Power Wizard PW350B User manual

The Power Wizard Portable Corral Kit features the PW350B Electric
Fence Energizer. This battery-operated energizer is capable of
powering about 35 acres of properly installed fence, provided an
adequate ground system is installed.
All of the components necessary to build your Power Wizard Portable
Corral are included in this kit, except the following:
THINGS YOU WILL NEED
• Rubbermalletorahammer
• Four D-cell alkaline batteries for the Power Wizard PW350B
ElectricFenceEnergizerORone6or12Vexternalbattery
Table of Contents
CONSTRUCTION
Posts .................................................................................................. 2
Fence Wire........................................................................................ 2
Ground Connections ....................................................................... 2
Fence Energizer Operation ............................................................. 3
INSTALLATIONOF
POWERWIZARDPORTABLECORRALKIT ......................................... 3-8
ANIMALTRAINING ................................................................................ 8
USINGOTHERSUITABLEMATERIALS ................................................... 8
ENERGIZERINSTRUCTIONS ............................................................... 9-14
TROUBLESHOOTING ............................................................................ 14
WARRANTY .......................................................................................... 15
WARRANTYCLAIMS ............................................................................ 15
CONTENTSOFTHISKIT ....................................................................... 16
POWER WIZARD PORTABLE CORRAL KIT
CONTENTS
1 PowerWizardPW350BElectricFenceEnergizer
Requires 4 alkaline D-cell batteries (not included)
12 54”FiberglassPosts(3piecesperpost)
consistingof:12pointedsections,24bluntend
pieces,25tubular-shapedconnectors(ferrules)and1drivecap
1 SpoolofPolywire,275feet
25 I-15YRScrew-TightRoundPostInsulators(Yellow)
1 JumperWire
4 CornerStakesandTie-DownCords
2 GateHandleswithConnectingHardware(2ActivatorPlates,
4RubberStopsand2KeyRings)
1 24”GroundRod/EnergizerHanger
1 RollofFluorescentFlaggingTape
1 PowerWizardT-7FiveLightFenceTester
1 DuffelCarryingBagwithD-Rings
1 InstallationInstructionManual
1 ReplacementPartsOrderForm
(800) 866-2161
www.powerwizardinc.com
04-0358-00 1-09
PORTABLE CORRAL KIT
INSTALLATION INSTRUCTIONS
PartNo.PLK-1
10375StateRoute43
Streetsboro,Ohio44241USA
330-562-2222•Fax330-562-7403

CONSTRUCTION
Posts
Care must be taken to locate the posts in such a manner that when
wire is strung from post to post, it will not touch any green growth
or the shock will be reduced.
Fence Wire
Suitable wire for your portable corral is the polywire that has been
includedwiththiskit.ItisPowerWizard’shighlyconductive3strand
polywire, which features a mixture of tinned copper and stainless
steel conductors, twisted in a special UV protected polyethylene-
weave.
Ground Connections
The effectiveness of an electric fence is reliant on the proper instal-
lation of the ground system. The ground rod, which also holds the
energizer,isa24”metalrod,whichisincludedinthiskit.Theground
rod should be driven into moist ground as far as possible.
Ifthesoilisverydryorsandy,thecurrenttravelingthroughtheani-
mal and back to the ground system may limit the effectiveness of the
corral. Pouring a good amount of water around the ground rod can
help in dry soil conditions.
The best method of correcting for poor soil conditions is to string
another fence wire all the way around, above or below the hot wire,
dependingonyouranimal’sheight.Thiskitcontainstheextramate-
rial to add this ground wire when needed. Do NOT allow this wire
to accidentally touch any of the charged wires or there will be no
shock.
Using this method allows the animal to receive a shock when it
touchesBOTHthegroundANDanyofthechargedwires.Iteffec-
tively increases the shock capability of the fence, since the animal
willbegroundedinTWOways–throughthesoil(evenifitconducts
onlyslightly)–andthroughtheadditionalgroundwire.
POWER WIZARD WARRANTY
30 DAY SATISFACTION GUARANTEE
AgraTronix guarantees your complete satisfaction with this Power Wizard
Portable Corral Kit, including the Power Wizard PW350B Electric Fence
Energizer.Ifyouarenotsatisedwiththisproduct,youcanreturnthekitto
the original place of purchase within 30 days of purchase for a full refund.
Proof of purchase is required for a full refund.
LIMITED WARRANTY
AgraTronix warranties this Power Wizard Portable Corral Kit and Power
Wizard PW350B Fence Energizer to the original purchaser for a period
of two (2) years from the date of purchase, when installed and used in
accordancewiththeenclosedinstallationinstructions.Youmustretainyour
receipt for proof of purchase. This warranty covers defects in materials and
workmanship for both the parts and the fence energizer. The warranty also
covers damage to the energizer caused by lightning.
TO MAKE A WARRANTY CLAIM
1.Firstdisconnectenergizerfromfenceandconrmthatvoltageoutput
at the energizer terminals is not normal, using an electric fence volt
meter.
2.Attachanoteshowingyourname,returnaddress,phonenumberand
a brief description of the problem.
3. Pack product carefully in oversized carton with crushed newspaper for
cushioning.
4.Yourproductshouldbeshippedprepaidandinsuredagainstshipping
loss or damage.
5. Before returning products under warranty, you must call Power Wizard
at (800) 866-2161 to obtain a Return Goods Authorization number and
a shipping address for the service center that will process the return.
TheRGAnumbermustbewrittenontheoutsideofthecarton,nearthe
shipping label.
2 15
TERMS THAT APPLY TO BOTH THE
GUARANTEE AND WARRANTY
Improperinstallation,misuse,neglectandtamperingofanykindareNOT
coveredunderthe30-DayGuaranteeortheLimitedWarranty.Nowarran-
ty other than the above is express or implied. Implied warranties of mer-
chantabilityandtnessforaparticularapplication, are hereby disclaimed
unlessthelawspecicallyprecludesthisdisclaimer.Themanufacturerand
seller have no liability for damages, incidental or consequential, result-
ing from or caused by any failure, malfunction or defect of any product.
The sole obligation of AgraTronix shall be limited to repair or replacement,
at its option, of the defective fence energizer or part and prepaid return to
the owner.

