PRICOM Design Dream AMP User manual

Dream AMP
Quick Start Guide
Version 1.0
Copyright ©2012 PRICOM Design

Page 2 Dream AMP – Quick Start Guide
1 Operation
Thank you for your purchase of the Dream AMP. Below is a
simple diagram explaining how to connect your Dream AMP.
Figure 1 - Connection Diagram
2 Power
The Dream AMP can accept either AC or DC voltage. The supply
can be from 12-16 Volts AC, or 12-20 Volts DC. Simply connect
the wires to the voltage input terminal strip as depicted in the
illustration. Polarity does not matter on the Dream AMP so do not
worry about wiring the wires backwards.

Page 3 Dream AMP – Quick Start Guide
3 Connections
Voltage IN: Starting on the left side of the illustration we have a
connection for power labeled “Voltage IN” Simply wire your
power source into the screw clamp terminal strip using a small
screwdriver.
Speaker Out: The Dream AMP has connections for two speakers,
a left and a right. This allows you to create a stereo sound set-up.
Most speakers have either; red and black wire leads, and/or a “+”
and “-” symbol on them. Connecting the speakers is a simple
matter of matching the color of the speaker wire or symbol with
the color in the illustration. We use red wire for the “+” and black
wire for the “–”.
Audio Input: The source audio is provided to the AMP through a
stereo audio jack on the right side of the board. You will need an
audio patch cable to make the connection from your Dream AMP
to your audio source. Connect one end of your audio patch cable to
the AMP and the other to the output side of your source device.
You can use a PRICOM Dream Player or any other audio source,
as long as it has a stereo output.
Volume Control: A neat feature of the Dream AMP is the
on-board volume knob. With this knob you can set the output level
to whatever you desire. This knob has 270 degrees of motion. A
counter-clockwise turn makes the output softer and a turn in the
clockwise direction increases the volume.

Page 4 Dream AMP – Quick Start Guide
4 Support
If you have any questions, concerns, problems, or just need some
general assistance with your Dream AMP, please contact us and
we will be happy to help you get up and running as quickly as
possible.
PRICOM Design
2755 Slocum Rd
Peyton, CO 80831
www.pricom.com
[e-mail]