PLAYNETIC Audionetic User manual

Audionetic –Installation manuel
AUDIONETIC_INSTALLATIE HANDLEIDING_1..0 - COPYRIGHT PLAYNETIC 2014

Audionetic - Installation manuel
AUDIONETIC_INSTALLATIE HANDLEIDING_1..0 - COPYRIGHT PLAYNETIC 2014
Minimal 150 cm
obstacle free zone
ø
2. Determine the place of the Audionetic. Take into account
that there are no obstacles in the obstacle free zone. See
picture.
1. Check using the part list if all parts are supplied correctly.
Before
installation
Make sure that during installation bystanders are not exposed
to danger.

Audionetic –Installation manuel
AUDIONETIC_INSTALLATIE HANDLEIDING_1..0 - COPYRIGHT PLAYNETIC 2014
PERMANENT PERMANENT
PREFAB
Installation
Select the desired installation method for your application.
For questions please contact your supplier.

Audionetic –Installation manuel
AUDIONETIC_INSTALLATIE HANDLEIDING_1..0 - COPYRIGHT PLAYNETIC 2014
Cast
Installation cast
with concrete
0 mm
- 488 mm
Waar zit het ‘0 mm’ lijn
One can in itself determine the amount of
concrete and with it the weight of the
foundation (at least 64 litres concrete).

Audionetic –Installation manuel
AUDIONETIC_INSTALLATIE HANDLEIDING_1..0 - COPYRIGHT PLAYNETIC 2014
12 mm
100 mm
400 mm
400 x 400 mm
A Installation cast
with concrete
Cast: pre-assembly foundation frame
Dig a hole of 400 x 400 and 500 mm
deep. Set the mounting frame above the
hole and fill it with concrete as in the
right figure. Make sure the mounting
frame stands upright/level.
Use the bolt M10 x 20, spring washer ø
10.2 mm and flat washer M10 for
mounting the Audionetic on the
mounting frame
Make sure the Audionetic is not used
until the concrete has hardened.

Audionetic –Installation manuel
AUDIONETIC_INSTALLATIE HANDLEIDING_1..0 - COPYRIGHT PLAYNETIC 2014
100 mm
400 mm
400 x 400 mm
B Installation cast
with concrete
Cast: complete montage
Use the bolt M10 x 20, spring
washer ø 10.2 mm and flat washer
M10 for mounting the Audionetic
on the mounting frame
Dig a hole of 400 x 400 and 500 mm
deep. Set the Audionetic above the
hole and fill it with concrete as in
the right figure. Make sure the
mounting frame stands right.
Make sure the Audionetic is not
used until the concrete has
hardened.

Audionetic –Installation manuel
AUDIONETIC_INSTALLATIE HANDLEIDING_1..0 - COPYRIGHT PLAYNETIC 2014
Installation
using prefab
concrete block
PERMANENT
PREFAB
0 mm
- 350 mm
-Great for in tile plateau (300x300mm);
-Easy installation based on prefab concrete block.

Audionetic –Installation manuel
AUDIONETIC_INSTALLATIE HANDLEIDING_1..0 - COPYRIGHT PLAYNETIC 2014
350 mm
350 mm
Installation with
prefab concrete
block
Dig a hole of at least 350 x 350 mm
and 350 mm deep.
1. Install the concrete block in such a
way that the top is equal and
horizontal with the ground level.
2. Install the Audionetic with (4 x) bolts
and (4 x) spring washer
Mount the adapter plate
underneath the Audionetic.
Secure plate with the 4 bolts.