Fence Energizer Operation
See Page 9-13 for detailed instructions on connecting the Power
Wizard PW350B Electric Fence Energizer to your Power Wizard Por-
table Corral Kit.
INSTALLATION
STEP 1
Drive one pointed rod 8” to 12” into the ground at each corner,
approximately 30 feet apart, using the included drive cap to prevent
splintering. Enough polywire is supplied to build a 30-foot square,
2strandcorral.
Aroundcorralispreferredbymanyhorseenthusiasts.SeeStep4on
Page6foranillustrationofthisconguration.
POWER WIZARD PW350B
SPECIFICATIONS AND FUNCTIONS
ThePW350BhasanLED(lightemittingdiode)onthefrontoftheunit.
Whentheenergizerisrunning,theOn/Offknobisusedtosetthepulserate
andcanbeadjustedatanytime.TheLEDashesonceforeverypulse.
Ifthesupplyvoltagedropsbelowapproximately3.1V,theLEDstartsto
blinkrapidlywithweaklightashes.Thisindicatesthebatteryislow.
TECHNICAL DATA
Power Source: Internal4X1.5ValkalineD-cellbatteryor
external6or12Vbattery
Current Consumption: Approx.20-40mAdependingonoperating
conditions
Pulse Rate: 20-60pulsesperminute(useradjustable)
Output Energy: 70-360mJdependingonoperatingconditions
at 500 ohms
Operating Temperature: 14to122˚F(–10to50˚C)
POWER WIZARD PW350B
BATTERY LIFE TABLE
This table shows the averagebatterylife whenusing4D-cell alkaline
batteries. NOTE:40pulsesperminuteisacommonsetting.
NOTE: Battery life will be shortened at colder temperatures.
30’
30’
PW350B
3
weeks
4
weeks
5
weeks
6
weeks
9
weeks
60 50 40 30
Pulses Per Minute20
314
Drive Cap
See Figure A
below.
Figure A.
Drive cap, fiberglass post
and rubber mallet.
TROUBLESHOOTING
Iffencevoltageislessthan2000V,checkthesebeforecallingservice:
• Checkthattherearebatteriesintheenergizerandtheyareinserted
correctly. Note the battery icons located on the inside of the top lid.
(seepage11forcorrectinstallationofbatteries)
• Disconnect energizer from fence and check energizer voltage only.
Voltageshouldbegreaterthan6000V.Ifless,batteriesmaybelow.
• Checkyourgroundrodinstallation.
• Checkyourconnectionstotheenergizer.
• Checkyourconnectionsatthegroundrod.
• Ensurethattheenergizerisonandashing.
If you are still having problems, please call
Customer Service at (800) 866-2161
20

