Prisma Bytes PB02-GY-W User manual
PB02GYW
USER MANUAL
Page 2of 10
Table of Contents
Chapter 1: Product Description ............................................................................3
Chapter 2: Installation..........................................................................................4
Chapter 3: Software Installation and Configuration ..........................................5
3.1 Platform .........................................................................................................5
3.2 Log in.............................................................................................................5
3.3 Add Device .....................................................................................................6
3.4 Device Configuration .......................................................................................7
3.5 Import Face Library.........................................................................................8
Management Software Download..............................................................9
Contact Reference..................................................................................... 10
Page 3of 10
Chapter 1: Product Description
1.1 Product Introduction
Use 12V DC - 2 Amp Power supply - Using a wrong PSU will result malfunction
of the device and void warranty . Power supply not supplied with the device , To
be procured locally. Any assistance needed contact support @prismabytes.com
Front Panel
Rear Panel
Cabling Interface
Page 4of 10
Chapter 2: Installation
2.1 Gate Installation
2.1.1 Open a hole with a diameter of 35mm on the fate, and the
recommended position is 1/3 to ¼ from the entrance end;
2.1.2 Insert the equipment mounting bracket into the opening of the gate
and fix the equipment nut from the inside of the gate;
2.1.3 Adjust the device to a suitable angle, between 5o–15overtical.
2.1.4 Ensure to connect the device using Ethernet cable at the RJ45 Network
Interface before power on.
Page 5of 10
Chapter 3: Software Installation and Configuration
3.1 Platform
3.1.1 Under the Windows Operating System, double-click
“SPD2000_VX.X.X.exe (X is the version number), enter the installation
password “123456”, click “Next”, and follow the prompts to perform the
installation;
3.1.2 After the installation is complete, the desktop creates shortcut of
SDP2000 Server platform icon
3.2 Log In
3.2.1 Double-click on the desktop ; to enter the login interface via Internet
browser. (Google Chrome or Firefox browser is recommended).
3.2.2 Enter the user name “user”, password “12345”, and click “Login” to log
in to the LAN platform.
Page 6of 10
3.3 Add Device
3.3.1 After logging into the platform, select “Device” and “Scan Device”.
3.3.2 Select the device, click “ “ to modify the device IP and click “Submit”.
Factory default values of the device as following:
•IP Address: 192.168.1.88
•Pasword: 12345
•Port: 7080
Page 7of 10
3.3.3 Select the device and click “” or “Add”, select the area, and click
Set.
3.4 Device Configuration
After logging in to the platform, enter the “Device” interface and click “ “
to configure the basic parameter and other parameter of network, remote,
function and delete the device.
Page 8of 10
3.5 Import Face Library
3.5.1 Import personnel images in batches. Login into the platform, click
“Personnel – Personnel –Import Personnel images in batches” – select
pictures –“Upload” and the pictures are added into the device.
When importing pictures in batches, the pictures must meet the
following requirements:
•Picture naming format can be set as: name.jpg, name_department
name.jpg, name_department name_personnel number.jpg (the
department name is existing in the system; the personnel number
must be unique).
•Ensure a clear face picture and the total size should not exceed
80MB.
3.5.2 Click “Import personnel in batches- batch add people templates.xls”,
download “Templates”, enter personnel information in the template
according to the picture, then save the template, click “Import”, and
import the saved personnel information template.
Page 9of 10
3.5.3 After the gallery is added into the device, system will start face
recognition algorithm to identify the user.
Measurement distance between: 0.5 –1.0 m, 0.75 m is the best. It is
recommended to mark the measure level on the floor.
Management Software Download:
Page 10 of 10
CONTACT US:
Any further assistance needed pls contact your sales POC , Local Distributor or
www.prismabytes.com
Table of contents
