Prince PT100-00 User manual

DMI Sports For Customer Service Call 1.800.399.4402
1.800.399.4402
FAX: [phone]
Please have your model number when inquiring about parts.
Or write to:
DMI Sports
Customer Service
1300 Virginia Drive, Suite 401
Fort Washington PA, 19034
Please visit our web site at:
www.dmisports.com
When contacting DMI Sports, please provide your model number
and item number (if applicable) if requesting a replacement part.
Item numbers can be found inside this owners manual.
Congratulations on the purchase of your new Prince
Table Tennis table. Our products are designed and
manufactured to give you years of game playing enjoyment.
KEEP BOX AND PACKING MATERIAL UNTIL TABLE
HAS BEEN COMPLETELY ASSEMBLED.
ALL DAMAGE MUST BE REPORTED TO DMI
WITHIN TEN DAYS OF RECEIPT.
If you have any problems with your new product,
PLEASE DO NOT RETURN IT TO THE STORE.
Please contact us:
Your Model Number _______________________
Your model number is also located on the original carton. These instructions
are also available online at: www.dmisports.com.
PT100-00
0070108

DMI Sports For Customer Service Call 1.800.399.4402
Please Keep Your Instructions! (You will need your Model number should you need to contact us.)
Before attempting assembly, please read through this instruction book to familiarize yourself with all
the parts and assembly steps. We recommend that two adults assemble this game. Please refer to the
Parts Identier on the following page and be sure that all parts have been included.
This product is manufactured according to the ITTF standards (International Table Tennis Federation),
and includes national and international patents.
DMI Sports Inc. warranties this product for one year from the purchase date for any manufacturing or
material defect. High-density chipboard is warranted for one year from date of purchase. Although we
at DMI Sports are dedicated to giving our customers the highest quality products, occasionally a part
may be missing. If you are missing a part, or if you have any questions, please call our customer service
department at 1.800.399.4402 Mon-Fri between the hours of 9:00am and 5:00pm E.S.T; or you can reach
us at: www.dmisports.com.
Do not return the game to the store. Please contact us rst at: 1.800.399.4402 or on our website at:
www.dmisports.com.
IMPORTANT!
TWO ADULTS ARE REQUIRED TO ASSEMBLE
THIS TENNIS TABLE
-2-

DMI Sports For Customer Service Call 1.800.399.4402
TOOLS REQUIRED FOR ASSEMBLY:
• Phillips Head and Regular Screwdriver (or Electric Screwdriver) Not Included
• Wrench Set or Pliers- Not Included
• Hammer- Not Included
PARTS IDENTIFIER
HARDWARE PARTS
H1 H2 H3 H4
H5 H6 H7 H8
TTPH107
TTPHKIT1
TTPH114
TTPHKIT1
Qty. 4 Qty. 4 Qty. 2 Qty. 4
Qty. 6 Qty. 12 Qty. 4 Qty. 16
TTPH115
TTPHKIT1
TTPH117
TTPHKIT1
TTPH113
TTPHKIT1
TTPH127
TTPHKIT1
TTPH125
TTPHKIT1
-3-
TTPH126
TTPHKIT1

DMI Sports For Customer Service Call 1.800.399.4402
PARTS IDENTIFIER
ASSEMBLY PARTS
P1 P2 P3 P4
P5 P6 P7 P8
P9 P10 P11 P12
P13
Qty. 8
Qty. 8
Plastic Wheel
TTPP101
Wheel Swivel
TTPP102
Insert for Wheel Swivel
TTPP103
Support Brace
TTPM119
Net Post Support
TTPM126
1” Half Round Bracket
TTPM114
Net Post
TTPM127
Plastic Tray
TTPP121
1” Plastic Leg Cap
TTPP114
Safety Catch
TTPP109
Nylon Net
TTPP119
Table Half
TTPW100-00
Qty. 2 Qty. 2 Qty. 4
Qty. 2 Qty. 2 Qty. 1 Qty. 2
Qty. 4 Qty. 10Qty. 4 Qty. 12
Qty. 2 NOTE: Parts P12 and P13
come pre-assembled to
P8. They are only listed
here as replacement
parts should there be
a defect with them.
-4-
1” Outer Leg
TTPM122
P14 Qty. 2
1” Inner Leg
TTPM116
Pre-Assembled

