, synth. fall
protection
7. Do not allow children to use the equipment before the installation has been
nished.
Attention: If the play equipment has been incompletely installed or partly dis-
mantled when carrying out maintenance and repair work, this may lead to particu-
lar risks of injury for the user. For this reason, make clearly visible that the equip-
ment shall not be used in such cases.
NOTE: Play equipment, which contain components made of stainless steel should
not come with „normal“ steel parts in contact. Those steel parts may rub off and
leave small steel particles in combination with moisture brown rust stains.If such
corrosion occur on stainless steel parts, they are ne with an abrasive (240 grit) to
remove.
Please take care when transporting and setting up the fact that the components
are made of stainless steel with no „normal“ steel parts in contact.
1500
4174
D
E
F
C
1 2 3 4
B
A
3 2 1 5
C
D
4 6 7 8
A
B
Zust.
Änderung
Datum
Datum
Name
Name
Bearb.
Gepr.
Norm
A3
Bl.
Allgemein-
toleranzen
DIN 7168-m
Maßstab 1:20
06.02.2015
M.Boehm
Letus
0145-00-00-Letus Mindestraum
0145-00-00
Fertigung
E
Diagram 4: Top view „letus“ Extent of the
minimum zone =
safety area

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten
Mounting instructions for „letus“
Item-No. 51 5518 401
State: 17.09.2015 S. 4
In order to preserve a good visual appearance of your stilum playground equip-
ment over a long period one should take care of maintenance of the stainless
surface even despite of their corrosion resistance.
Especially areas, which can not be reached by rainfall should be frequently clea-
ned from dirt and deposits due to air pollution and dirt caused by the atmosphere.
Light soiling can easily be romoved by using a high pressure cleaner.
For persistent deposits use a clean cloth moistened with a special liquid cleaner
(e.g. on phosphoric acid) and rinse off with clear water after a short application
time. During cleaning with mild abrasive components, only wipe over stainless
steel surface in polishing direction.
For heavily soiled surfaces, polishes can be used (e.g. for cleaning chrome on
cars) or for greasy and oily dirt alcoholic cleaning agents and solvents (e.g. ethyl
alcohol, isopropyl alcohol or acetone).
However, it should be noted that the dissolved soiling is not spread over the sur-
face again.
Do not use any chlorid or hydrochloric containing cleaning products nor scouring
powder, bleaching - or silver polish cleaner. Cleaning intervals depend on type and
degree of soiling as well as on demands made on optical characteristics. Therefo-
re cleaning is advisable at intervals of six to twelve months – whereby in the case
of strong soiling it is appropriate to clean the playground equipment at intervals of
3 to six months.