Priefert SRV2 User manual

1
VERTICAL SADDLE RACK INSTRUCTIONS
Two saddle vertical rack shown (SRV2)

2
VERTICAL SADDLE RACK INSTRUCTIONS
Rod
Saddle Rack Vertical
Base Middle (SRVBM) 3/8”x1¼” Bolt
3/8” Fastener Nut
Saddle Rack Vertical
Base Top (SRVBT)
Saddle Rack Vertical
Base Middle (SRVBM) Rod Loop
Saddle Rack Vertical
Base Base (SRVBB)
Step 1: Take the (SRVBB) and lay it flat on the ground as shown.
Step 2: Take the (SRVBM) and align the holes in the bottom plate with the holes in the plate
on the (SRVBB). Secure it with the 3/8”x1¼” bolts provided.
Step 3: Take the (SRVBT) and slide it down into the (SRVBM) until the Rod fits down into the
Rod Loop.

3
VERTICAL SADDLE RACK INSTRUCTIONS
3/8” Acorn Nut
Saddle Rack Arm
(SRA)
Saddle Rack
Bracket (SRB)
Step 4: Remove the 3/8” acorn nuts from the
(SRB), then place the (SRA) onto the bolts.
Step 5: Secure it with the 3/8” acorn nuts
previously removed.
NOTE: The next step is only required If you have
purchased the two saddle vertical saddle rack.
Step 6: Attach the (SRA) to the upper (SRB) as
explained earlier in steps 4 & 5.
Thank you for
choosing a Priefert ™
Product.