promethean APTASBB650-130 User manual

1 2
34
5 6
2x M6
4x self tapping
screws
4x M4
Optional
1x
1x
1x 1x
4x M6
Optional
4x M6
4x M4
4x
Safety warnings, contents of the box, tools needed
Remove application cover (optional) Remove wall-frame covers
Remove wall bracket Mount bottom wall bracket level to the wall
Lift ActivPanel Adjustable Stand on wall
bracket, mark top holes. Take ActivPanel
Adjustable Stand down and drill holes.
Fix ActivPanel Adjustable Stand at the top.
Then level and fix at the bottom.
2x M6
2x M6
Installation should only be performed by a Qualified Installation Professional
*Fasteners not included. Use
fasteners according to
installation wall. For non-load
bearing wall use APTFSBB650
Floor Support (not included)
1
2
3
1
2
See Box 4 instructions. *Fasteners not
included. Use fasteners according to
installation wall. For non-load bearing
wall use APTFSBB650 Floor Support
(not included)
x4
x4
TP-1950-V04 ©2016 Promethean Ltd. All Rights Reserved. Products are subject to availability by country.
Product specifications are subject to change without notice.
ActivPanel Adjustable Stand 650
APTASBB650-130 - for use with ActivPanels™ with a mass* of 67kg to 127kg
Installation Guide

7
9
8
Set the balance, use a drill-driver with a 13 mm socket on 2 outer springs marked green
Drive counter clockwise 5 seconds each until balanced
support.prometheanworld.com
4x M4
4x
4x M6
Mount wall frame covers and Application
cover (optional)
Attach ActivPanel using APTVMBB650 VESA
Mount (Not Included)
TP-1950-V04 ©2016 Promethean Ltd. All Rights Reserved. Products are subject to availability by country.
Product specifications are subject to change without notice.
ActivPanel Adjustable Stand 650
APTASBB650-130 - for use with ActivPanels™ with a mass* of 67kg to 127kg
Installation Guide
TP-1950 -V04
*Total mass of ActivPanel, VESA mount and any accessories attached to the ActivPanel™