STEP 2
Attach2bluntrodswithconnectors*tocompletecornerposts.
Attach screw-tight insulators at desired height.
Tightensecurely.Heightwillbedeterminedbytheanimalsyouare
putting in the corral.
Drivetie-downstakeatcornerswithdrivecap.
Tie cord to stake and hammer stake into ground. At the other
end of the cord, make a loop and knot and loop over top of posts as
shown. See Figure B.
A round corral may not need any tie-down stakes. See Step 4 on
Page6foranillustration.
POST MOUNTING METHOD
The Power Wizard PW350B will be mounted to the metal ground
rod(energizerhanger)includedwiththiskit.Hangtheenergizer
on the post using the channel located on the back left of the
energizer.
LoosenthePostClamp/GroundTerminalKnob(A)toallowthe
post to slide into place. Follow the guide to the right for
specicpostlocation.
TightentheGroundTerminalKnob(A)toclampthePW350Bto
the post.
1
1
2
2
3
3
4
4
1/2 inch (10-12mm)
furnished ground rod
goes in this channel
413
Figure B.
Cord looped
over stake.
Figure C.
Posts
connected by
ferrules
(connectors).
Figure H. Energizer attached
to ground rod.
*NOTE:
Twist rods
totinto
connectors
properly.

STEP 3
Ifagateopeningisdesired,installanotherpostwhereyouchooseto
have the gate opening.
Attach a 3-hole activator plate at desired height as shown. Use
rubber stops to keep activator plate stationary.
Tie polywire to activator plate and stretch your wire around the
perimeter of the corral, attaching to the insulators.
Attach the key ring to the gate hook as shown. Pull polywire snug
and tie securely.
The key ring is used to prevent damage to the polywire. The top
“hot”wireisnowcomplete.
EXTERNAL BATTERY INSTALLATION
The Power Wizard PW350B is able
tooperatewithanexternal6or12V
battery. To connect the external
battery, first turn the energizer off
and remove the internal
D-cells. Connect the wires provided
to the underside of the unit using
atfemaleconnectors.
The+(plus)shouldbeonthesame
side as the control switch
andthe–(minus)ontheotherside.
Usethebatteryclips
to connect to the
corresponding terminal
of the battery.
5
5
6
6
7
7
8
8
***WARNING***
INTERNALBATTERIES
MUSTBEREMOVED
BEFOREEXTERNAL
BATTERYISCONNECTED.
512
Figure E. Gate assembly.
NOTE:Usinganexternal12VbatteryWILL MORE THAN DOUBLE
the output energy of the energizer. Gate
Handle
Key
Ring
Rubber
Stops
Activator
Plate
Figure D. Gate components.

STEP 4
Installthebalanceofthelinepostsandattachinsulatorsandwire.
Insulatorsshouldbeplacedsothatthewirewillbetowardtheinside
of the corral.
Once you have all posts,
insulators and wire in place,
adjustment of the corner
tie-downs may be necessary.
ROUND CORRAL
2. Carefully install the ground system according to the directions
includedinthismanual.Mostelectricfencingfailuresaredueto
improper grounding.
3. Take time to properly connect leadout wire, ground wire and
fence line splices. This is the second most common cause of elec-
tric fence failure. Use clamps, split bolts and taps if necessary
(notincludedwiththiskit).Makesure allconnectionsurfaces
are of bare shiny metal.
4. When using wire for fence and earth connections, use ade-
quately insulated hook-up or underground wire (rated for at
least20,000volts)forleadoutwirestogroundandfenceand
anywhere the hot wire must travel underground. Never use
standard household insulated wire, which is generally rated at
only600voltsorless.
5. Maintainproperdistancesfromburiedandaboveground:util-
ity company ground rods, water pipes, metal siding and tele-
phone wire.
6. Useanelectricfencevoltmetertoperiodicallycheckthecondi-
tion of your fence and to diagnose and repair shorts, poor con-
nections and inadequate ground conditions.
11
11
611
Tieuorescentmarkingtapebetweenposts,ifdesired. 11
INTERNAL BATTERY INSTALLATION
TOOPENUNITFORBATTERYACCESS:
Pulltabbehindcoverwithngernailor
atscrewdriverandlifttopupwards.
The Power Wizard PW350B operates with
either4alkalineD-cellbatteriesoran
external6-12Vbattery.Opentopcover
androtatebackwardsuntilfree.Insert
the4D-cellsasshownwiththe
+ facing down in the left column
and the + facing up in the right
column.

