Thank you for purchasing this quality product. Be sure to check all packing material carefully for small
parts which may have come loose inside the carton during shipment. Separate, identify, and count all
parts and metal hardware. Compare with parts list and hardware illustrations to be sure all parts are
present. If any part(s) are missing or damaged, phone, fax, or mail to our Customer Service Department.
For efficient and speedy service, please indicate the model number and code letter of part(s) needed.
ATTENTION: SOME LETTERED PARTS LISTED ON THE INSTRUCTION SHEET MAY NOT BE IN PARTS BAG AS THEY
MAY ALREADY BE ASSEMBLED. CAREFULLY CHECK PARTS AND PACKING MATERIALS PRIOR TO ORDERING
REPLACEMENTS. PRODUCT MUST BE COMPLETED BEFORE FULLY TIGHTENING SCREWS
TWO PERSONS ARE REQUIRED FOR ASSEMBLY.
Tools Required for assembly: Phillips Screwdrivers (not included); Allen Wrench (included).
Made in China
MODEL NO. 334-119
ASSEMBLY INSTRUCTIONS (DJ)
This bed is designed to use only a mattress which is
74” - 75” long and 37-1/2” - 38-1/2” wide.
ensure thickness of mattress does not exceed 8” and
mattress is at least 5” below upper edge of guardrail.
Replacement parts, including additional guardrails,
may be obtained from Powell Company.
