Premier TV-1851TFT User manual
INSTRUCTION MANUAL
7
″
16:9 HEADREST WITH PILLOW LCD MONITOR/TV
TV-1851TFT
DEAR CUSTOMER
Congratulations for your purchase!
Please read this manual carefully, and keep it for future reference.
GENERAL INFORMATION
Thank you very much for your purchase of this headrest with pillow LCD Monitor. Player please read this
instruction manual and keep it for future references.
PRECAUTIONS
1. It’s made up of many precision electronic elements, and any dismantlement or refit will make it
damaged or broken.
2. When operating the unit, please avoid contacting with the LCD panel.
3. Keep it away from the place where is too hot or too cold. Operating temperature of the unit is 32-
92 degrees Fahrenheit.
4. Do not drop the monitor or impact it with hard objects. This may cause permanent irreversible
damage to the LCD panel and/or the back light element.
5. During operation, if the unit over-heat or malfunction, switch off. Do not disassemble the unit by
yourself. Please consult the company or the dealer.
6. The battery of the remote control unit has an estimated life cycle of five months. To ensure proper
functionality, replace the battery on a timely manner.
7. Do not use any chemical solvent, cleaning agent or corrosive detergent when wiping the display
INSTALLATION GUIDE
Precautions:
1. This unit should be installed by a qualified service technician.
2. This product is designed to operate with a 12V DC, negative ground battery system.
3. Disconnect the ground wire from the battery terminal prior to connecting the unit to the electrical
system
4. Please use accessories that come with this unit. In order to avoid fire or electrical damage to it.
5. This unit fit any models of car, the distance between two poles can be adjusted.
Page 1
MONITOR ILLUSTRATION
1> Video/Audio Input 2> Incept window
3> CH+ Program ascend button 4> CH- Program descend button
5> VOL+ Volume Increase Button 6> VOL- Volume decrease Button
7> MENU OSD Setting 8> AV/TV Switch from AV to TV
9> Power ON/OFF button 10> Headphone jack
REMOTE CONTROL
MUTE MUTE on/off
POWER ON/OFF switch
SLEEP Sleep time set
VIEWMODE Setting picture display dimension.
SEARCH Auto search channel
TV/AV AV/TV selection
MENU Main menu
CH+ To the next higher program (the cursor is
moved upwards)
CH- To the next lower program (the cursor is
moved downwards)
V+ Volume increase (submenu adjust)
V- Volume decrease (submenu adjust)
0~9 Digit key (0~9) and -/--
-/-- Tens digit channel select
Recall
Page 2
1. Please align the remote controller with the infrared-receiving window on TV in operation.
2. Never oppress, drop, wet or disassembly the remote controller.
3. Never press any button continuously and swiftly. Operation interval is at least 2 seconds.
4. Press power to turn on the machine before pressing P/ Pfor program channel
selection.
Notice
1. Channel (digit key 0~9 and -/--):
There are 0~99 in total of 100 channels available on the remote controller for your option by the 1
buttons of 0~9 and -/-- on the remote controller. When the channel is a one-digit figure, just press the
corresponding digit button, If the channel is a two-digit figure, you should press-/-- first to show-/ “--”on
the display screen before further pressing the corresponding digit buttons.
2. CH+/CH-(Channel selection)
1). Press CH+, The number of TV channels increases.
2). Press CH-, The number of TV channels decrease.
3.V+/ V- (Volume adjust)
1). Press VOL+, the volume of TV increase.
2). Press VOL-, the volume of TV decrease
4. Power (power switch)
Press this button is to turn off the TV. Press it again to turn on the machine. Press “MENU” in game
status is to exit game
5.MUTE (mute)
Press this button, sound disappears, press it again to resume normal sound.
6.SLEEP
Time setup of sleep off, it is used to set the tine off within 240 minutes.
8. VIEW MODE
Press “view mode” button, the following, Items are appeared:16:9 OR 4:3
9. AV/TV Selection
Press this button is to realize switch between TV/AV pictures.
Page 3
MENU OPERATION
Press MENU to display program as follows.
1. PICTURE.
Contrast. Bright. Color. Sharp and TINT display on the screen as illustrated below:
BRIGHT 35
COLOR 25
CONTRAST 30
TINT 50
Page 4
1) Press Menu to display program as follows: Brightness, Color, Contrast, Sharpness and Tint.
2) Enter into PICTURE, press CH+/CH- to select the item which need to be set and it’s indicated by
arrowhead.. Characters are in red.
3) Press VOL+/VOL- to increase or reduce the number of the selected items. It won’t work when
pressing VOL+ to the maximum number, that is “100”; It won’t work when pressing VOL- to the
minimum number, that is “0”.
4) Notes: Only NTSC color system has TINT. Other color systems don’t have this item.
2. VOLUME
Volume 33
Here is only vloume item in volume Menu. Press VOL+/ VOL- to increase or reduce its number
3. OPTION
ENGLISH
CALENDAR
GAME
DISPLAY MODE 0
ZOOM 16:9
1) Here are such functions in this Menu, as follows: Language, Calendar, Game and ZOOM.
Table of contents