Driveonehalfofthelengthofthegroundrod(energizerhanger)
intotheground,leavingtheotherhalf above ground.Locatethe
ground rod outside of the corral and away from the corral and
animals(seeFigureGbelow).
HangthePowerWizardPW350Benergizerandactivateaccordingto
fenceenergizeroperationinstructions(seePage9-13).
Pourwateraroundgroundrod(ifyoursoilconditionsareverydry
orsandy).
Bottomwiremaybemade“hot”byattachingtophotwiretothe
bottom wire using the included jumper wire.
DONOTconnecthotwiresto
the ground system.
Check fence operation with
supplied tester. To test your
fence: push wire probe into
moist soil. Touch fence wire
withbrasspoint.Lightswill
indicate the peak pulse volt-
age.
SAFETY CONSIDERATIONS
IMPORTANT – READ THE FOLLOWING SAFETY CONSIDERATIONS
CAREFULLY:
1.WARNING:DONOTCONNECTENERGIZERSIMULTANEOUSLYTO
A FENCE AND TO ANY OTHER DEVICE SUCH AS A CATTLE OR
POULTRY TRAINER. OTHERWISE, LIGHTNING STRIKING YOUR
FENCEWILLBECONDUCTEDTOALLOTHERDEVICES.
2.CAUTION:RISKOFELECTRICSHOCK.Donotinstallwheresmall
children, the elderly or unhealthy persons may come in contact
withtheliveportionsofelectricfencing.Useelectricfencewarn-
ing signs wherever humans may come in contact with the fence.
3.NEVERelectrifybarbedwireorloosefencingmaterialsthatrisk
entanglement of a human or animal. Exposure to continuous or
multiple shocks is very dangerous.
4.STAYAWAYfromthefenceenergizerandfromthefenceline
just before and during lightning storms.
5.FOLLOWallnational,stateandlocalregulationsthatmayapply
to installation of electric fence.
STEP 5
710
6.REFERTOAUTHORIZEDREPAIRCENTERFORSERVICE.Thereare
no user serviceable parts. Never alter the design of the energizer.
Doingsoishazardousandwillvoidthewarranty.
7.NEVERputmorethanoneenergizeronafence.Doingsoisdan-
gerous because it may reduce time off between pulses, may dam-
age the energizer and will invalidate the warranty.
8.DONOTrunfencewireabovegroundnearhighvoltagepower
lines.Iftooclose,theelectricfencemaypickupdangerouslevels
of power from the high voltage lines. Never cross under a high
voltage line with electric fence.
9.ALWAYSmaintainanadequategroundsystemsecurelyattached
to the energizer.
10.NEVERchargeabatterythatisconnectedtoafenceenergizer.Al-
ways disconnect the battery from the energizer before charging.
KEYS TO SUCCESSFUL
ENERGIZER INSTALLATION
Take care of the following details and you will save many hours of
labor and time.
1. UsetheenergizerprovidedwiththisPortableCorralKit.Using
a fence energizer that is underpowered for the fence condition
and application could render your fence ineffective.
Jumper
Wire
Wire
from
energizer
to top
strand of
polywire
Ground
Rod
Figure F. Energizer
mounted on ground rod.
Figure G. Fence and energizer setup.

STEP 6
Animal Training
You are now ready to lead your animal to your Power Wizard
Portable Corral. Walk your animal around the perimeter of the corral
to familiarize the animal to the new surroundings.
Itisimportantthatananimal’srstexperiencewithanelectricfence
shock is one of respect or fear. Some animals require more than one
shock experience for lasting respect of the fence line. Always train
theanimaltothefencebyinsuringthattheanimal’srstapproach
to the fence is slow and that an effective repelling shock is experi-
enced.
Ifyouranimalisalreadyaccustomedtosimilarcontainment,there
may be less training time.
READ ALL INSTRUCTIONS
PW350B
ELECTRIC FENCE ENERGIZER
Using Other Suitable Materials with
Your Power Wizard Portable Corral Kit
Suitable post materials for temporary fencing may include wood,
berglass, metal and plastic. Note that if wooden or metal posts
are used, the fence wire must be attached using plastic or porcelain
electric fence insulators.
Care must be taken to locate the posts in such a manner that when
the wire is strung from post to post, it will not touch any green
growth or the shock will be reduced.
Suitable wire can include the lighter gauges of galvanized steel
or aluminum wire, the polywire with interwoven stainless steel or
aluminum strands, or the plastic highly visible tape style, also with
interwoven stainless steel or aluminum strands.
Ifawirespliceisnecessary:
for best conductivity, be
certain to use a reef knot
when connecting two polytape wires together.
HighPerformanceFence Energizer with 4 internal D-cell
batteriesorexternal6-12Vbattery.Powersupto35acres
or15milesofmulti-wireovergrownfence.
Top Cover
Catch
LiveTerminal FenceWire/Tape
Connector
Ground Terminal
and Post Clamp
Live Area
MountingPost
Recess
External Battery
Connection
LEDPulseLight
Indicator
On/Offand
Control Switch
89

