POWEROLOGY PCFRCMBK User manual
MODEL: PCFRCMBK
1080P FHD
CONFERENCE WEBCAM
Thank you for choosing our latest webcam! It is transferred to your
computer for use via USB. Its advantages are reflected in its high
resolution, fast transmission rate, beautiful appearance, and easy
to carry. It's a great solution for online video office requirements,
and also allows you to share the fun with family and friends online!
Know Your Product
➀
➁ ➁
➂
➃
➄
➅
①Webcam ②Remote control ③USB2.0 cable
⑤User manual
When opening the package, please check and confirm all the
accessories that should be provided.
Package Contents
①Full HD 1080P lens
③Image indicator
④Mute indicator
⑤Tripod screw hole
②Dual digital microphone
⑥Type-C connector
⑧Microphone mute button
⑨Privacy protection switch
⑦Speaker
➆
➇
➈
Product Description
Product Parameters
H721CModel
Picture Parameters Full HD 1080P/ 2 mega pixels
Frame Rate 30fps
Field of View 90°
Image Focal Length 50cm to infinity
Focus Type Fixed focus
Speaker Parameters 5W
Microphone Dual digital microphones
Pickup Distance Enhanced sound pickup 3-5m
Privacy Protection Built-in slide privacy protection
Noise Reduction Support AEC, AI noise reduction
Line Length 1.8±0.02M
Protocol UVC，UAC
Connection Driver-free, plug-and-play
1. Indicator lights.
①Image indicator: out of the picture state light blue, not out of
the image, the blue light is off.
②Mute indicator: the mute state lights up red, and the red light
goes off when normal pickup.
System Requirements
Windows XP/ VISTA/ Win7/ Win8/ Win10/ Win11
Linux 2.6.24 and above
Ubuntu 14.04 and above
Mac OS 10.6 and above
Product Installation Instructions
1. Place Your Webcam
Place the webcam where you want it - on a computer
display, desktop or a tripod.
Note: This product does not contain tripod, please purchase
if necessary.
2. Mute switch button: Press to mute microphones, re-press to
unmute (According to mute indicator status)
3. Port: USB 2.0 port.
4. Privacy protection cover: built-in privacy protection cover,
push the built-in privacy protection switch, can physically block
the lens to protect privacy.
2. Connect the Webcam
Connect the camera to the computer via the USB
interface.
Warm Tip: When using a desktop, it is better to
connect the webcam to the USB interface on the back
of the computer, The power supply is more stable.
3. When installation is finished, you can start using.
For Placement on the Display:
Open the webcam clip, and follow the steps and methods show
in the figure to place the webcam on top of the display, please
make sure the clip is firmly mounted.
Zoom out
Return
1. There is a insulation plastic with battery, it need to be
removed for first use.
2. The direction move function only work when the image
under zoom-in
3. The front end of the remote control should face the
camera front for use
Remote diagram
Up
Left
Presentation
switch
Zoom in
Mute
Right
Insulation
plastic
Battery
cover
Down
1. Do not use it in hot, cold, dusty or humid circumstances.
2. Avoid touching the lens with hands, sharp or coarse
stuff; please use clean and soft cloth for cleaning.
3. Avoid falling as much as possible. Severe falling may
cause damages to the lens, malfunction or scratches to
the surface.
4. The maximum resolution is 1920*1080.
5. Most third-party software will automatically adjust the
resolution according to the network speed
Notice
1. This product is warranted by non-human factors. What
the warranty does not cover:
•Man-made damage.
•Repair or disassembled by other company's technicians.
•Damage due to dropping or impact.
2. Any problems, you can contact the seller to get the
best solutions.
Warranty
(Information contained herein is subject to change without notice. Windows is
a trademark of the Microsoft group of companies. Mac is a trademark of Apple,
Inc., registered in the U. S. and other countries.)
powerology powerology.me
hey@powerology.me|www.powerology.me
Table of contents