DMI Sports For Customer Service Call 1.800.399.4402
12 1 /8” 12 1 /8”
18 1 /8”18 1 /8”
30 1 /16”
60 1 /8”
9 1 /2”7 1 /2”
(INSIDE EDGE OF TABLE TENNIS PLAY SURFACE)
HOLE LOCATION FOR INNER LEGS
STEP 2.(Fig. 2.1) Attach inner Legs (P14) using Half Round Bracket (P12) and Screw (H7).
Prince Recreation FSA - Code: PT100-00 - Assembly Instructions
STEP 1. Open the box and position the two play surfaces face down on the cardboard.
Note: Make sure that the two play surfaces are positioned, with the ends of the table possessing
the pre-assembled net support brackets represented in Fig 2.1, facing each other.
FIG. 2.1
-5-
Note:
If you notice any resistance in
putting the legs up, carefully
work the legs back-and-forth
until the movement in smooth.
(P13)
Pre-Assembled
(P14)
(H7) (H7)
(P14)
(P13)
Pre-Assembled
(H7)
(H7)
(H7)
(H7)
AA
AA

DMI Sports For Customer Service Call 1.800.399.4402
Prince Recreation FSA - Code: PT100-00 - Assembly Instructions
FIG. 6.1
STEP 4. (Fig. 4.1) Attach two Plastic Wheels (P1) using
(H1) and (H2) to the Wheel Brackets (P2) as shown to the left.
Once the wheels are attached, attach the wheels and bracket to the
Insert
for wheel swivel (P3). The entire unit will then be inserted into the
two Short Inner legs (P14).
Note: Keep in mind that the table is still up-side-down. So the “lower holes” referred to in
Step 6. are closer to the ground in this position.
STEP 3.(Fig. 3.1) Attach two Plastic Wheels (P1) using (H1) and (H2) to both Long Inner legs
(P14) as pictured below. Fig. 3.1 represents both inner legs.
FIG. 3.1
FIG. 4.1
FIG. 5.1
STEP 5. (Fig. 5.1) Insert the Plastic Leg covers (P11) in the
Outer Legs (P13). Gently hammer into place if needed.
Fig. 5.1 represents all outer legs.
(P1) (H1)
(H1)
(P2)
STEP 6. (Fig. 6.1) Attach the two Plastic Trays (P9) through the lower holes of the inner legs using
(H6) and (H8) to the two lower Interior legs as shown above. (Repeat on the other side) Secure the top two
holes by placing one end of the Support Brace (P4) over the top holes of the Plastic Tray and attaching them
to the Interior Leg using (H6) and (H8) as shown in FIG. 6.1. Attach the other end of the Support Brace to the
Exterior Leg using (H4) and (H5). Now secure the Plastic Tray by adding two (H6) and (H8) hardware parts.
(P13)
(H5)
(H4)
(P4)
(H8)
(H8)
(H8)
(H8)
(H6)
(H6)
(H6)
(H6)
(H6)
(P9)
(P14)
(H2)
(P11)
(P13)
(P1)
(H2)
(P14)
(P3)
IMPORTANT
The Support Brace (P4) must
be attached with the raised
side facing out. If placed the
other way, the brace will
damage the table when folded
and void your warranty.
(P4)
Support Brace
-6-

DMI Sports For Customer Service Call 1.800.399.4402
Prince Recreation FSA - Code: PT100-00 - Assembly Instructions
STEP 7. Before you turn the table over, attach the two
Net Post Supports (P5) to the holes in the
Side Aprons at this time.
STEP 8.(Fig. 8.1) Make sure that all hardware is tight. (DO NOT OVER TIGHTEN) With two adults, turn
the table over. Don’t try to pick it up. Roll it over until upright. Being careful not to let table fold
in half. STEP 9.(Fig. 9.1) Attach the Safety Catches (P10) to the
Interior legs (P14) using holes just above trays (P9). Screw nut to
Safety Catch (P10) but do not tighten to legs. These
must be loose enough to swivel and catch the table as it is moved
upright.
STEP 10.(Fig. 10.1) At-
tach the Net Post (P6) to the Net
Post Support (P5) using (H10)
and (H5) as shown in FIG. 10.1.
Once the Net Post is secured, you
can attach the Nylon Net (P7).
NOTE: the Nylon net may ap-
pear too small to reach the posts.
Simply stretch the net until it slides
on the posts.
FIG. 7.1
FIG. 7.1
FIG. 9.1
FIG. 10.1
(P5)
(H8)
(H7)
(H8)
(H7)
(P10)
(H10)
(P6)
(H5)
(P5)
-7-