STEP 6
Animal Training
You are now ready to lead your animal to your Power Wizard
Portable Corral. Walk your animal around the perimeter of the corral
to familiarize the animal to the new surroundings.
Itisimportantthatananimal’srstexperiencewithanelectricfence
shock is one of respect or fear. Some animals require more than one
shock experience for lasting respect of the fence line. Always train
theanimaltothefencebyinsuringthattheanimal’srstapproach
to the fence is slow and that an effective repelling shock is experi-
enced.
Ifyouranimalisalreadyaccustomedtosimilarcontainment,there
may be less training time.
READ ALL INSTRUCTIONS
PW350B
ELECTRIC FENCE ENERGIZER
Using Other Suitable Materials with
Your Power Wizard Portable Corral Kit
Suitable post materials for temporary fencing may include wood,
berglass, metal and plastic. Note that if wooden or metal posts
are used, the fence wire must be attached using plastic or porcelain
electric fence insulators.
Care must be taken to locate the posts in such a manner that when
the wire is strung from post to post, it will not touch any green
growth or the shock will be reduced.
Suitable wire can include the lighter gauges of galvanized steel
or aluminum wire, the polywire with interwoven stainless steel or
aluminum strands, or the plastic highly visible tape style, also with
interwoven stainless steel or aluminum strands.
Ifawirespliceisnecessary:
for best conductivity, be
certain to use a reef knot
when connecting two polytape wires together.
HighPerformanceFence Energizer with 4 internal D-cell
batteriesorexternal6-12Vbattery.Powersupto35acres
or15milesofmulti-wireovergrownfence.
Top Cover
Catch
LiveTerminal FenceWire/Tape
Connector
Ground Terminal
and Post Clamp
Live Area
MountingPost
Recess
External Battery
Connection
LEDPulseLight
Indicator
On/Offand
Control Switch
89

Driveonehalfofthelengthofthegroundrod(energizerhanger)
intotheground,leavingtheotherhalf above ground.Locatethe
ground rod outside of the corral and away from the corral and
animals(seeFigureGbelow).
HangthePowerWizardPW350Benergizerandactivateaccordingto
fenceenergizeroperationinstructions(seePage9-13).
Pourwateraroundgroundrod(ifyoursoilconditionsareverydry
orsandy).
Bottomwiremaybemade“hot”byattachingtophotwiretothe
bottom wire using the included jumper wire.
DONOTconnecthotwiresto
the ground system.
Check fence operation with
supplied tester. To test your
fence: push wire probe into
moist soil. Touch fence wire
withbrasspoint.Lightswill
indicate the peak pulse volt-
age.
SAFETY CONSIDERATIONS
IMPORTANT – READ THE FOLLOWING SAFETY CONSIDERATIONS
CAREFULLY:
1.WARNING:DONOTCONNECTENERGIZERSIMULTANEOUSLYTO
A FENCE AND TO ANY OTHER DEVICE SUCH AS A CATTLE OR
POULTRY TRAINER. OTHERWISE, LIGHTNING STRIKING YOUR
FENCEWILLBECONDUCTEDTOALLOTHERDEVICES.
2.CAUTION:RISKOFELECTRICSHOCK.Donotinstallwheresmall
children, the elderly or unhealthy persons may come in contact
withtheliveportionsofelectricfencing.Useelectricfencewarn-
ing signs wherever humans may come in contact with the fence.
3.NEVERelectrifybarbedwireorloosefencingmaterialsthatrisk
entanglement of a human or animal. Exposure to continuous or
multiple shocks is very dangerous.
4.STAYAWAYfromthefenceenergizerandfromthefenceline
just before and during lightning storms.
5.FOLLOWallnational,stateandlocalregulationsthatmayapply
to installation of electric fence.
STEP 5
710
6.REFERTOAUTHORIZEDREPAIRCENTERFORSERVICE.Thereare
no user serviceable parts. Never alter the design of the energizer.
Doingsoishazardousandwillvoidthewarranty.
7.NEVERputmorethanoneenergizeronafence.Doingsoisdan-
gerous because it may reduce time off between pulses, may dam-
age the energizer and will invalidate the warranty.
8.DONOTrunfencewireabovegroundnearhighvoltagepower
lines.Iftooclose,theelectricfencemaypickupdangerouslevels
of power from the high voltage lines. Never cross under a high
voltage line with electric fence.
9.ALWAYSmaintainanadequategroundsystemsecurelyattached
to the energizer.
10.NEVERchargeabatterythatisconnectedtoafenceenergizer.Al-
ways disconnect the battery from the energizer before charging.
KEYS TO SUCCESSFUL
ENERGIZER INSTALLATION
Take care of the following details and you will save many hours of
labor and time.
1. UsetheenergizerprovidedwiththisPortableCorralKit.Using
a fence energizer that is underpowered for the fence condition
and application could render your fence ineffective.
Jumper
Wire
Wire
from
energizer
to top
strand of
polywire
Ground
Rod
Figure F. Energizer
mounted on ground rod.
Figure G. Fence and energizer setup.

