Premier SX-0541CD User manual

INSTRUCTION MANUAL
Radio – Cassette Recorder W/CD
SX-0541CD
DEAR CUSTOMER
In order to achieve the best performance of your product, please read this instruction manual carefully
before using, and keep it for future reference.
If you need extra support, please write to in[email protected]

P-1
CAUTION
RISK OF ELECTRIC
SHOCK, DO NOT
OPEN
Caution: To reduce the risk of electric shock do not open
this device, there are not serviceable parts for customers.
Please refer any maintenance or repair to qualified
personnel.
This sign means the existence of dangerous voltage at
the inside of the unit, which states a risk of electric shock.
This sign means that there are important instructions of
operation and handling in the manual that comes with this
device.
PREMIER CUSTOMER SERVICE
Venezuela: 0800 – ELECTRIC (353-2874)
Panama: 300-5185
Website www.premiermundo.com
E-mail: [email protected]
NOTE
This unit may be submitted to changes in specifications, characteristics and/or operation without prior
notice to the user, in order to continue improving and developing its technology.

P-2
WARNING
TO PREVENT ELECTRIC SHOCK; DO NOT USE THIS PLUG WITH AN EXTENSION CORD
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADES EXPLOSURE.
TO PREVENT FIRE OR SHOCK HAZARD; DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
The lighting flash with
arrowhead symbol,
with an equilateral
triangle is intended to
alert the user to the
presence of un-
insulated dangerous
voltage within the
products enclosure that
may be of sufficient
magnitude to constitute
a risk of electric shock
to persons.
CAUTION
The exclamation point
within an equilateral
triangle is intended to
alert the user to the
presence of important
operating and
maintenance (servicing)
instruction in the literature
accompanying the
appliance.
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
CAUTION: TO
REDUCE THE RISK OF
ELECTRIC SHOCK,
DO NOT REMOVE
COVER (OR BACK).
NO USER
SERVICEABLE PARTS
INSIDE REFER
SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
LASER SAFETY
This unit uses a laser. Only a qualified
service person should remove the cover
or attempt to service this device to avoid
possible eye injure.
Caution: USE OF CONTROLS OR
ADJUSTMENT OF PERFORMANCE OF
PROCEDURE OTHER THAN
SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DANGER:
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCK
FAILED OR DEFEATED. AVOID
DIRECT EXPOSURE TO LASER
BEAM.

P-3
LOCATION OF CONTROLS
1. Volume Control Knob 18. CD Program Button
2. Open CD Door Button 19. CD Skip/Search Forward Button
3. Carry Handle 20. CD Skip/Search Backward Button
4. FM Antenna 21. Power Indicator
5. Cassette Stop Button 22. CD LED Indicator
6. Cassette Play Button 23. Cassette Compartment
7. Cassette Forward Button 24. Repeat Indicator
8. Cassette Rewind Button 25. Play/Pause Indicator
9. Cassette Record Button 26. Function Switch
10. Cassette Eject Button 27. FM Stereo Indicator
11. CD Door 28. Band Switch
12. CD Play/Pause Button 29. Stereo Headphone Jack
13. CD Repeat Button 30. Battery Door
14. CD Stop Button 31. AC Socket
15. Dial Pointer 32. AUX/MP3-IN
16. Tuning Knob 33. Voltage Selector
17. Speakers
AC OPERATION
Before operation, please make sure that the VOLTAGE on the set corresponds to the VOLTAGE of your local
area. Unravel the AC Line Cord, insert one end into the AC socket on the set, and the other end into a standard
AC outlet.
BATTERY OPERATION
Disconnect the AC Cord Set completely. Open the Battery Compartment Door and insert UM-2 'C' size x 6
batteries (not supplied) making sure that the indicated battery polarity is observed.

