PROLUDIC OUNO J5804 Manual

OUNO by Proludic
(technical specification) J5804
1- The 70mm square posts are made of laminated timber with autoclave treatment.
Splinter-free, the laminate provides great strength and dimensional stability. The posts
are protected from wear and tear caused by fungi and insects. The posts are protected
by polyamide cap.
2- The roof and wall panels are made up of boards of pine with autoclave treatment,
105x25mm or 140x27mm.
3- The climbing wall and platforms are 18mm plywood panels made up of layers of
birch. The surface is coated with a film of non-slip phenolic resin.
4- The slide is made of rotomoulded polyethylene.
5- The 30mm diameter tubes are made of painted metallic steel.
6- The boom is made of painted metallic steel.

7- The 16mm diameter ropes are made of galvanised steel cable covered with polyester.
The cables are linked together and held in place by injected polyamide spheres.
8- The climbing holds are made of polypropylene. They are non-toxic, inflammable and
shock and UV resistant.
9- The fixings are made of stainless or plated steel and protected by anti-vandalism
polyamide caps.