STEP 4
Installthebalanceofthelinepostsandattachinsulatorsandwire.
Insulatorsshouldbeplacedsothatthewirewillbetowardtheinside
of the corral.
Once you have all posts,
insulators and wire in place,
adjustment of the corner
tie-downs may be necessary.
ROUND CORRAL
2. Carefully install the ground system according to the directions
includedinthismanual.Mostelectricfencingfailuresaredueto
improper grounding.
3. Take time to properly connect leadout wire, ground wire and
fence line splices. This is the second most common cause of elec-
tric fence failure. Use clamps, split bolts and taps if necessary
(notincludedwiththiskit).Makesure allconnectionsurfaces
are of bare shiny metal.
4. When using wire for fence and earth connections, use ade-
quately insulated hook-up or underground wire (rated for at
least20,000volts)forleadoutwirestogroundandfenceand
anywhere the hot wire must travel underground. Never use
standard household insulated wire, which is generally rated at
only600voltsorless.
5. Maintainproperdistancesfromburiedandaboveground:util-
ity company ground rods, water pipes, metal siding and tele-
phone wire.
6. Useanelectricfencevoltmetertoperiodicallycheckthecondi-
tion of your fence and to diagnose and repair shorts, poor con-
nections and inadequate ground conditions.
11
11
611
Tieuorescentmarkingtapebetweenposts,ifdesired. 11
INTERNAL BATTERY INSTALLATION
TOOPENUNITFORBATTERYACCESS:
Pulltabbehindcoverwithngernailor
atscrewdriverandlifttopupwards.
The Power Wizard PW350B operates with
either4alkalineD-cellbatteriesoran
external6-12Vbattery.Opentopcover
androtatebackwardsuntilfree.Insert
the4D-cellsasshownwiththe
+ facing down in the left column
and the + facing up in the right
column.

STEP 3
Ifagateopeningisdesired,installanotherpostwhereyouchooseto
have the gate opening.
Attach a 3-hole activator plate at desired height as shown. Use
rubber stops to keep activator plate stationary.
Tie polywire to activator plate and stretch your wire around the
perimeter of the corral, attaching to the insulators.
Attach the key ring to the gate hook as shown. Pull polywire snug
and tie securely.
The key ring is used to prevent damage to the polywire. The top
“hot”wireisnowcomplete.
EXTERNAL BATTERY INSTALLATION
The Power Wizard PW350B is able
tooperatewithanexternal6or12V
battery. To connect the external
battery, first turn the energizer off
and remove the internal
D-cells. Connect the wires provided
to the underside of the unit using
atfemaleconnectors.
The+(plus)shouldbeonthesame
side as the control switch
andthe–(minus)ontheotherside.
Usethebatteryclips
to connect to the
corresponding terminal
of the battery.
5
5
6
6
7
7
8
8
***WARNING***
INTERNALBATTERIES
MUSTBEREMOVED
BEFOREEXTERNAL
BATTERYISCONNECTED.
512
Figure E. Gate assembly.
NOTE:Usinganexternal12VbatteryWILL MORE THAN DOUBLE
the output energy of the energizer. Gate
Handle
Key
Ring
Rubber
Stops
Activator
Plate
Figure D. Gate components.

STEP 2
Attach2bluntrodswithconnectors*tocompletecornerposts.
Attach screw-tight insulators at desired height.
Tightensecurely.Heightwillbedeterminedbytheanimalsyouare
putting in the corral.
Drivetie-downstakeatcornerswithdrivecap.
Tie cord to stake and hammer stake into ground. At the other
end of the cord, make a loop and knot and loop over top of posts as
shown. See Figure B.
A round corral may not need any tie-down stakes. See Step 4 on
Page6foranillustration.
POST MOUNTING METHOD
The Power Wizard PW350B will be mounted to the metal ground
rod(energizerhanger)includedwiththiskit.Hangtheenergizer
on the post using the channel located on the back left of the
energizer.
LoosenthePostClamp/GroundTerminalKnob(A)toallowthe
post to slide into place. Follow the guide to the right for
specicpostlocation.
TightentheGroundTerminalKnob(A)toclampthePW350Bto
the post.
1
1
2
2
3
3
4
4
1/2 inch (10-12mm)
furnished ground rod
goes in this channel
413
Figure B.
Cord looped
over stake.
Figure C.
Posts
connected by
ferrules
(connectors).
Figure H. Energizer attached
to ground rod.
*NOTE:
Twist rods
totinto
connectors
properly.

