Pro Armor A51040 Manual
Operators
Guide
Pro
Armor
Sound
Bars
Congratulations
on
your choice
of
Pro Armor Sound Bars.
This "Quick Start" Installation guide is meant to help you
complete a basic installation. For more detailed information
about the product, please visit our website at ProArmor.com
Wiring
The wiring and connections should
be
secure and away
from any moving parts or extremely hot surfaces.
Oran e - Remote
In
Black -Ground
Blue -Remote Out
3.5mmAUX
IN
AUDIO OUTPUT
Controls
0 Power -Will turn the unit on or off. I Three second press will switch audio inputs.
E)PLAY i PAUSE -Press once to pause. Press again to play.
E)Volume DOWN -Each press will decrease the volume.
0 Volume UP -Each press will increase the volume.
()
Track DOWN -Press to restart the current track or to back up to previous tracks.
(!)Track UP -Press to advance to the next track.
f)
Bluetooth LED
9 Power LED -Push
to
reset all functions.
O Power
E)Volume DOWN
TrackDOWN()
Power
LED
(RESET) Q
Bluetooth
Device
Pairing
PLAY I
PAUSEfJ
Volume
uPe
f)Biuetooth
LED
The
pairing
process
can
vary
based
on
your
particular
device. Refer
to
the
operating
instructions
of
your
device.
Below
is
the
general
process
to
connect.
The Pro Armor Sound bar unit can be powered on either with the power button or with
the orange remote turn on wire.
During unit power up, the blue LED on the right
of
the control panel will blink indicating
that
it
is
in
Bluetooth search mode.
During this process "PROARMOR" should show up
in
your list
of
Bluetooth devices
when the search has connected with your device. When the connection is made the
blue LED will change to solid.
Once a device has been paired the unit will reconnect at power up if the device
is
in
range.
To
connect to a different device, the first device will need to be disconnected.
When a phone call is received, the audio signal will mute but not disconnect.
To
switch to 3.5mm press the power button for three sec.
To
switch back to BT press the power button again for three sec.
www.proarmor.com
PA
SBAR QSG
01
-rev2
802084
Table of contents
