
POWERBX, Inc. www.POWERBX.com 4111 Citrus Ave. #12 Rocklin, CA 95677 1-888-500-9242
WALL MOUNT SCREWS
COVER NOTE: Attach Wall Mount so that the
WALL MOUNT POWER backside of mount is at least 1/4" away
INPUT from nearest wall or window.
CABLE
POE-Link
LED POWER
CABLE
BASE BASE
SCREWS
AUDIO CABLE
Step 1: Rotate bottom of Cover away from Step 2: Attach Wall Mount to window frame using supplied
Base and then pull Cover up. #8 Self-Tapping Screws. Then attach Ethernet, Power Input (USB/
Tablet), and Audio cables to POE-Link Adaptor. Place POE-Link inside
Wall Mount, and then attach Base to Wall Mount using supplied
#6-32 Base Screws.
POWER
INPUT
CABLE
AUDIO TABLET
CABLE (Supplied by Customer) COVER SCREWS
Step 3: Let the cables hang and replace Step 4: Attach Power Input Cable and Step 5: Secure Cover using supplied
the Cover by positioning studs on inside Audio Cable to Tablet. Insert Tablet and Cover Screws. Do not over tighten.
of Cover into the slots on the top of the position on Base. Then rotate the Cover
Base. into place as shown.
POWERBX, Inc. Side Mount Installation Instructions 2 of 2