Fence Energizer Operation
See Page 9-13 for detailed instructions on connecting the Power
Wizard PW350B Electric Fence Energizer to your Power Wizard Por-
table Corral Kit.
INSTALLATION
STEP 1
Drive one pointed rod 8” to 12” into the ground at each corner,
approximately 30 feet apart, using the included drive cap to prevent
splintering. Enough polywire is supplied to build a 30-foot square,
2strandcorral.
Aroundcorralispreferredbymanyhorseenthusiasts.SeeStep4on
Page6foranillustrationofthisconguration.
POWER WIZARD PW350B
SPECIFICATIONS AND FUNCTIONS
ThePW350BhasanLED(lightemittingdiode)onthefrontoftheunit.
Whentheenergizerisrunning,theOn/Offknobisusedtosetthepulserate
andcanbeadjustedatanytime.TheLEDashesonceforeverypulse.
Ifthesupplyvoltagedropsbelowapproximately3.1V,theLEDstartsto
blinkrapidlywithweaklightashes.Thisindicatesthebatteryislow.
TECHNICAL DATA
Power Source: Internal4X1.5ValkalineD-cellbatteryor
external6or12Vbattery
Current Consumption: Approx.20-40mAdependingonoperating
conditions
Pulse Rate: 20-60pulsesperminute(useradjustable)
Output Energy: 70-360mJdependingonoperatingconditions
at 500 ohms
Operating Temperature: 14to122˚F(–10to50˚C)
POWER WIZARD PW350B
BATTERY LIFE TABLE
This table shows the averagebatterylife whenusing4D-cell alkaline
batteries. NOTE:40pulsesperminuteisacommonsetting.
NOTE: Battery life will be shortened at colder temperatures.
30’
30’
PW350B
3
weeks
4
weeks
5
weeks
6
weeks
9
weeks
60 50 40 30
Pulses Per Minute20
314
Drive Cap
See Figure A
below.
Figure A.
Drive cap, fiberglass post
and rubber mallet.
TROUBLESHOOTING
Iffencevoltageislessthan2000V,checkthesebeforecallingservice:
• Checkthattherearebatteriesintheenergizerandtheyareinserted
correctly. Note the battery icons located on the inside of the top lid.
(seepage11forcorrectinstallationofbatteries)
• Disconnect energizer from fence and check energizer voltage only.
Voltageshouldbegreaterthan6000V.Ifless,batteriesmaybelow.
• Checkyourgroundrodinstallation.
• Checkyourconnectionstotheenergizer.
• Checkyourconnectionsatthegroundrod.
• Ensurethattheenergizerisonandashing.
If you are still having problems, please call
Customer Service at (800) 866-2161
20

CONSTRUCTION
Posts
Care must be taken to locate the posts in such a manner that when
wire is strung from post to post, it will not touch any green growth
or the shock will be reduced.
Fence Wire
Suitable wire for your portable corral is the polywire that has been
includedwiththiskit.ItisPowerWizard’shighlyconductive3strand
polywire, which features a mixture of tinned copper and stainless
steel conductors, twisted in a special UV protected polyethylene-
weave.
Ground Connections
The effectiveness of an electric fence is reliant on the proper instal-
lation of the ground system. The ground rod, which also holds the
energizer,isa24”metalrod,whichisincludedinthiskit.Theground
rod should be driven into moist ground as far as possible.
Ifthesoilisverydryorsandy,thecurrenttravelingthroughtheani-
mal and back to the ground system may limit the effectiveness of the
corral. Pouring a good amount of water around the ground rod can
help in dry soil conditions.
The best method of correcting for poor soil conditions is to string
another fence wire all the way around, above or below the hot wire,
dependingonyouranimal’sheight.Thiskitcontainstheextramate-
rial to add this ground wire when needed. Do NOT allow this wire
to accidentally touch any of the charged wires or there will be no
shock.
Using this method allows the animal to receive a shock when it
touchesBOTHthegroundANDanyofthechargedwires.Iteffec-
tively increases the shock capability of the fence, since the animal
willbegroundedinTWOways–throughthesoil(evenifitconducts
onlyslightly)–andthroughtheadditionalgroundwire.
POWER WIZARD WARRANTY
30 DAY SATISFACTION GUARANTEE
AgraTronix guarantees your complete satisfaction with this Power Wizard
Portable Corral Kit, including the Power Wizard PW350B Electric Fence
Energizer.Ifyouarenotsatisedwiththisproduct,youcanreturnthekitto
the original place of purchase within 30 days of purchase for a full refund.
Proof of purchase is required for a full refund.
LIMITED WARRANTY
AgraTronix warranties this Power Wizard Portable Corral Kit and Power
Wizard PW350B Fence Energizer to the original purchaser for a period
of two (2) years from the date of purchase, when installed and used in
accordancewiththeenclosedinstallationinstructions.Youmustretainyour
receipt for proof of purchase. This warranty covers defects in materials and
workmanship for both the parts and the fence energizer. The warranty also
covers damage to the energizer caused by lightning.
TO MAKE A WARRANTY CLAIM
1.Firstdisconnectenergizerfromfenceandconrmthatvoltageoutput
at the energizer terminals is not normal, using an electric fence volt
meter.
2.Attachanoteshowingyourname,returnaddress,phonenumberand
a brief description of the problem.
3. Pack product carefully in oversized carton with crushed newspaper for
cushioning.
4.Yourproductshouldbeshippedprepaidandinsuredagainstshipping
loss or damage.
5. Before returning products under warranty, you must call Power Wizard
at (800) 866-2161 to obtain a Return Goods Authorization number and
a shipping address for the service center that will process the return.
TheRGAnumbermustbewrittenontheoutsideofthecarton,nearthe
shipping label.
2 15
TERMS THAT APPLY TO BOTH THE
GUARANTEE AND WARRANTY
Improperinstallation,misuse,neglectandtamperingofanykindareNOT
coveredunderthe30-DayGuaranteeortheLimitedWarranty.Nowarran-
ty other than the above is express or implied. Implied warranties of mer-
chantabilityandtnessforaparticularapplication, are hereby disclaimed
unlessthelawspecicallyprecludesthisdisclaimer.Themanufacturerand
seller have no liability for damages, incidental or consequential, result-
ing from or caused by any failure, malfunction or defect of any product.
The sole obligation of AgraTronix shall be limited to repair or replacement,
at its option, of the defective fence energizer or part and prepaid return to
the owner.