DMI Sports For Customer Service Call 1.800.399.4402
RECOMMENDATION OF USE AND PRECAUTIONS
!
Anyone using or handling this table tennis table must always follow the illustrated instructions attached
to the back of the board and be fully aware of the operation instructions.
1. Handling the table, (Assembly, open, close or to store) should always be done by two adults to prevent
accident or injury.
2. Be sure that no persons or objects are in the way of the boards when opening the table.
3. Do not put heavy objects on the table.
4. Do not sit on the table.
5. Do not clean the table with solvents or any other aggressive product because it could damage
the paint finish.
6. Do not use sharp objects on the board or painter surface.
7. If the table is used for purposes other than playing table tennis, cover the surface to prevent any
damage.
8. Request proof of purchase and keep it during the warranty period.
9. Under no circumstances is the manufacturer responsible for direct or indirect damages
including loses of benefits or any other commercial damage occurred by the use of the purchased
product.
10. The functioning and storage of this product should always be supervised by an adult.
11. Do not store or handle the table on an unstable floor surface.
12. If safety device malfunction occurs, secure table tops until the problem is solved.
13. To extend the life of this product, (outdoor table or indoor table) protect it from moisture
or severe climate changes.
14. Use only the net system supplied. For replacements please contact customer service at: 800.399.4402
and ask for Net Post TTPM126, Net Support TTPM127 and Nylon Net TTPP119.
Care and Maintenance
Cleaning your table
Use a soft damp (not wet) cloth only. DO NOT USE ANY CHEMICALS, ABRASIVE OR CLEANING PRODUCTS
on the playing surface.
Maintenance of your table
All moving parts must be oiled including the pivot points. This will insure ease of use and safety of your table.
This table must be stored indoors to avoid damage to the surface. The dampness and temperature changes can
cause wood to warp, swell or blister.
-8-

DMI Sports For Customer Service Call 1.800.399.4402
APPLYING LABELS
The very last step in completing the assembly of your new Prince Table Tennis table involves applying
the labels to the proper locations on the table. There are two types of labels to be applied.
#1 is the Style label. There are four style labels. Each of the four labels are applied to the four corners
of the tables side as shown below.
#2 is the Plastic Tray label. There are two tray labels. One of each of these labels will be applied to
each plastic tray on your table.
The labels represented here are not of actual size or color.
Note: It is recommended that you write the model number on the under-side of this table for future
reference.
#1
#2
#1
#2
-9-

DMI Sports For Customer Service Call 1.800.399.4402
REF
TTPHKIT1
TTPHKIT1
TTPHKIT1
TTPHKIT1
TTPHKIT1
TTPHKIT1
TTPHKIT1
TTPHKIT1
TTPP101
TTPP102
TTPP103
TTPM119
TTPM126
TTPM127
TTPP119
TTPW100-00
TTPP121
TTPP109
TTPP114
TTPM114
TTPM122
TTPM116
TT100LABELS
TTPH115
TTPH117
TTPH126
TTPH127
TTPH113
TTPH125
TTPH107
TTPH114
Plastic Wheel
Wheel Swivel
Insert for Wheel Swivel
Support Brace
Net Post Support
Net Support
Nylon Net
Table Half
Plastic Tray
Safety Catch
Plastic Leg Cap
1” Half Round Bracket
1” Outer Leg
1” Inner Leg
Recreation Label Sheet (1 of 2)
UNIT PRICE TOTAL AMOUNT
Subtotal:
Shipping and Handling Charges:
(PA Residents Add 6% State Sales Tax) TOTAL:
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
PARTS RE-ORDER FORM PT100-00 Table Tennis Table
DATE:
NAME:
ADDRESS:
CITY:
PHONE:
STATE: ZIP CODE:
Send this form along with your
check or money order payable to:
DMI SPORTS
1300 Virginia Drive, Suite 401
Fort Washington, PA 19034
www.dmisports.com
SHIPPING AND HANDLING:
Up to $15.00 add $2.00 for S&H
Over $15.00 CALL
1.00
1.00
.50
.50
.50
.50
.50
.50
2.50
2.50
.50
10.00
5.00
10.00
9.50
175.00
7.50
5.00
1.00
3.00
15.00
15.00
4.50
H1
H2
H3
H4
H5
H6
H7
H8
P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
P11
P12
P13
P14
PART# DESCRIPTION
QTY