1.open the battery cover in the direction of the arrow, insert two AAA LR03
batteries into the battery slot accordin8 to the symbol@andO. Mount the
bottom cover.
2,Donotcombineanoldbatterywitha new one, or use different typesof
batteries toBether,
3.lf the ladyshave will not be used for a long time, please remove the batteries.
PSl 086:
. You will be available ei8ht hours with thls PS 1 086 ladyshave.
. lfthe ladyshave is charged more than 10 hours frequently,the battery
capacity will be reduce.
. Do not operate this ladyshave when chargin8,
CharBing(see fig.8)
l,Please make sure that the power is off before charging.
2.Connect the USB interfaces of ladyshave and adaptor, then plug intomains
to recharge.
i/////,r '//////////////////////// /il///h
10
Recycling the 6atterY (see fig.9)
Battlriesiontain substahces that may pollute the environment.The batteries
in this shaver is not intended to be replaced by consumers ' However ' the
batteries may be replaced at an authorized service center.
i, Tn. proc"drre described below is intended only for removal of the
rechargeable battery for the purpose of proper disposal.
Z. 0nly in-the battery aompletely exhausted before the battery removed'
3. Do iot remove the battery after the shaver and power will be connected
together,
The cutting system maintenance
1.lt is recommended that you replace the cutter head at least every year to
maintain your ladyshave's cutting performance,
Z.Turn the ladvshave off before replacing the cutter head'
3,Remove the cutter head up, then install a new one
'r/////////,//,//,///,////w/////////l///////////,//,////////,//h////////////////////il
11