The Power Wizard Portable Corral Kit features the PW350B Electric
Fence Energizer. This battery-operated energizer is capable of
powering about 35 acres of properly installed fence, provided an
adequate ground system is installed.
All of the components necessary to build your Power Wizard Portable
Corral are included in this kit, except the following:
THINGS YOU WILL NEED
• Rubbermalletorahammer
• Four D-cell alkaline batteries for the Power Wizard PW350B
ElectricFenceEnergizerORone6or12Vexternalbattery
Table of Contents
CONSTRUCTION
Posts .................................................................................................. 2
Fence Wire........................................................................................ 2
Ground Connections ....................................................................... 2
Fence Energizer Operation ............................................................. 3
INSTALLATIONOF
POWERWIZARDPORTABLECORRALKIT ......................................... 3-8
ANIMALTRAINING ................................................................................ 8
USINGOTHERSUITABLEMATERIALS ................................................... 8
ENERGIZERINSTRUCTIONS ............................................................... 9-14
TROUBLESHOOTING ............................................................................ 14
WARRANTY .......................................................................................... 15
WARRANTYCLAIMS ............................................................................ 15
CONTENTSOFTHISKIT ....................................................................... 16
POWER WIZARD PORTABLE CORRAL KIT
CONTENTS
1 PowerWizardPW350BElectricFenceEnergizer
Requires 4 alkaline D-cell batteries (not included)
12 54”FiberglassPosts(3piecesperpost)
consistingof:12pointedsections,24bluntend
pieces,25tubular-shapedconnectors(ferrules)and1drivecap
1 SpoolofPolywire,275feet
25 I-15YRScrew-TightRoundPostInsulators(Yellow)
1 JumperWire
4 CornerStakesandTie-DownCords
2 GateHandleswithConnectingHardware(2ActivatorPlates,
4RubberStopsand2KeyRings)
1 24”GroundRod/EnergizerHanger
1 RollofFluorescentFlaggingTape
1 PowerWizardT-7FiveLightFenceTester
1 DuffelCarryingBagwithD-Rings
1 InstallationInstructionManual
1 ReplacementPartsOrderForm
(800) 866-2161
www.powerwizardinc.com
04-0358-00 1-09
PORTABLE CORRAL KIT
INSTALLATION INSTRUCTIONS
PartNo.PLK-1
10375StateRoute43
Streetsboro,Ohio44241USA
330-562-2222•Fax330-562-7403
Table of contents
Popular Fencing & Gate manuals by other brands

Zippity
Zippity BURBANK ZP19071 Assembly instructions

CertainTeed
CertainTeed CertaWrap Installation guidelines

Ares
Ares Citadel Panel installation instructions

Fortress Technologies
Fortress Technologies INSPIRE installation instructions

BFT
BFT RANCH B 219/500 Instructions for installation

Horizont
Horizont 14623 Assembly instruction

Zippity
Zippity Huntersville ZP19036 Assembly instructions

Casanoov
Casanoov KIT-000029 manual

New England Arbors
New England Arbors Country Corner Picket VA20234 Assembly instructions

CGS
CGS Nationwide Industries PROTECTOR NW6149 Installation, adjustment and maintenance instructions

helo sports
helo sports M-00011 Mounting instruction

Casanoov
Casanoov DO 370C140 instruction manual