POVL CUSHION STORAGE BOX 60 User manual

ASSEMBLY INSTRUCTIONS
Line up the side frame assemblies with front & back
frame assemblies and secure them with the Ø8x30mm
dowels .
Use the carton as a protective work surface
by flattings out the sides and ends.
2
1
We recommended two people be on hand
for this assembly
Tools required :
- Sand paper (included)
- Wood Block (included)
- Hammer or Mallet
Dowels Ø8x30mm
A
8 Pcs
Lock Pin for Hinge
B
3 Pcs
C
A
D
E
F
Important:
Note that the side panel are left and right handed!
Tenon with the white hangtag must connect with the
back panel with the hinges.
Side A Assembly
Side B Assembly
Back Assembly
Front Assembly
C
D
E
F
G
H
Bottom Assembly
Lid Assembly
CUSHION STORAGE BOX - 60"

ASSEMBLY INSTRUCTIONS
3
4
5
6
Place the bottom frame inside the assembled box
with the fabric facing up.
With the aid of a hammer and the wood block,
insert the lock pins into the hinges
to connect the back frame and the lid.
Push the gas spring onto
the pin attached on
the side frames and the lid.
Full Assembly
G
H
B
CALERA CUSHION STORAGE BOX - 60"