Point of View International M4 Smartwatch manual English
3
3.0 Function descriptions and use
l When the device is turned off, touch and hold the function button for more than 3 seconds to turn the device
on.
l When you go to the Bluetooth address settings of the smartwatch, press and hold for 2 seconds to turn it off.
Short press will allow you to exit the shut down page.
l Bracelet reset device: This function will clear all data of the smartwatch (such as step counting)
l To use the screen, touch the function key shortly.
l To view the menu, press the function key once. The menu items are as following: State, BPM, Sports,
Message and More.
l Tips for Android users: When using the reminder function, you will need change your settings in your
smartphone to allow "FitPro" to run in the background. It’s recommended to add "FitPro" to the rights
management and confirm all settings to give the watch the permissions it needs to function.
Clock interface
After syncing with the phone, the bracelet will automatically synchronize the time with your smartphone. To switch
between a 24h or 12h clock, please hold the function key for approx. 2 seconds. You will see the change in the
screen directly.
Pedometer
The smartwatch will track your current real-time step count and also make a daily record.
Distance meter
The distance is determined based on the number of steps taken.
Calorie meter
The amount of burned calories is determined based on the number of steps taken.
Heart rate, blood pressure, blood oxygen – 3-IN-1 FUNCTION
When you want to use the heart rate monitor, please enter “BPM” setting through the menu and start the
measuring by long pressing on the function button. It will take up to 60 seconds to measure the heartbeat and
other functions under the BPM menu Under the BPM setting in the menu, you will find the heart rate monitor,
blood pressure and blood oxygen monitor.
Multi-sport mode
Running Mode/Skipping rope mode/Sit-up mode
Under these functions, you can record the burned calories and the duration of your workout.
Sleep mode
When you fall asleep, the smartwatch will automatically enter the sleep monitoring mode. It automatically detects
your deep sleep/shallow sleep/wake up during the entire night and calculate your sleep quality. The sleep data
can only be viewed from the app.
Remark: When wearing the smartwatch during sleep, it will collect sleep data and start to detecting sleeping cycle
from 10PM. Every 3-4 hours, the app will synchronize with the smartwatch to collect the data.
Push notifications
When receiving push notifications, you can view the last 3 messages from the “Message” setting in the menu.