P-4
RADIO OPERATION
1. Slide the Function Switch to the "Radio" position.
2. Slide the Band Switch to the desired wave-band.
3. Turn the Tuning Knob to your desired radio station.
4. Adjust the sound level by rotating the Volume Control Knob.
5. To turn off the radio, simply slide the Function Switch to "Tape" position.
FM STEREO INDICATOR
When turn to a FM stereo broadcast the "FM ST." LED Indicator will light up.
ANTENNA
For best reception, fully extend the FM Antenna to receive FM stations. For AM reception, the unit has a built-in
antenna, turn the whole unit for best reception.
AUX/MP3-IN CONNECTION
1. Insert the audio cable (requires 3.5mm stereo plug, not supplied) into the Line Out Jack or Phones Jack on
your MP3 Player/iPod into the corresponding AUX/MP3-IN Input Jack on your main unit;
2. Turn on your main unit and slide the Function Selector to AUX/MP3-IN position;
3. Make sure your AUX/MP3-IN component is turned on, and follow your component’s instruction;
4. To stop this function, simply slide the Function Selector to Tape position.
CASSETTE OPERATION
Tape Playback
1. Press the Eject Button to open the cassette door, insert a cassette tape into the Cassette Compartment
and push the cassette door to close.
2. Slide the Function Switch to Tape position and press the Play Button to start playing the tape.
3. Adjust the Volume Control Knob to your desired volume level.
4. To stop the tape, simply press the Stop Button.
Fast Forward and Rewind
The tape can be fast forward or rewind by pressing the Fast Forward Button or Rewind Button respectively.
Auto Stop System
When the tape runs to its end during playback or recording, the cassette operation will be stopped automatically.
CAUTION: To avoid damage to the cassette mechanism or to the cassette tape, always press the Stop Button
between each operation
CD OPERATION
Playing CD
Getting Start
NOTE: Should skipping of tracks occur during CD playing, try turning the volume down. When CD is playing, do
not open the CD Door.
1. Open the CD Door by pressing the CD Open Door Button. Put a CD into the CD Compartment and close the
CD Door. Set the Function Switch to "CD" position.

P-5
2. When the CD Door is closed with a CD inside, the total number of tracks will be shown on the CD LED
Display and it will go to "Stop" mode.
3. If the CD Door is not closed or there is no disc inside and it will go to "Stop" mode.
PLAY/PAUSE MODE
1. When the Play/Pause Button is pressed during "Stop" mode, the first track will be played. The Play/Pause
LED Indicator will be lighted. The CD LED Display will show the specific number of tracks played.
2. For interruption while the CD is playing, press the CD Play/Pause Button once. The Play/Pause LED
Indicator will flash continuously.
3. Though the sound stops, the disc will continue to spin. To re-start playing, press the CD Play/Pause Button
once again. The music will start from the exact position where it was interrupted.
4. To stop the CD, press the CD Stop Button once whether the CD is in Play or Pause mode.
REPEAT MODE
REPEAT 1: When the Repeat Button is pressed once, the Repeat LED Indicator will light and flash continuously.
This single track will be repeated.
REPEAT ALL: When the Repeat Button is pressed twice, the Repeat LED Indicator will stay lighted. The whole
disc will be played continuously.
TO CANCEL THE REPEAT FUNCTION: Press the Repeat Button until the lighted Repeat LED Indicator turned
off.
SKIP AND SEARCH MODE
1. During Play or Pause mode, when CD Skip Forward "" or CD Skip Backward "" Button is pressed once,
it will go to the next track or go back to the beginning of the track.
2. During play mode, when CD Skip Forward "" or CD Skip Backward "" Button is pressed and held, it will
search the track with audible high speed forward or backward playback.
PROGRAM MODE
1. During the CD Stop mode, press the Program Button once and the Program LED Indicator will light up. Press
the CD Skip Forward "" or CD Skip Backward "" Button to your desired musical track, the CD LED
Display will show the appropriate track number and press Program Button.
2. Repeat above procedure until all desired tracks have been programmed. Up to 20 tracks can be
programmed.
3. To start the programmed playback, press the CD Play/Pause Button once.
4. To cancel the programmed play mode, simply open the CD Door.
RECORDING FROM CD PLAYER
1. Slide the Function Switch to "CD" position.
2. Put a CD into the CD compartment with the label on top.
3. Insert a blank cassette into the Cassette compartment and press Pause Button of the cassette deck.
4. Press Record Button and Play Button simultaneously of recording stand-by. With the built-in ALC, the best
recording quality is adjusted.
5. Activate the CD player, playing in a desired track as described in the CD Player Operation section. Release
the Pause Button of the cassette deck to start recording.
6. To temporary stop recording, press the Pause Button. To continue recording, press the Pause Button again.
7. Press Stop Button of the cassette deck to stop recording, then stop CD playback by pressing CD Stop Button
of the CD player.

P-6
STEREO HEADPHONE JACK
For private listening, insert the plug of a stereo headphone into the Stereo Headphone Jack and adjust the
Volume Control Knob accordingly. During the use of a headphone, the speakers are automatically disconnected.
MAINTENANCE
CLEANING THE TAPE HEADS
Clean the heads frequently to remove dust and tape residue. Dirt on the heads will impair the sound quality of
both recording and playback.
SPECIFICATIONS
Power source: AC 110V/220V ~ 60/50Hz
DC9V
(UM-2 x 6)
Frequency range: FM 88 - 108 MHz
AM 540 - 1600 KHz
Output Power : 5W
Specifications are subject to change without further notice.